OK, here is my menu.lst, also included my boot.msg file since it boots into KDE, but not any other services.
# Modified by YaST2. Last modification on Sun Jan 25 19:32:44 2004
color white/blue black/light-gray
default 0
gfx
menu (hd0,1)/boot/message
timeout 8
title linux-2.6.1
kernel (hd0,1)/boot/vmlinuz root=/dev/hda2
initrd (hd0,1)/boot/initrd-2.6.1.img
---REST OF FILE EDITED OUT---
-----boot.msg-----
Inspecting /boot/System.map-2.6.1
Loaded 28516 symbols from /boot/System.map-2.6.1.
Symbols match kernel version 2.6.1.
No module symbols loaded - kernel modules not enabled.
klogd 1.4.1, log source = ksyslog started.
<4>Linux version 2.6.1 (root@squirrel) (gcc version 3.3 20030226 (prerelease) (SuSE Linux)) #3 SMP Sun Jan 25 21:10:24 CST 2004
<6>BIOS-provided physical RAM map:
<4> BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
<4> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
<4> BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
<4> BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
<4> BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
<4> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
<5>511MB LOWMEM available.
<4>On node 0 totalpages: 131056
<4> DMA zone: 4096 pages, LIFO batch:1
<4> Normal zone: 126960 pages, LIFO batch:16
<4> HighMem zone: 0 pages, LIFO batch:1
<6>DMI 2.3 present.
<6>ACPI: RSDP (v000 BIOSTA ) @ 0x000f7af0
<6>ACPI: RSDT (v001 BIOSTA AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3000
<6>ACPI: FADT (v001 BIOSTA AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3040
<6>ACPI: DSDT (v001 VIA694 AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
<4>Building zonelist for node : 0
<4>Kernel command line: splash=silent root=/dev/hda2
<4>Local APIC disabled by BIOS -- reenabling.
<4>Found and enabled local APIC!
<6>Initializing CPU#0
<4>PID hash table entries: 2048 (order 11: 16384 bytes)
<4>Detected 1403.323 MHz processor.
<6>Using tsc for high-res timesource
<4>Console: colour VGA+ 80x25
<6>Memory: 513752k/524224k available (2825k kernel code, 9700k reserved, 963k data, 176k init, 0k highmem)
<4>Checking if this processor honours the WP bit even in supervisor mode... Ok.
<4>Calibrating delay loop... 2768.89 BogoMIPS
<6>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
<4>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
<4>Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
<6>checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
<6>Freeing initrd memory: 32k freed
<7>CPU: After generic identify, caps: 0383fbff c1cbfbff 00000000 00000000
<7>CPU: After vendor identify, caps: 0383fbff c1cbfbff 00000000 00000000
<6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
<6>CPU: L2 Cache: 256K (64 bytes/line)
<7>CPU: After all inits, caps: 0383fbff c1cbfbff 00000000 00000020
<6>Intel machine check architecture supported.
<6>Intel machine check reporting enabled on CPU#0.
<6>Enabling fast FPU save and restore... done.
<6>Enabling unmasked SIMD FPU exception support... done.
<6>Checking 'hlt' instruction... OK.
<4>POSIX conformance testing by UNIFIX
<4>CPU0: AMD Athlon(tm) XP 1600+ stepping 02
<4>per-CPU timeslice cutoff: 731.36 usecs.
<4>task migration cache decay timeout: 1 msecs.
<5>SMP motherboard not detected.
<4>enabled ExtINT on CPU#0
<4>ESR value before enabling vector: 00000000
<4>ESR value after enabling vector: 00000000
<4>Using local APIC timer interrupts.
<4>calibrating APIC timer ...
<4>..... CPU clock speed is 1403.0013 MHz.
<4>..... host bus clock speed is 267.0240 MHz.
<4>Starting migration thread for cpu 0
<4>CPUS done 8
<6>NET: Registered protocol family 16
<6>PCI: PCI BIOS revision 2.10 entry at 0xfb380, last bus=1
<6>PCI: Using configuration type 1
<6>mtrr: v2.0 (20020519)
<6>ACPI: Subsystem revision 20031002
<4>spurious 8259A interrupt: IRQ7.
<6>ACPI: Interpreter enabled
<6>ACPI: Using PIC for interrupt routing
<6>ACPI: PCI Root Bridge [PCI0] (00:00)
<4>PCI: Probing PCI hardware (bus 00)
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
<4>ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 11 *12 14 15)
<6>Linux Plug and Play Support v0.97 (c) Adam Belay
<5>SCSI subsystem initialized
<6>drivers/usb/core/usb.c: registered new driver usbfs
<6>drivers/usb/core/usb.c: registered new driver hub
<4>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 12
<4>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
<4>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
<6>PCI: Using ACPI for IRQ routing
<6>PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
<6>Machine check exception polling timer started.
<6>Installing knfsd (copyright (C) 1996
okir@monad.swb.de).
<5>udf: registering filesystem
<6>Initializing Cryptographic API
<6>Applying VIA southbridge workaround.
<6>PCI: Disabling Via external APIC routing
<6>ACPI: Power Button (FF) [PWRF]
<6>ACPI: Sleep Button (CM) [SLPB]
<6>ACPI: Processor [CPU0] (supports C1 C2, 2 throttling states)
<4>pty: 256 Unix98 ptys configured
<7>request_module: failed /sbin/modprobe -- parport_lowlevel. error = -16
<6>lp: driver loaded but no devices found
<6>Linux agpgart interface v0.100 (c) Dave Jones
<3>[drm:drm_init] *ERROR* Cannot initialize the agpgart module.
<6>Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
<4>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
<4>ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
<6>parport0: PC-style at 0x378 [PCSPP,EPP]
<7>parport0: cpp_daisy: aa5500ff(38)
<7>parport0: assign_addrs: aa5500ff(38)
<7>parport0: cpp_daisy: aa5500ff(38)
<7>parport0: assign_addrs: aa5500ff(38)
<6>lp0: using parport0 (polling).
<6>parport_pc: Via 686A parallel port: io=0x378
<4>Using anticipatory io scheduler
<6>Floppy drive(s): fd0 is 1.44M
<6>FDC 0 is a post-1991 82077
<6>8139too Fast Ethernet driver 0.9.26
<6>eth0: RealTek RTL8139 at 0xe0806000, 00:02:2a:c2:10:47, IRQ 11
<7>eth0: Identified 8139 chip type 'RTL-8139C'
<6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
<6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
<4>hda: WDC AC35100L, ATA DISK drive
<4>hdc: TOSHIBA DVD-ROM SD-M1202, ATAPI CD/DVD-ROM drive
<4>hdd: CW038D ATAPI CD-R/RW, ATAPI CD/DVD-ROM drive
<4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
<4>ide1 at 0x170-0x177,0x376 on irq 15
<4>hda: max request size: 128KiB
<6>hda: 10085040 sectors (5163 MB) w/256KiB Cache, CHS=10672/15/63
<6> hda: hda1 hda2
<4>hdc: ATAPI 32X DVD-ROM drive, 256kB Cache
<6>Uniform CD-ROM driver Revision: 3.12
<4>hdd: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache
<6>drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.1
<6>uhci_hcd 0000:00:07.2: UHCI Host Controller
<6>uhci_hcd 0000:00:07.2: irq 12, io base 0000c400
<6>uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
<6>hub 1-0:1.0: USB hub found
<6>hub 1-0:1.0: 2 ports detected
<6>uhci_hcd 0000:00:07.3: UHCI Host Controller
<6>uhci_hcd 0000:00:07.3: irq 12, io base 0000c800
<6>uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 2
<6>hub 2-0:1.0: USB hub found
<6>hub 2-0:1.0: 2 ports detected
<6>drivers/usb/core/usb.c: registered new driver usblp
<6>drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
<6>Initializing USB Mass Storage driver...
<6>drivers/usb/core/usb.c: registered new driver usb-storage
<6>USB Mass Storage support registered.
<6>drivers/usb/core/usb.c: registered new driver hid
<6>drivers/usb/input/hid-core.c: v2.0:USB HID core driver
<6>mice: PS/2 mouse device common for all mice
<6>serio: i8042 AUX port at 0x60,0x64 irq 12
<6>serio: i8042 KBD port at 0x60,0x64 irq 1
<6>input: AT Translated Set 2 keyboard on isa0060/serio0
<6>Advanced Linux Sound Architecture Driver Version 0.9.7 (Thu Sep 25 19:16:36 2003 UTC).
<7>request_module: failed /sbin/modprobe -- snd-card-0. error = -16
<6>ALSA device list:
<6> No soundcards found.
<6>NET: Registered protocol family 2
<6>IP: routing cache hash table of 4096 buckets, 32Kbytes
<6>TCP: Hash tables configured (established 32768 bind 32768)
<6>NET: Registered protocol family 1
<6>NET: Registered protocol family 17
<7>PM: Reading pmdisk image.
<7>PM: Resume from disk failed.
<6>ACPI: (supports S0 S1 S4 S5)
<4>found reiserfs format "3.6" with standard journal
<6>hub 2-0:1.0: new USB device on port 1, assigned address 2
<4>drivers/usb/input/hid-core.c: ctrl urb status -32 received
<6>input: USB HID v1.10 Joystick [Logitech Logitech Freedom 2.4] on usb-0000:00:07.3-1
<4>Reiserfs journal params: device hda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
<4>reiserfs: checking transaction log (hda2) for (hda2)
<4>Using r5 hash to sort names
<4>VFS: Mounted root (reiserfs filesystem) readonly.
<6>Freeing unused kernel memory: 176k freed
<6>hub 1-0:1.0: new USB device on port 1, assigned address 2
<4>HID device not claimed by input or hiddev
<4>hid: probe of 1-1:1.0 failed with error -5
<6>hub 1-0:1.0: new USB device on port 2, assigned address 3
<4>drivers/usb/input/hid-core.c: ctrl urb status -32 received
<6>input: USB HID v1.11 Mouse [Microsoft Microsoft Wireless Optical Mouse® 1.0A] on usb-0000:00:07.2-2
<7>request_module: failed /sbin/modprobe -- char-major-4-72. error = 256
<6>Adding 529160k swap on /dev/hda1. Priority:42 extents:1
<7>request_module: failed /sbin/modprobe -- char-major-10-135. error = 256
Kernel logging (ksyslog) stopped.
Kernel log daemon terminating.
Boot logging started on /dev/tty1(/dev/console) at Mon Jan 26 04:34:14 2004
Configuring serial ports...
ttyS0 at 0x03f8 (irq = 4) is a 16550A
ttyS1 at 0x02f8 (irq = 3) is a 16550A
Configured serial ports
doneshowconsole: Warning: the ioctl TIOCGDEV is not known by the kernel
Run file system check on root for LVM activation
doneRemounting root file system (/) read/write for vgscan...
Scanning for LVM volume groups...
vgscan -- LVM driver/module not loaded?
Activating LVM volume groups...
vgchange -- LVM driver/module not loaded?
done
Activating swap-devices in /etc/fstab...
doneshowconsole: Warning: the ioctl TIOCGDEV is not known by the kernel
Checking file systems...
fsck 1.34 (25-Jul-2003)
Reiserfs super block in block 16 on 0x302 of format 3.6 with standard journal
Blocks (total/free): 1128330/156401 by 4096 bytes
Filesystem is clean
doneMounting local file systems...
proc on /proc type proc (rw)
devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
nothing was mounted
doneLoading required kernel modules
FATAL: Module cdrom not found.
FATAL: Module ide_cd not found.
FATAL: Module ide_scsi not found.
failedSetting up IDE DMA mode
/dev/hdc:
setting using_dma to 0 (off)
HDIO_SET_DMA failed: Operation not permitted
using_dma = 0 (off)
failed
Restore device permissions
done
Activating remaining swap-devices in /etc/fstab...
doneSetting up the CMOS clock
done
Setting up timezone data
done
Setting up hostname 'squirrel'
done
Setting up loopback interface
done
Cleaning up using /sbin/modify_resolvconf:
restored /etc/resolv.conf from /etc/resolv.conf.saved.by.dhcpcd
..failedReloading name server BIND 9 - Warning: named not running!
done
Disabling IP forwarding
done
Creating /var/log/boot.msg
doneshowconsole: Warning: the ioctl TIOCGDEV is not known by the kernel
<notice>killproc: kill(64,29)
Running /etc/init.d/boot.local
done<notice>killproc: kill(64,3)
INIT: Entering runlevel: 5
Boot logging started on /dev/tty1(/dev/console) at Mon Jan 26 10:34:25 2004
Master Resource Control: previous runlevel: N, switching to runlevel:
5
<notice>/etc/init.d/rc5.d/S01alsasound start
Starting sound driver: already running
done
<notice>'/etc/init.d/rc5.d/S01alsasound start' exits with status 0
<notice>/etc/init.d/rc5.d/S01atd start
Starting service at daemon<notice>startproc: execve (/usr/sbin/atd) [ /usr/sbin/atd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=18 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin
failed
<notice>'/etc/init.d/rc5.d/S01atd start' exits with status 7
RUNLEVEL=5<notice> PWD=/ PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent/etc/init.d/rc5.d/S01fbset start sscripts=39
_=/sbin/startproc DAEMON=/usr/sbin/atd ]
<notice>'/etc/init.d/rc5.d/S01fbset start' exits with status 0
<notice>/etc/init.d/rc5.d/S01isdn start
<notice>'/etc/init.d/rc5.d/S01isdn start' exits with status 0
<notice>/etc/init.d/rc5.d/S01random start
Initializing random number generator
done
<notice>'/etc/init.d/rc5.d/S01random start' exits with status 0
<notice>/etc/init.d/rc5.d/S01rpmconfigcheck start
<notice>'/etc/init.d/rc5.d/S01rpmconfigcheck start' exits with status 0
<notice>/etc/init.d/rc5.d/S02joystick start
Starting joystick driverFATAL: Error inserting ns558 (/lib/modules/2.6.1/kernel/drivers/input/gameport/ns558.ko): No such device
FATAL: Module adi not found.
done
<notice>'/etc/init.d/rc5.d/S02joystick start' exits with status 0
<notice>/etc/init.d/rc5.d/S02splash start
<notice>'/etc/init.d/rc5.d/S02splash start' exits with status 5
<notice>/etc/init.d/rc5.d/S05network start
Setting up network interfaces:
lo
done
eth0 (DHCP) <notice>startproc: execve (/sbin/dhcpcd) [ /sbin/dhcpcd -H -D -N -t 999999
failed
-h<notice>'/etc/init.d/rc5.d/S05network start' exits with status 0
<notice> squirrel/etc/init.d/rc5.d/S06syslog start eth0
], [ CONSOLE=/dev/console TERM=linuxStarting syslog services SHELL=/bin/sh OLDPWD=/etc/sysconfig/network progress=25 INIT_VERSION=sysvinit-2.82 RUN_FROM_RC=yes REDIRECT=/dev/tty1 COLUMNS=80 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/etc/sysconfig/network/scripts RUNLEVEL=5<notice> PWD=/etc/sysconfig/network PREVLEVEL=N LINES=25 HOME=/ SHLVL=4 splash=silent sscripts=39 _=/sbin/startproc DAEMON=/sbin/dhcpcd ]
startproc: execve (/sbin/syslogd) [ /sbin/syslogd -a /var/lib/named/dev/log ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=26 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent sscripts=39 _=/sbin/startproc DAEMON=/sbin/syslogd ]
failed
<notice>'/etc/init.d/rc5.d/S06syslog start' exits with status 7
<notice>/etc/init.d/rc5.d/S07hotplug start
Starting hotplugging services [<notice>pidofproc: dhcpcd 728
ieee1394 net pci usb^G .... ]
failed
<notice>'/etc/init.d/rc5.d/S07hotplug start' exits with status 1
<notice>/etc/init.d/rc5.d/S08resmgr start
Starting resource manager<notice>startproc: execve (/sbin/resmgrd) [ /sbin/resmgrd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=28
failed
<notice>'/etc/init.d/rc5.d/S08resmgr start' exits with status 7
INIT_VERSION=sysvinit-2.82<notice> REDIRECT=/dev/tty1/etc/init.d/rc5.d/S09portmap start COLUMNS=80
PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/binStarting RPC portmap daemon<notice> RUNLEVEL=5 PWD=/ PREVLEVEL=Nstartproc: execve (/sbin/portmap) [ LINES=25 /sbin/portmap HOME=/ ], [ SHLVL=2 CONSOLE=/dev/console splash=silent
failed
<notice>'/etc/init.d/rc5.d/S09portmap start' exits with status 7
<notice> TERM=linux sscripts=39/etc/init.d/rc5.d/S09smbfs start _=/sbin/startproc
DAEMON=/sbin/resmgrd SHELL=/bin/sh ]
Mount SMB File System progress=29
unused
INIT_VERSION=sysvinit-2.82<notice>'/etc/init.d/rc5.d/S09smbfs start' exits with status 6
<notice>/etc/init.d/rc5.d/S09splash_early start
<notice>'/etc/init.d/rc5.d/S09splash_early start' exits with status 0
REDIRECT=/dev/tty1 COLUMNS=80 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=25 HOME=/ SHLVL=2<notice>/etc/init.d/rc5.d/S09sshd start
splash=silent sscripts=39 _=/sbin/startprocStarting SSH daemon DAEMON=/sbin/portmap<notice> ]
startproc: execve (/usr/sbin/sshd) [
failed
<notice>'/etc/init.d/rc5.d/S09sshd start' exits with status 7
<notice>/etc/init.d/rc5.d/S10cups start
/usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=32 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent sscripts=39 _=/sbin/startproc DAEMON=/usr/sbin/sshd ]
Starting cupsd<notice>startproc: execve (/usr/sbin/cupsd) [
failed
/usr/sbin/cupsd<notice> ], ['/etc/init.d/rc5.d/S10cups start' exits with status 7 CONSOLE=/dev/console
TERM=linux<notice>/etc/init.d/rc5.d/S10nscd start
SHELL=/bin/sh progress=33Starting Name Service Cache Daemon INIT_VERSION=sysvinit-2.82<notice> REDIRECT=/dev/tty1startproc: execve (/usr/sbin/nscd) [
failed
/usr/sbin/nscd<notice> ], ['/etc/init.d/rc5.d/S10nscd start' exits with status 7 CONSOLE=/dev/console
TERM=linux COLUMNS=80 SHELL=/bin/sh PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin progress=34<notice>/etc/init.d/rc5.d/S10postfix start
RUNLEVEL=5 INIT_VERSION=sysvinit-2.82 PWD=/Starting mail service (Postfix) PREVLEVEL=N REDIRECT=/dev/tty1 LINES=25 COLUMNS=80 HOME=/ PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin SHLVL=2 RUNLEVEL=5 splash=silent PWD=/ sscripts=39 PREVLEVEL=N _=/sbin/startproc LINES=25 DAEMON=/usr/sbin/cupsd HOME=/ ]
SHLVL=2 splash=silent sscripts=39 _=/sbin/startproc DAEMON=/usr/sbin/nscd ]
done
<notice>'/etc/init.d/rc5.d/S10postfix start' exits with status 0
<notice>/etc/init.d/rc5.d/S11cron start
Starting CRON daemon<notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [
failed
CONSOLE=/dev/console<notice> TERM=linux'/etc/init.d/rc5.d/S11cron start' exits with status 7 SHELL=/bin/sh
progress=36<notice>/etc/init.d/rc5.d/S11kbd start
INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent sscripts=39 _=/sbin/startproc DAEMON=/usr/sbin/cron ]
Loading keymap qwerty/us.map.gz
doneLoading compose table winkeys shiftctrl latin1.add
done
Loading console font lat1-16.psfu
doneLoading screenmap none
doneSetting up console ttys
done<notice>'/etc/init.d/rc5.d/S11kbd start' exits with status 0
<notice>/etc/init.d/rc5.d/S12hwscan start
<notice>'/etc/init.d/rc5.d/S12hwscan start' exits with status 0
<notice>/etc/init.d/rc5.d/S12splash_late start
<notice>'/etc/init.d/rc5.d/S12splash_late start' exits with status 0
<notice>/etc/init.d/rc5.d/S13xdm start
Starting service kdm<notice>startproc: execve (/opt/kde3/bin/kdm) [ /opt/kde3/bin/kdm
failed
], [<notice> LC_MONETARY='/etc/init.d/rc5.d/S13xdm start' exits with status 1 CONSOLE=/dev/console
TERM=linuxMaster Resource Control: runlevel 5 has been
reached
Failed services in runlevel 5: atd syslog hotplug resmgr portmap sshd cups nscd cron xdm
Skipped services in runlevel 5: splash smbfs
<notice>killproc: kill(552,3)
SHELL=/bin/sh LC_NUMERIC= QTDIR=/usr/lib/qt3 LC_ALL= progress=40 INIT_VERSION=sysvinit-2.82 KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 COLUMNS=80 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin LC_MESSAGES= RUNLEVEL=5 LC_COLLATE=POSIX PWD=/ LANG=en_US PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 no_proxy=localhost RC_LC_COLLATE=POSIX WINDOWMANAGER=/usr/X11R6/bin/kde PRINTER=normal RC_LANG=en_US LC_CTYPE=en_US splash=silent sscripts=39 LC_TIME= _=/sbin/startproc DAEMON=/opt/kde3/bin/kdm ]
------
The never-ending frustration continues
------
