USB mounting in ARM based LPC3250 controller
Hi,
I am having LPC3250 board,which i have configured in Host mode,using the menuconfig(linux kerenl 2.6.34).When i am attaching a USB device to the usb port,the device is getting detected which i am think based on my below observation 1.USB led blinking 2.In the linux ported on lpc3250 board file system when i am using this command mdev -s , sda is appearing in the dev directory But when i try to mount the usb using this command mount /dev/sda1 /media1 it is giving this problem as mentioned below usb 1-1: reset full speed USB device using usb-ohci and address 10 usb 1-1: reset full speed USB device using usb-ohci and address 10 usb 1-1: reset full speed USB device using usb-ohci and address 10 usb 1-1: reset full speed USB device using usb-ohci and address 10 usb 1-1: reset full speed USB device using usb-ohci and address 10 usb 1-1: reset full speed USB device using usb-ohci and address 10 usb 1-1: reset full speed USB device using usb-ohci and address 10 sd 8:0:0:0: [sda] Unhandled error code sd 8:0:0:0: [sda] Result: hostbyte=0x07 driverbyte=0x00 sd 8:0:0:0: [sda] CDB: cdb[0]=0x28: 28 00 00 00 00 02 00 00 02 00 end_request: I/O error, dev sda, sector 2 EXT2-fs (sda): error: unable to read superblock usb 1-1: reset full speed USB device using usb-ohci and address 10 usb 1-1: reset full speed USB device using usb-ohci and address 10 usb 1-1: reset full speed USB device using usb-ohci and address 10 usb 1-1: reset full speed USB device using usb-ohci and address 10 usb 1-1: reset full speed USB device using usb-ohci and address 10 usb 1-1: reset full speed USB device using usb-ohci and address 10 sd 8:0:0:0: [sda] Unhandled error code sd 8:0:0:0: [sda] Result: hostbyte=0x07 driverbyte=0x00 sd 8:0:0:0: [sda] CDB: cdb[0]=0x28: 28 00 00 00 00 00 00 00 08 00 end_request: I/O error, dev sda, sector 0 Buffer I/O error on device sda, logical block 0 usb 1-1: reset full speed USB device using usb-ohci and address 10 usb 1-1: reset full speed USB device using usb-ohci and address 10 usb 1-1: reset full speed USB device using usb-ohci and address 10 usb 1-1: reset full speed USB device using usb-ohci and address 10 usb 1-1: reset full speed USB device using usb-ohci and address 10 usb 1-1: reset full speed USB device using usb-ohci and address 10 sd 8:0:0:0: [sda] Unhandled error code sd 8:0:0:0: [sda] Result: hostbyte=0x07 driverbyte=0x00 sd 8:0:0:0: [sda] CDB: cdb[0]=0x28: 28 00 00 00 00 00 00 00 10 00 end_request: I/O error, dev sda, sector 0 Buffer I/O error on device sda, logical block 0 Buffer I/O error on device sda, logical block 1 usb 1-1: reset full speed USB device using usb-ohci and address 10 usb 1-1: reset full speed USB device using usb-ohci and address 10 usb 1-1: reset full speed USB device using usb-ohci and address 10 usb 1-1: reset full speed USB device using usb-ohci and address 10 usb 1-1: reset full speed USB device using usb-ohci and address 10 usb 1-1: reset full speed USB device using usb-ohci and address 10 sd 8:0:0:0: [sda] Unhandled error code sd 8:0:0:0: [sda] Result: hostbyte=0x07 driverbyte=0x00 sd 8:0:0:0: [sda] CDB: cdb[0]=0x28: 28 00 00 00 00 08 00 00 10 00 end_request: I/O error, dev sda, sector 8 Buffer I/O error on device sda, logical block 1 Buffer I/O error on device sda, logical block 2 usb 1-1: reset full speed USB device using usb-ohci and address 10 usb 1-1: reset full speed USB device using usb-ohci and address 10 usb 1-1: reset full speed USB device using usb-ohci and address 10 usb 1-1: reset full speed USB device using usb-ohci and address 10 usb 1-1: reset full speed USB device using usb-ohci and address 10 usb 1-1: reset full speed USB device using usb-ohci and address 10 sd 8:0:0:0: [sda] Unhandled error code sd 8:0:0:0: [sda] Result: hostbyte=0x07 driverbyte=0x00 sd 8:0:0:0: [sda] CDB: cdb[0]=0x28: 28 00 00 00 00 10 00 00 10 00 end_request: I/O error, dev sda, sector 16 Buffer I/O error on device sda, logical block 2 Buffer I/O error on device sda, logical block 3 usb 1-1: reset full speed USB device using usb-ohci and address 10 usb 1-1: reset full speed USB device using usb-ohci and address 10 usb 1-1: reset full speed USB device using usb-ohci and address 10 usb 1-1: reset full speed USB device using usb-ohci and address 10 usb 1-1: reset full speed USB device using usb-ohci and address 10 usb 1-1: reset full speed USB device using usb-ohci and address 10 sd 8:0:0:0: [sda] Unhandled error code sd 8:0:0:0: [sda] Result: hostbyte=0x07 driverbyte=0x00 sd 8:0:0:0: [sda] CDB: cdb[0]=0x28: 28 00 00 00 00 18 00 00 08 00 end_request: I/O error, dev sda, sector 24 Buffer I/O error on device sda, logical block 3 usb 1-1: reset full speed USB device using usb-ohci and address 10 usb 1-1: reset full speed USB device using usb-ohci and address 10 usb 1-1: reset full speed USB device using usb-ohci and address 10 usb 1-1: reset full speed USB device using usb-ohci and address 10 usb 1-1: reset full speed USB device using usb-ohci and address 10 usb 1-1: reset full speed USB device using usb-ohci and address 10 sd 8:0:0:0: [sda] Unhandled error code sd 8:0:0:0: [sda] Result: hostbyte=0x07 driverbyte=0x00 sd 8:0:0:0: [sda] CDB: cdb[0]=0x28: 28 00 00 00 00 00 00 00 01 00 end_request: I/O error, dev sda, sector 0 FAT: unable to read boot sector usb 1-1: reset full speed USB device using usb-ohci and address 10 usb 1-1: reset full speed USB device using usb-ohci and address 10 usb 1-1: reset full speed USB device using usb-ohci and address 10 usb 1-1: reset full speed USB device using usb-ohci and address 10 usb 1-1: reset full speed USB device using usb-ohci and address 10 usb 1-1: reset full speed USB device using usb-ohci and address 10 sd 8:0:0:0: [sda] Unhandled error code sd 8:0:0:0: [sda] Result: hostbyte=0x07 driverbyte=0x00 sd 8:0:0:0: [sda] CDB: cdb[0]=0x28: 28 00 00 00 00 00 00 00 01 00 end_request: I/O error, dev sda, sector 0 FAT: unable to read boot sector mount: mounting /dev/sda on /media failed: Input/output error usb 1-1: reset full speed USB device using usb-ohci and address 4 usb 1-1: reset full speed USB device using usb-ohci and address 4 usb 1-1: reset full speed USB device using usb-ohci and address 4 usb 1-1: reset full speed USB device using usb-ohci and address 4 usb 1-1: reset full speed USB device using usb-ohci and address 4 usb 1-1: reset full speed USB device using usb-ohci and address 4 sd 2:0:0:0: [sda] Unhandled error code sd 2:0:0:0: [sda] Result: hostbyte=0x07 driverbyte=0x00 sd 2:0:0:0: [sda] CDB: cdb[0]=0x28: 28 00 00 00 00 00 00 00 08 00 end_request: I/O error, dev sda, sector 0 Buffer I/O error on device sda, logical block 0 usb 1-1: reset full speed USB device using usb-ohci and address 4 usb 1-1: reset full speed USB device using usb-ohci and address 4 usb 1-1: reset full speed USB device using usb-ohci and address 4 usb 1-1: reset full speed USB device using usb-ohci and address 4 usb 1-1: reset full speed USB device using usb-ohci and address 4 usb 1-1: reset full speed USB device using usb-ohci and address 4 sd 2:0:0:0: [sda] Unhandled error code sd 2:0:0:0: [sda] Result: hostbyte=0x07 driverbyte=0x00 sd 2:0:0:0: [sda] CDB: cdb[0]=0x28: 28 00 00 00 00 00 00 00 10 00 end_request: I/O error, dev sda, sector 0 Buffer I/O error on device sda, logical block 0 Buffer I/O error on device sda, logical block 1 usb 1-1: reset full speed USB device using usb-ohci and address 4 usb 1-1: reset full speed USB device using usb-ohci and address 4 usb 1-1: reset full speed USB device using usb-ohci and address 4 usb 1-1: reset full speed USB device using usb-ohci and address 4 usb 1-1: reset full speed USB device using usb-ohci and address 4 usb 1-1: reset full speed USB device using usb-ohci and address 4 sd 2:0:0:0: [sda] Unhandled error code sd 2:0:0:0: [sda] Result: hostbyte=0x07 driverbyte=0x00 sd 2:0:0:0: [sda] CDB: cdb[0]=0x28: 28 00 00 00 00 08 00 00 10 00 end_request: I/O error, dev sda, sector 8 Buffer I/O error on device sda, logical block 1 Buffer I/O error on device sda, logical block 2 usb 1-1: reset full speed USB device using usb-ohci and address 4 usb 1-1: reset full speed USB device using usb-ohci and address 4 usb 1-1: reset full speed USB device using usb-ohci and address 4 usb 1-1: reset full speed USB device using usb-ohci and address 4 usb 1-1: reset full speed USB device using usb-ohci and address 4 usb 1-1: reset full speed USB device using usb-ohci and address 4 sd 2:0:0:0: [sda] Unhandled error code sd 2:0:0:0: [sda] Result: hostbyte=0x07 driverbyte=0x00 sd 2:0:0:0: [sda] CDB: cdb[0]=0x28: 28 00 00 00 00 10 00 00 10 00 end_request: I/O error, dev sda, sector 16 Buffer I/O error on device sda, logical block 2 Buffer I/O error on device sda, logical block 3 usb 1-1: reset full speed USB device using usb-ohci and address 4 usb 1-1: reset full speed USB device using usb-ohci and address 4 usb 1-1: reset full speed USB device using usb-ohci and address 4 usb 1-1: reset full speed USB device using usb-ohci and address 4 usb 1-1: reset full speed USB device using usb-ohci and address 4 usb 1-1: reset full speed USB device using usb-ohci and address 4 sd 2:0:0:0: [sda] Unhandled error code sd 2:0:0:0: [sda] Result: hostbyte=0x07 driverbyte=0x00 sd 2:0:0:0: [sda] CDB: cdb[0]=0x28: 28 00 00 00 00 18 00 00 08 00 end_request: I/O error, dev sda, sector 24 Buffer I/O error on device sda, logical block 3 usb 1-1: reset full speed USB device using usb-ohci and address 4 usb 1-1: reset full speed USB device using usb-ohci and address 4 usb 1-1: reset full speed USB device using usb-ohci and address 4 usb 1-1: reset full speed USB device using usb-ohci and address 4 mount: mounting /dev/sda on /media/ failed: Invalid argument Please help me out with this problem as i am struck in it for over a month. Please do need full |
Please post your thread in only one forum. Posting a single thread in the most relevant forum will make it easier for members to help you and will keep the discussion in one place. This thread should be closed because it is a duplicate of http://www.linuxquestions.org/questi...er-4175453213/.
|
All times are GMT -5. The time now is 03:35 PM. |