dear sir,

please solve this porblem on reboot to load zimage




Redboot - Loading Kernel Image & File Jffs2

--------------------------------------------------------------------------------

I had been trying to use Redboot so that I can bring Kernel Image(zImage) and

File System(jffs2) to my target board through redboot. I have done following

things after ping working fine -

1. created /tftpboot directory on host(Linux v2.6.8)
Sinked Kernel Image(zImage)and ipaqjffs2.img(Jffs2
file image)
2. My "reset" command for redboot shows -
RAM: 0xa0000000-0xa4000000, 0xa0013f48-0xa3ebd000
available
FLASH: 0x00000000 - 0x02000000, 128 blocks of
0x00040000 bytes each.
3. fis list -
Name FLASH addr Mem addr Length Entry point
RedBoot 0x00000000 0x00000000 0x00040000 0x00000000
Rb config 0x01F80000 0x01F80000 0x00001000 0x00000000
FIS dir 0x01FC0000 0x01FC0000 0x00040000 0x00000000

--------Error-------
When I try doing "load" for zImage, I get following -
RedBoot> load -b 0x01FC0000 /tftpboot/zImage
Specified address (0x01fc0000) is not believed to be in RAM - continue (y/n)? y
Unrecognized image type: 0xe1a00000

and also after modifying "load" I get following -
load -r -b 0x00080600 zImage
Specified address (0x00080600) is not believed to be in RAM - continue (y/n)? y
Can't load 'zImage': operation timed out
--------------

What is urgent about that? Please use the topic title to describe the issue.

And sorry, I don't know the answer.

Urgent...

If you were to edit and change the title of your thread, you would get a better response.

http://www.linuxquestions.org/linux/...Ask_a_Question

If it's so urgent, why didn't you search Google for it (lots of info there), and search THIS VERY SITE, where this same question has been asked and answered before???