LinuxQuestions.org

LinuxQuestions.org (/questions/)
-   Linux - Newbie (https://www.linuxquestions.org/questions/linux-newbie-8/)
-   -   Unable to start X on my old small laptop (https://www.linuxquestions.org/questions/linux-newbie-8/unable-to-start-x-on-my-old-small-laptop-4175496734/)

gonny95 03-02-2014 08:40 AM
Unable to start X on my old small laptop
 
These are old one and new one

http://oi60.tinypic.com/ejbqeu.jpg

I have installed Slackware in my very small and old laptop through Slackware PXE Server

After installing Linux, everything works fine except starting X

When I type startx,soon appears a black screen with a little blinking

After few seconds

I get these following errors or the whole system is just freeze with no keyboard input

The weirdest part is sometimes I can get into the X with a mouse pointer and wallpaper but after few miliseconds It just get aborted

[CODE]
[ 654.682]
X.Org X Server 1.14.3
Release Date: 2013-09-12
[ 654.682] X Protocol Version 11, Revision 0
[ 654.682] Build Operating System: Slackware 14.1 Slackware Linux Project
[ 654.683] Current Operating System: Linux CSJ 3.10.17 #2 Wed Oct 23 17:46:52 CDT 2013 i686
[ 654.683] Kernel command line: auto BOOT_IMAGE=Linux ro root=802 vt.default_utf8=0
[ 654.683] Build Date: 09 October 2013 09:56:03PM
[ 654.683]
[ 654.684] Current version of pixman: 0.30.2
[ 654.684] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 654.684] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 654.686] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Mar 2 09:40:41 2014
[ 654.705] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 654.706] (==) No Layout section. Using the first Screen section.
[ 654.706] (==) No screen section available. Using defaults.
[ 654.706] (**) |-->Screen "Default Screen Section" (0)
[ 654.706] (**) | |-->Monitor "<default monitor>"
[ 654.707] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 654.707] (==) Automatically adding devices
[ 654.707] (==) Automatically enabling devices
[ 654.707] (==) Automatically adding GPU devices
[ 654.708] (WW) The directory "/usr/share/fonts/local" does not exist.
[ 654.708] Entry deleted from font path.
[ 654.708] (WW) The directory "/usr/share/fonts/CID" does not exist.
[ 654.708] Entry deleted from font path.
[ 654.708] (==) FontPath set to:
/usr/share/fonts/TTF,
/usr/share/fonts/OTF,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/75dpi/:unscaled,
/usr/share/fonts/100dpi/:unscaled,
/usr/share/fonts/75dpi,
/usr/share/fonts/100dpi,
/usr/share/fonts/cyrillic
[ 654.708] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 654.708] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 654.708] (II) Loader magic: 0x82553a0
[ 654.708] (II) Module ABI versions:
[ 654.708] X.Org ANSI C Emulation: 0.4
[ 654.709] X.Org Video Driver: 14.1
[ 654.709] X.Org XInput driver : 19.1
[ 654.709] X.Org Server Extension : 7.0
[ 654.714] (--) PCI:*(0:1:0:0) 1039:6300:1043:1672 rev 49, Mem @ 0xd8000000/134217728, 0xd2800000/131072, I/O @ 0x0000a800/128
[ 654.715] (II) Open ACPI successful (/var/run/acpid.socket)
[ 654.715] Initializing built-in extension Generic Event Extension
[ 654.715] Initializing built-in extension SHAPE
[ 654.715] Initializing built-in extension MIT-SHM
[ 654.716] Initializing built-in extension XInputExtension
[ 654.716] Initializing built-in extension XTEST
[ 654.716] Initializing built-in extension BIG-REQUESTS
[ 654.716] Initializing built-in extension SYNC
[ 654.716] Initializing built-in extension XKEYBOARD
[ 654.717] Initializing built-in extension XC-MISC
[ 654.717] Initializing built-in extension XINERAMA
[ 654.717] Initializing built-in extension XFIXES
[ 654.717] Initializing built-in extension RENDER
[ 654.717] Initializing built-in extension RANDR
[ 654.717] Initializing built-in extension COMPOSITE
[ 654.718] Initializing built-in extension DAMAGE
[ 654.718] Initializing built-in extension MIT-SCREEN-SAVER
[ 654.718] Initializing built-in extension DOUBLE-BUFFER
[ 654.718] Initializing built-in extension RECORD
[ 654.718] Initializing built-in extension DPMS
[ 654.718] Initializing built-in extension X-Resource
[ 654.719] Initializing built-in extension XVideo
[ 654.719] Initializing built-in extension XVideo-MotionCompensation
[ 654.719] Initializing built-in extension XFree86-VidModeExtension
[ 654.719] Initializing built-in extension XFree86-DGA
[ 654.719] Initializing built-in extension XFree86-DRI
[ 654.720] Initializing built-in extension DRI2
[ 654.720] (II) LoadModule: "glx"
[ 654.721] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 654.797] (II) Module glx: vendor="X.Org Foundation"
[ 654.797] compiled for 1.14.3, module version = 1.0.0
[ 654.797] ABI class: X.Org Server Extension, version 7.0
[ 654.797] (==) AIGLX enabled
[ 654.799] Loading extension GLX
[ 654.799] (==) Matched sis as autoconfigured driver 0
[ 654.799] (==) Matched vesa as autoconfigured driver 1
[ 654.799] (==) Matched modesetting as autoconfigured driver 2
[ 654.799] (==) Matched fbdev as autoconfigured driver 3
[ 654.799] (==) Assigned the driver to the xf86ConfigLayout
[ 654.799] (II) LoadModule: "sis"
[ 654.802] (II) Loading /usr/lib/xorg/modules/drivers/sis_drv.so
[ 654.802] (II) Module sis: vendor="X.Org Foundation"
[ 654.802] compiled for 1.14.2, module version = 0.10.7
[ 654.802] Module class: X.Org Video Driver
[ 654.803] ABI class: X.Org Video Driver, version 14.1
[ 654.803] (II) LoadModule: "vesa"
[ 654.806] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 654.806] (II) Module vesa: vendor="X.Org Foundation"
[ 654.806] compiled for 1.14.3, module version = 2.3.3
[ 654.807] Module class: X.Org Video Driver
[ 654.807] ABI class: X.Org Video Driver, version 14.1
[ 654.807] (II) LoadModule: "modesetting"
[ 654.810] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 654.811] (II) Module modesetting: vendor="X.Org Foundation"
[ 654.811] compiled for 1.14.2, module version = 0.8.0
[ 654.811] Module class: X.Org Video Driver

gonny95 03-02-2014 08:41 AM
[ 654.811] ABI class: X.Org Video Driver, version 14.1
[ 654.811] (II) LoadModule: "fbdev"
[ 654.818] (WW) Warning, couldn't open module fbdev
[ 654.818] (II) UnloadModule: "fbdev"
[ 654.819] (II) Unloading fbdev
[ 654.819] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 654.819] (II) SIS: driver for SiS chipsets: SIS5597/5598, SIS530/620,
SIS6326/AGP/DVD, SIS300/305, SIS630/730, SIS540, SIS315, SIS315H,
SIS315PRO/E, SIS550, SIS650/M650/651/740, SIS330(Xabre),
SIS660/[M]661[F|M]X/[M]670/[M]741[GX]/[M]760[GX]/[M]761[GX]/[M]770[GX],
SIS340
[ 654.820] (II) SIS: driver for XGI chipsets: Volari Z7 (XG20),
Volari V3XT/V5/V8/Duo (XG40)
[ 654.820] (II) VESA: driver for VESA chipsets: vesa
[ 654.820] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 654.820] (--) using VT number 7

[ 654.831] (WW) Falling back to old probe method for sis
[ 654.831] (--) Assigning device section with no busID to primary device
[ 654.831] (--) Chipset SIS630/730 found
[ 654.831] (WW) Falling back to old probe method for vesa
[ 654.831] (WW) Falling back to old probe method for modesetting
[ 654.832] (EE) open /dev/dri/card0: No such file or directory
[ 654.910] (II) SIS(0): SiS driver (2005/09/20-1, compiled for X.org 1.14.2.0)
[ 654.910] (II) SIS(0): Copyright (C) 2001-2005 Thomas Winischhofer <thomas@winischhofer.net> and others
[ 654.910] (II) SIS(0): *** See http://www.winischhofer.eu/linuxsisvga.shtml
[ 654.910] (II) SIS(0): *** for documentation and updates.
[ 654.910] (--) SIS(0): sisfb not found
[ 654.910] (--) SIS(0): Relocated I/O registers at 0xA800
[ 654.911] (II) Loading sub module "ramdac"
[ 654.911] (II) LoadModule: "ramdac"
[ 654.911] (II) Module "ramdac" already built-in
[ 654.911] (II) SIS(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 654.912] (==) SIS(0): Depth 24, (--) framebuffer bpp 32
[ 654.912] (==) SIS(0): RGB weight 888
[ 654.912] (==) SIS(0): Default visual is TrueColor
[ 654.912] (WW) SIS(0): Could not find/read video BIOS
[ 654.913] (==) SIS(0): Using HW cursor
[ 654.913] (==) SIS(0): Color HW cursor is disabled
[ 654.913] (==) SIS(0): TurboQueue enabled
[ 654.913] (==) SIS(0): Hotkey display switching is disabled
[ 654.913] (II) SIS(0): WARNING: Using the Hotkey might freeze your machine, regardless
[ 654.913] (II) SIS(0): whether enabled or disabled. This is no driver bug.
[ 654.913] (==) SIS(0): SiSCtrl utility interface is disabled
[ 654.913] (II) SIS(0): For information on SiSCtrl, see
http://www.winischhofer.eu/linuxsispart1.shtml#sisctrl
[ 654.914] (==) SIS(0): DRI enabled
[ 654.914] (II) SIS(0): Checking OS for SSE support is not supported in this version of X.org
[ 654.914] (II) SIS(0): If your OS supports SSE, set the option "UseSSE" to "on".
[ 654.914] (--) SIS(0): Shared Memory Area is on DIMM0
[ 654.914] (--) SIS(0): DRAM type: SDR SDRAM
[ 654.914] (--) SIS(0): Memory clock: 133.634 MHz
[ 654.914] (--) SIS(0): (Adapter assumes MCLK being 133 Mhz)
[ 654.914] (--) SIS(0): DRAM bus width: 64 bit
[ 654.915] (--) SIS(0): Linear framebuffer at 0xD8000000
[ 654.915] (--) SIS(0): MMIO registers at 0xD2800000 (size 64K)
[ 654.915] (--) SIS(0): VideoRAM: 16384 KB
[ 654.915] (II) SIS(0): Using 8192K of framebuffer memory at offset 0K
[ 654.915] (--) SIS(0): Hardware supports two video overlays
[ 654.915] (--) SIS(0): Detected LVDS transmitter (External chip ID 4)
[ 654.957] (--) SIS(0): Detected Chrontel (unknown) TV encoder (ID 0x3f; chip ID 4)
[ 655.030] (--) SIS(0): Chrontel: Detected TV connected to SVIDEO output
[ 656.035] (--) SIS(0): No CRT1/VGA detected
[ 656.035] (--) SIS(0): Detected LCD/plasma panel (1024x600, 11, non-exp., RGB18 [b6e9ff])
[ 656.035] (--) SIS(0): Detected default TV standard NTSC
[ 656.035] (==) SIS(0): Using gamma correction (1.0, 1.0, 1.0)
[ 656.035] (II) SIS(0): CRT1 gamma correction is enabled
[ 656.035] (--) SIS(0): CRT2 gamma correction not supported by hardware
[ 656.035] (--) SIS(0): Memory bandwidth at 32 bpp is 267.268 MHz
[ 656.035] (--) SIS(0): Detected LCD PanelDelayCompensation 0x20
[ 656.036] (II) Loading sub module "ddc"
[ 656.036] (II) LoadModule: "ddc"
[ 656.036] (II) Module "ddc" already built-in
[ 656.036] (--) SIS(0): CRT2 DDC probing failed
[ 656.036] (==) SIS(0): Min pixel clock is 10 MHz
[ 656.036] (--) SIS(0): Max pixel clock is 185 MHz
[ 656.036] (II) SIS(0): Replaced entire mode list with built-in modes
[ 656.036] (II) SIS(0): Correcting missing CRT2 monitor HSync range
[ 656.036] (II) SIS(0): Correcting missing CRT2 monitor VRefresh range
[ 656.036] (II) SIS(0): "Unknown reason" in the following list means that the mode
[ 656.036] (II) SIS(0): is not supported on the chipset/bridge/current output device.
[ 656.036] (II) SIS(0): <default monitor>: Using hsync range of 30.00-80.00 kHz
[ 656.036] (II) SIS(0): <default monitor>: Using vrefresh range of 59.00-61.00 Hz
[ 656.036] (II) SIS(0): <default monitor>: Using vrefresh value of 71.00 Hz
[ 656.036] (WW) SIS(0): Unable to estimate virtual size
[ 656.036] (II) SIS(0): Clock range: 10.00 to 185.45 MHz
[ 656.036] (II) SIS(0): Not using default mode "800x600" (vrefresh out of range)
[ 656.036] (II) SIS(0): Not using default mode "800x600" (vrefresh out of range)
[ 656.037] (II) SIS(0): Not using default mode "800x600" (vrefresh out of range)
[ 656.037] (II) SIS(0): Not using default mode "800x600" (vrefresh out of range)
[ 656.037] (II) SIS(0): Not using default mode "800x600" (vrefresh out of range)
[ 656.037] (II) SIS(0): Not using default mode "800x600" (vrefresh out of range)
[ 656.037] (II) SIS(0): Not using default mode "800x600" (hsync out of range)
[ 656.037] (II) SIS(0): Not using default mode "640x480" (vrefresh out of range)
[ 656.037] (II) SIS(0): Not using default mode "640x480" (vrefresh out of range)
[ 656.037] (II) SIS(0): Not using default mode "640x480" (vrefresh out of range)
[ 656.037] (II) SIS(0): Not using default mode "640x480" (vrefresh out of range)
[ 656.037] (II) SIS(0): Not using default mode "640x480" (vrefresh out of range)
[ 656.037] (II) SIS(0): Not using default mode "640x480" (hsync out of range)
[ 656.037] (II) SIS(0): Not using default mode "640x480" (hsync out of range)
[ 656.037] (II) SIS(0): Not using default mode "720x480" (unknown reason)
[ 656.037] (II) SIS(0): Not using default mode "720x576" (unknown reason)
[ 656.037] (II) SIS(0): Not using default mode "1024x768" (unknown reason)
[ 656.037] (II) SIS(0): Not using default mode "1024x768" (unknown reason)
[ 656.037] (II) SIS(0): Not using default mode "1024x768" (unknown reason)
[ 656.037] (II) SIS(0): Not using default mode "1024x768" (unknown reason)
[ 656.037] (II) SIS(0): Not using default mode "1024x768" (unknown reason)
[ 656.037] (II) SIS(0): Not using default mode "1024x768" (unknown reason)
[ 656.037] (II) SIS(0): Not using default mode "1024x768" (unknown reason)
[ 656.037] (II) SIS(0): Not using default mode "1280x1024" (unknown reason)
[ 656.037] (II) SIS(0): Not using default mode "1280x1024" (unknown reason)
[ 656.037] (II) SIS(0): Not using default mode "1280x1024" (unknown reason)
[ 656.037] (II) SIS(0): Not using default mode "1280x1024" (unknown reason)
[ 656.037] (II) SIS(0): Not using default mode "1600x1200" (unknown reason)
[ 656.038] (II) SIS(0): Not using default mode "1600x1200" (unknown reason)
[ 656.038] (II) SIS(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
[ 656.038] (II) SIS(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
[ 656.038] (II) SIS(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
[ 656.038] (II) SIS(0): Not using default mode "512x384" (unknown reason)
[ 656.038] (II) SIS(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
[ 656.038] (II) SIS(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
[ 656.038] (II) SIS(0): Not using default mode "1280x960" (unknown reason)
[ 656.038] (II) SIS(0): Not using default mode "1280x960" (unknown reason)
[ 656.038] (II) SIS(0): Not using default mode "1152x768" (unknown reason)
[ 656.038] (II) SIS(0): Not using default mode "800x480" (unknown reason)
[ 656.038] (II) SIS(0): Not using default mode "800x480" (unknown reason)
[ 656.038] (II) SIS(0): Not using default mode "800x480" (unknown reason)
[ 656.038] (II) SIS(0): Not using default mode "1024x576" (unknown reason)
[ 656.038] (II) SIS(0): Not using default mode "1024x576" (unknown reason)
[ 656.038] (II) SIS(0): Not using default mode "1024x576" (unknown reason)
[ 656.038] (II) SIS(0): Not using default mode "1280x720" (unknown reason)
[ 656.038] (II) SIS(0): Not using default mode "1280x720" (unknown reason)
[ 656.038] (II) SIS(0): Not using default mode "1280x720" (unknown reason)
[ 656.038] (II) SIS(0): Not using default mode "1152x864" (unknown reason)
[ 656.038] (II) SIS(0): Not using default mode "1152x864" (unknown reason)
[ 656.038] (II) SIS(0): Not using default mode "1152x864" (unknown reason)
[ 656.038] (II) SIS(0): Not using default mode "848x480" (unknown reason)
[ 656.038] (II) SIS(0): Not using default mode "848x480" (unknown reason)
[ 656.038] (II) SIS(0): Not using default mode "856x480" (unknown reason)
[ 656.038] (II) SIS(0): Not using default mode "856x480" (unknown reason)
[ 656.038] (II) SIS(0): Not using default mode "1360x768" (unknown reason)
[ 656.038] (II) SIS(0): Not using default mode "1280x768" (unknown reason)
[ 656.039] (II) SIS(0): Not using default mode "768x576" (unknown reason)
[ 656.039] (II) SIS(0): Not using default mode "1360x1024" (unknown reason)
[ 656.039] (--) SIS(0): Virtual size is 1024x600 (pitch 1024)
[ 656.039] (**) SIS(0): *Default mode "1024x600" (1024x600) (For CRT device: 65.1 MHz, 48.5 kHz, 60.6 Hz)
[ 656.039] (**) SIS(0): *Default mode "800x600" (800x600) (For CRT device: 40.0 MHz, 37.9 kHz, 60.3 Hz)
[ 656.039] (**) SIS(0): *Default mode "640x480" (640x480) (For CRT device: 25.1 MHz, 31.3 kHz, 59.7 Hz)
[ 656.039] (**) SIS(0): *Default mode "640x400" (640x400) (For CRT device: 25.1 MHz, 31.6 kHz, 71.6 Hz)
[ 656.039] (**) SIS(0): *Default mode "400x300" (400x300) (For CRT device: 20.0 MHz, 37.9 kHz, 60.3 Hz (D))
[ 656.039] (**) SIS(0): *Default mode "320x240" (320x240) (For CRT device: 12.5 MHz, 31.3 kHz, 60.7 Hz (D))
[ 656.039] (**) SIS(0): *Default mode "320x200" (320x200) (For CRT device: 12.5 MHz, 31.3 kHz, 70.9 Hz (D))
[ 656.039] (==) SIS(0): DPI set to (96, 96)
[ 656.039] (II) Loading sub module "fb"
[ 656.039] (II) LoadModule: "fb"
[ 656.040] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 656.041] (II) Module fb: vendor="X.Org Foundation"
[ 656.041] compiled for 1.14.3, module version = 1.0.0
[ 656.042] ABI class: X.Org ANSI C Emulation, version 0.4
[ 656.042] (II) Loading sub module "exa"
[ 656.042] (II) LoadModule: "exa"
[ 656.042] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 656.071] (II) Module exa: vendor="X.Org Foundation"
[ 656.071] compiled for 1.14.3, module version = 2.6.0
[ 656.071] ABI class: X.Org Video Driver, version 14.1
[ 656.071] (II) UnloadModule: "vesa"
[ 656.071] (II) Unloading vesa
[ 656.071] (II) UnloadModule: "modesetting"
[ 656.071] (II) Unloading modesetting
[ 656.071] (--) Depth 24 pixmap format is 32 bpp
[ 656.071] (II) Loading sub module "vbe"
[ 656.071] (II) LoadModule: "vbe"
[ 656.072] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 656.082] (II) Module vbe: vendor="X.Org Foundation"
[ 656.082] compiled for 1.14.3, module version = 1.1.0
[ 656.082] ABI class: X.Org Video Driver, version 14.1
[ 656.082] (II) Loading sub module "int10"
[ 656.082] (II) LoadModule: "int10"
[ 656.083] (II) Loading /usr/lib/xorg/modules/libint10.so
[ 656.087] (II) Module int10: vendor="X.Org Foundation"
[ 656.087] compiled for 1.14.3, module version = 1.0.0
[ 656.087] ABI class: X.Org Video Driver, version 14.1
[ 656.087] (II) SIS(0): initializing int10
[ 656.093] (II) SIS(0): Primary V_BIOS segment is: 0xc000
[ 656.128] (II) SIS(0): VESA BIOS detected
[ 656.128] (II) SIS(0): VESA VBE Version 3.0
[ 656.128] (II) SIS(0): VESA VBE Total Mem: 16384 kB
[ 656.128] (II) SIS(0): VESA VBE OEM: SiS
[ 656.128] (II) SIS(0): VESA VBE OEM Software Rev: 1.0
[ 656.128] (II) SIS(0): VESA VBE OEM Vendor: Silicon Integrated Systems Corp.
[ 656.128] (II) SIS(0): VESA VBE OEM Product: 630
[ 656.128] (II) SIS(0): VESA VBE OEM Product Rev: 2.08.b6
[ 656.613] (II) SIS(0): Setting standard mode 0x22
[ 656.774] drmOpenDevice: node name is /dev/dri/card0
[ 656.779] drmOpenDevice: node name is /dev/dri/card0
[ 657.928] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
[ 657.928] drmOpenDevice: node name is /dev/dri/card0
[ 657.928] drmOpenDevice: open result is 14, (OK)
[ 657.928] drmOpenByBusid: drmOpenMinor returns 14
[ 657.928] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
[ 657.929] (II) [drm] loaded kernel module for "sis" driver.
[ 657.929] (II) [drm] DRM interface version 1.4
[ 657.929] (II) [drm] DRM open master succeeded.
[ 657.929] (II) SIS(0): [drm] Using the DRM lock SAREA also for drawables.
[ 657.929] (II) SIS(0): [drm] framebuffer handle = 0xd8000000
[ 657.929] (II) SIS(0): [drm] added 1 reserved context for kernel
[ 657.929] (II) SIS(0): X context handle = 0x1
[ 657.929] (II) SIS(0): [drm] installed DRM signal handler
[ 657.929] (II) SIS(0): [dri] Video RAM memory heap: 0x800000 to 0xf7f000 (7676KB)
[ 657.929] (II) SIS(0): [drm] MMIO registers mapped to 0xd2800000
[ 657.929] (II) SIS(0): [drm] AGP enabled
[ 657.979] (II) SIS(0): [drm] Allocated 8MB AGP memory
[ 657.980] (II) SIS(0): [drm] Bound 8MB AGP memory
[ 657.980] (II) SIS(0): [drm] No valid IRQ number for device 1:0:0 (code -22)
[ 657.980] (II) SIS(0): [dri] Visual configs initialized
[ 658.026] (II) EXA(0): Offscreen pixmap area of 5931008 bytes
[ 658.026] (II) EXA(0): Driver registered support for the following operations:
[ 658.026] (II) Solid
[ 658.026] (II) Copy
[ 658.026] (II) UploadToScreen
[ 658.026] (II) DownloadFromScreen
[ 658.026] (--) SIS(0): CPU frequency 866.00Mhz
[ 658.028] (II) SIS(0): Benchmarking system RAM to video RAM memory transfer methods:
[ 658.047] (--) SIS(0): Checked libc memcpy()... 249.1 MiB/s
[ 658.065] (--) SIS(0): Checked built-in-1 memcpy()... 269.7 MiB/s
[ 658.103] (--) SIS(0): Checked built-in-2 memcpy()... 81.9 MiB/s
[ 658.121] (--) SIS(0): Checked MMX memcpy()... 274.6 MiB/s
[ 658.138] (--) SIS(0): Checked MMX2 memcpy()... 339.6 MiB/s
[ 658.138] (--) SIS(0): Using MMX2 method for aligned data transfers to video RAM
[ 658.138] (--) SIS(0): Using MMX2 method for unaligned data transfers to video RAM
[ 658.139] (--) SIS(0): CPU frequency 866.00Mhz
[ 658.141] (II) SIS(0): Benchmarking video RAM to system RAM memory transfer methods:
[ 658.199] (--) SIS(0): Checked libc memcpy()... 63.7 MiB/s
[ 658.257] (--) SIS(0): Checked built-in-1 memcpy()... 63.7 MiB/s
[ 658.329] (--) SIS(0): Checked built-in-2 memcpy()... 45.5 MiB/s
[ 658.387] (--) SIS(0): Checked MMX memcpy()... 62.5 MiB/s
[ 658.441] (--) SIS(0): Checked MMX2 memcpy()... 68.5 MiB/s
[ 658.442] (--) SIS(0): Using MMX2 method for aligned data transfers from video RAM
[ 658.442] (--) SIS(0): Using MMX2 method for unaligned data transfers from video RAM
[ 658.442] (==) SIS(0): Backing store disabled
[ 658.442] (==) SIS(0): Silken mouse enabled
[ 658.445] (==) SIS(0): DPMS enabled
[ 658.445] (II) SIS(0): Using SiS300/315/330/340 series HW Xv
[ 658.445] (II) SIS(0): [DRI] installation complete
[ 658.445] (II) SIS(0): Direct rendering enabled
[ 658.454] (II) SIS(0): Initialized SISCTRL extension version 0.1
[ 658.454] (II) SIS(0): Registered screen 0 with SISCTRL extension version 0.1
[ 658.454] (==) RandR enabled
[ 658.496] (II) AIGLX: Screen 0 is not DRI2 capable
[ 658.496] drmOpenDevice: node name is /dev/dri/card0
[ 658.496] drmOpenDevice: open result is 15, (OK)
[ 658.496] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
[ 658.497] drmOpenDevice: node name is /dev/dri/card0
[ 658.497] drmOpenDevice: open result is 15, (OK)
[ 658.497] drmOpenByBusid: drmOpenMinor returns 15
[ 658.497] drmOpenByBusid: Interface 1.4 failed, trying 1.1
[ 658.497] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
[ 658.497] (EE) AIGLX error: dlopen of /usr/lib/xorg/modules/dri/sis_dri.so failed (/usr/lib/xorg/modules/dri/sis_dri.so: cannot open shared object file: No such file or directory)
[ 658.497] (EE) AIGLX: reverting to software rendering
[ 658.796] (II) AIGLX: Loaded and initialized swrast
[ 658.796] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 660.429] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 660.430] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 660.430] (**) Power Button: Applying InputClass "keyboard-all"
[ 660.430] (II) LoadModule: "evdev"
[ 660.432] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 660.473] (II) Module evdev: vendor="X.Org Foundation"
[ 660.474] compiled for 1.14.3, module version = 2.8.2
[ 660.474] Module class: X.Org XInput Driver
[ 660.474] ABI class: X.Org XInput driver, version 19.1
[ 660.474] (II) Using input driver 'evdev' for 'Power Button'
[ 660.474] (**) Power Button: always reports core events
[ 660.474] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 660.474] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 660.474] (--) evdev: Power Button: Found keys
[ 660.475] (II) evdev: Power Button: Configuring as keyboard
[ 660.475] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[ 660.475] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 660.475] (**) Option "xkb_rules" "evdev"
[ 660.475] (**) Option "xkb_model" "pc104"
[ 660.475] (**) Option "xkb_layout" "us"
[ 660.475] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 660.672] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 660.672] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 660.672] (**) Power Button: Applying InputClass "keyboard-all"
[ 660.672] (II) Using input driver 'evdev' for 'Power Button'
[ 660.672] (**) Power Button: always reports core events
[ 660.673] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 660.673] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 660.673] (--) evdev: Power Button: Found keys
[ 660.673] (II) evdev: Power Button: Configuring as keyboard
[ 660.673] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3/event3"
[ 660.673] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 660.673] (**) Option "xkb_rules" "evdev"
[ 660.673] (**) Option "xkb_model" "pc104"
[ 660.673] (**) Option "xkb_layout" "us"
[ 660.674] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 660.677] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 660.677] (II) No input driver specified, ignoring this device.
[ 660.677] (II) This device may have been added with another device file.
[ 660.677] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 660.678] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 660.678] setversion 1.4 failed
[ 660.679] (II) config/udev: Adding input device Asus Laptop extra buttons (/dev/input/event5)
[ 660.679] (**) Asus Laptop extra buttons: Applying InputClass "evdev keyboard catchall"
[ 660.680] (**) Asus Laptop extra buttons: Applying InputClass "keyboard-all"
[ 660.680] (II) Using input driver 'evdev' for 'Asus Laptop extra buttons'
[ 660.680] (**) Asus Laptop extra buttons: always reports core events
[ 660.680] (**) evdev: Asus Laptop extra buttons: Device: "/dev/input/event5"
[ 660.680] (--) evdev: Asus Laptop extra buttons: Vendor 0 Product 0
[ 660.680] (--) evdev: Asus Laptop extra buttons: Found keys
[ 660.680] (II) evdev: Asus Laptop extra buttons: Configuring as keyboard
[ 660.680] (**) Option "config_info" "udev:/sys/devices/platform/asus_laptop/input/input5/event5"
[ 660.680] (II) XINPUT: Adding extended input device "Asus Laptop extra buttons" (type: KEYBOARD, id 8)
[ 660.681] (**) Option "xkb_rules" "evdev"
[ 660.681] (**) Option "xkb_model" "pc104"
[ 660.681] (**) Option "xkb_layout" "us"
[ 660.681] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 660.684] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event1)
[ 660.684] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 660.684] (**) AT Translated Set 2 keyboard: Applying InputClass "keyboard-all"
[ 660.684] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 660.685] (**) AT Translated Set 2 keyboard: always reports core events
[ 660.685] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event1"
[ 660.685] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 660.685] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 660.685] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 660.685] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input1/event1"
[ 660.685] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[ 660.685] (**) Option "xkb_rules" "evdev"
[ 660.686] (**) Option "xkb_model" "pc104"
[ 660.686] (**) Option "xkb_layout" "us"
[ 660.686] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 660.689] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event6)
[ 660.689] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall"
[ 660.689] (II) Using input driver 'evdev' for 'TPPS/2 IBM TrackPoint'
[ 660.689] (**) TPPS/2 IBM TrackPoint: always reports core events
[ 660.689] (**) evdev: TPPS/2 IBM TrackPoint: Device: "/dev/input/event6"
[ 660.689] (--) evdev: TPPS/2 IBM TrackPoint: Vendor 0x2 Product 0xa
[ 660.690] (--) evdev: TPPS/2 IBM TrackPoint: Found 3 mouse buttons
[ 660.690] (--) evdev: TPPS/2 IBM TrackPoint: Found relative axes
[ 660.690] (--) evdev: TPPS/2 IBM TrackPoint: Found x and y relative axes
[ 660.690] (II) evdev: TPPS/2 IBM TrackPoint: Configuring as mouse
[ 660.690] (**) evdev: TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
[ 660.690] (**) evdev: TPPS/2 IBM TrackPoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 660.690] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input6/event6"
[ 660.690] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 10)
[ 660.691] (II) evdev: TPPS/2 IBM TrackPoint: initialized for relative axes.
[ 660.692] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
[ 660.692] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0
[ 660.692] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
[ 660.692] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
[ 660.694] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse0)
[ 660.694] (II) No input driver specified, ignoring this device.
[ 660.694] (II) This device may have been added with another device file.
[ 660.697] (II) config/udev: Adding input device Speakup (/dev/input/event0)
[ 660.697] (**) Speakup: Applying InputClass "evdev keyboard catchall"
[ 660.697] (**) Speakup: Applying InputClass "keyboard-all"
[ 660.697] (II) Using input driver 'evdev' for 'Speakup'
[ 660.697] (**) Speakup: always reports core events
[ 660.697] (**) evdev: Speakup: Device: "/dev/input/event0"
[ 660.697] (--) evdev: Speakup: Vendor 0 Product 0
[ 660.698] (--) evdev: Speakup: Found keys
[ 660.698] (II) evdev: Speakup: Configuring as keyboard
[ 660.698] (**) Option "config_info" "udev:/sys/devices/virtual/input/input0/event0"
[ 660.698] (II) XINPUT: Adding extended input device "Speakup" (type: KEYBOARD, id 11)
[ 660.698] (**) Option "xkb_rules" "evdev"
[ 660.698] (**) Option "xkb_model" "pc104"
[ 660.698] (**) Option "xkb_layout" "us"
[ 660.698] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 660.750] removing GPU device /sys/devices/pci0000:00/0000:00:02.0/0000:01:00.0/drm/card0 /dev/dri/card0
[ 660.750] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 660.750] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 660.751] setversion 1.4 failed
[ 661.936] (EE)
[ 661.937] (EE) Backtrace:
[ 661.937] (EE) 0: /usr/bin/X (xorg_backtrace+0x49) [0x81d6099]
[ 661.942] (EE) 1: /usr/bin/X (0x8048000+0x191ac4) [0x81d9ac4]
[ 661.942] (EE) 2: linux-gate.so.1 (__kernel_rt_sigreturn+0x0) [0xffffe410]
[ 661.942] (EE) 3: /usr/lib/xorg/modules/drivers/sis_drv.so (0xb71ae000+0x4ddbc) [0xb71fbdbc]
[ 661.943] (EE) 4: /usr/lib/xorg/modules/drivers/sis_drv.so (0xb71ae000+0x3a5f9) [0xb71e85f9]
[ 661.943] (EE) 5: /usr/lib/xorg/modules/drivers/sis_drv.so (0xb71ae000+0x28b3d) [0xb71d6b3d]
[ 661.943] (EE) 6: /usr/lib/xorg/modules/libexa.so (0xb7162000+0x5316) [0xb7167316]
[ 661.943] (EE) 7: /usr/lib/xorg/modules/libexa.so (0xb7162000+0x57f6) [0xb71677f6]
[ 661.943] (EE) 8: /usr/lib/xorg/modules/libexa.so (0xb7162000+0x58bf) [0xb71678bf]
[ 661.950] (EE) 9: /usr/lib/xorg/modules/libexa.so (0xb7162000+0x61e2) [0xb71681e2]
[ 661.950] (EE) 10: /usr/lib/xorg/modules/libexa.so (0xb7162000+0x3f8f) [0xb7165f8f]
[ 661.950] (EE) 11: /usr/lib/xorg/modules/libexa.so (0xb7162000+0xa028) [0xb716c028]
[ 661.950] (EE) 12: /usr/lib/xorg/modules/libexa.so (0xb7162000+0xab68) [0xb716cb68]
[ 661.951] (EE) 13: /usr/bin/X (miPaintWindow+0x208) [0x81b6e08]
[ 661.951] (EE) 14: /usr/bin/X (miHandleValidateExposures+0x55) [0x81ce055]
[ 661.951] (EE) 15: /usr/bin/X (MapWindow+0x175) [0x80a7a55]
[ 661.956] (EE) 16: /usr/bin/X (0x8048000+0x2b9e5) [0x80739e5]
[ 661.956] (EE) 17: /usr/bin/X (0x8048000+0x3151d) [0x807951d]
[ 661.957] (EE) 18: /usr/bin/X (0x8048000+0x1f69a) [0x806769a]
[ 661.957] (EE) 19: /lib/libc.so.6 (__libc_start_main+0xf3) [0xb73207a3]
[ 661.957] (EE) 20: /usr/bin/X (0x8048000+0x1fa69) [0x8067a69]
[ 661.957] (EE)
[ 661.960] (EE) Segmentation fault at address 0x0
[ 661.960] (EE)
Fatal server error:
[ 661.960] (EE) Caught signal 11 (Segmentation fault). Server aborting
[ 661.960] (EE)
[ 661.960] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 661.961] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 661.961] (EE)
[ 661.977] (II) SIS(0): Restoring by setting old mode 0x03
[ 662.835] (EE) Server terminated with error (1). Closing log file.
[/CODE]
I also looked up /var/log/Xorg.0.log but that was exactly the same with the above errors

gonny95 03-02-2014 08:41 AM
When I tied lspci
Code:
00:00.0 Host bridge: Silicon Integrated Systems [SiS] 630 Host (rev 31)
00:00.1 IDE interface: Silicon Integrated Systems [SiS] 5513 IDE Controller (rev d0)
00:01.0 ISA bridge: Silicon Integrated Systems [SiS] SiS85C503/5513 (LPC Bridge)
00:01.1 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet (rev 82)
00:01.4 Multimedia audio controller: Silicon Integrated Systems [SiS] SiS PCI Audio Accelerator (rev 02)
00:01.6 Modem: Silicon Integrated Systems [SiS] AC'97 Modem Controller (rev a0)
00:02.0 PCI bridge: Silicon Integrated Systems [SiS] AGP Port (virtual PCI-to-PCI bridge)
00:09.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 88)
00:09.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 88)
00:09.2 System peripheral: Ricoh Co Ltd R5C576 SD Bus Host Adapter
00:0a.0 FireWire (IEEE 1394): Texas Instruments TSB43AB21 IEEE-1394a-2000 Controller (PHY/Link)
00:0f.0 USB controller: NEC Corporation OHCI USB Controller (rev 41)
00:0f.1 USB controller: NEC Corporation OHCI USB Controller (rev 41)
00:0f.2 USB controller: NEC Corporation uPD72010x USB 2.0 Controller (rev 02)
01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 630/730 PCI/AGP VGA Display Adapter (rev 31)
It seems that the last one is the video card


When I tried lsmod
Code:
Module                  Size  Used by
usb_storage            35805  2
ipv6                  234918  10
cpufreq_ondemand        6807  1
speedstep_lib          2495  0
lp                      7474  0
ppdev                  4702  0
parport_pc            16472  0
parport                24879  3 lp,ppdev,parport_pc
fuse                  64207  1
snd_trident            27723  0
snd_util_mem            1727  1 snd_trident
snd_mpu401_uart        4511  1 snd_trident
snd_rawmidi            14349  1 snd_mpu401_uart
snd_seq_device          4204  1 snd_rawmidi
snd_ac97_codec        89415  1 snd_trident
snd_pcm                60504  2 snd_ac97_codec,snd_trident
psmouse                73088  0
snd_page_alloc          5894  2 snd_pcm,snd_trident
acpi_cpufreq            4479  0
mperf                    911  1 acpi_cpufreq
processor              20557  1 acpi_cpufreq
fan                    1957  0
thermal                7128  0
sis900                18219  0
thermal_sys            18829  3 fan,thermal,processor
snd_timer              14195  1 snd_pcm
freq_table              2104  3 cpufreq_ondemand,acpi_cpufreq,thermal_sys
shpchp                21889  0
serio_raw              3441  0
hwmon                    997  1 thermal_sys
mii                    3263  1 sis900
pcmcia                30357  0
snd                    43944  7 snd_ac97_codec,snd_timer,snd_pcm,snd_rawmidi,snd_mpu401_uart,snd_seq_device,snd_trident
soundcore              4218  1 snd
ac97_bus                826  1 snd_ac97_codec
gameport                5824  2 snd_trident
firewire_ohci          27363  0
firewire_core          43220  1 firewire_ohci
ohci_hcd              20244  0
ehci_pci                2972  0
ehci_hcd              33259  1 ehci_pci
battery                9551  0
yenta_socket          18759  0
i2c_sis630              3952  0
asus_laptop            16569  0
i2c_core              17440  1 i2c_sis630
pcmcia_rsrc            8632  1 yenta_socket
sis_agp                3445  1
pcmcia_core            10112  3 pcmcia,pcmcia_rsrc,yenta_socket
agpgart                21576  1 sis_agp
sparse_keymap          2534  1 asus_laptop
rfkill                12408  1 asus_laptop
input_polldev          2126  1 asus_laptop
ac                      3395  0
evdev                  7448  0
button                  3664  0
microcode              7469  0
loop                  14679  0
I think sis900 is kernel module for my video card but I'm not sure

allend 03-03-2014 07:41 AM
Quote:
01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 630/730 PCI/AGP VGA Display Adapter (rev 31)
That device is supported by the sis Xorg driver. Do 'man sis' for further details.

I would try setting up a /etc/X11/xorg.conf file. This Arch wiki article will help. https://wiki.archlinux.org/index.php/Xf86-video-sis

gonny95 03-03-2014 09:03 AM
Thanks allend that's exactly what I did:

http://www.linuxquestions.org/questi...er-4175496398/


All times are GMT -5. The time now is 11:43 PM.