unable to access site
 

HI

I have centos 5.3 is installed with squid proxy and iptables firewall, internet sharing is through squid , on squid server i able to ping and access our
mail hosting server mail.xxxx.com but from client pc we are unable to ping and access the aboute server

Regards
Amar

Hello amartlk,

please provide more information. Did you ping the IP-adress or the DNS-name of the computer?

If you've pinged the DNS-name, please try to ping the IP-adress and tell us if this works.

If you can't even ping the IP-adress, please tell us more about your network, a short draft would be useful.

Markus

hi

i have 2 lancard eth0 and eth1 in proxy server in centos eth0 connected to local lan and eth1 connected to broadband connection of internet , we have iptables rules has forward internet traffic from eth0 to eth1 , but recently we configure new broadband connection , here we configure adsl modem in centos , we keep modem in dialup mode and keep eth1 lancard in automatically assign mode , i configure internet but due to dial up the isp static ip assign is not assgin to eth1 it created ppoe connection where the isp ip is assigned , but in my iptable we have rule to transfer traffic from eth0 to eth1 but how i make rule to transfer traffic from etho to ppoe (virtual lan) created by dial up internet


Amar

Hi,

I found this (they say homerouter, but it is similar to your network) http://www.gentoo.org/doc/en/home-router-howto.xml and http://www.stanford.edu/~fenn/linux/

Another point, I think that you question is more related to "Network" than to "Linux-newbie", I'd recommend that you use the report-Button at one of your posts and ask a Moderator to move this thread to the "Networking"-Forum here: http://www.linuxquestions.org/questi...-networking-3/

Hopfully this will help you.

Markus

hi

I refer links , but unable to find solution , when i connected adsl modem then ip is assigned to ppp0 not to eth1 (lan card where isp link is connected),as i have ip fowading enable where internet traffic is from local lan (eth0) is forwaded to eth1 same rule is also added in iptables.we are able to access internet but some site are not opening and we are unable to ping any site like google etc, i have centos 5.3 installed

hi
send me your network configuration and port setting in squid.conf also details acl about your network

hi
pls find



[root@venus ~]# ifconfig
eth0 Link encap:Ethernet HWaddr 00:14:85:96:1C:A7
inet addr:172.16.1.24 Bcast:172.16.255.255 Mask:255.255.0.0
inet6 addr: fe80::214:85ff:fe96:1ca7/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:736487 errors:0 dropped:0 overruns:0 frame:0
TX packets:859918 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:122617961 (116.9 MiB) TX bytes:772581200 (736.7 MiB)
Interrupt:185 Base address:0x6000

eth1 Link encap:Ethernet HWaddr 00:08:A1:7B:A0:F9
inet addr:192.168.1.2 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::208:a1ff:fe7b:a0f9/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:658246 errors:0 dropped:0 overruns:0 frame:0
TX packets:620456 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:728744445 (694.9 MiB) TX bytes:100768525 (96.1 MiB)
Interrupt:193 Base address:0x4000

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:21198 errors:0 dropped:0 overruns:0 frame:0
TX packets:21198 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:5867015 (5.5 MiB) TX bytes:5867015 (5.5 MiB)

ppp0 Link encap:Point-to-Point Protocol
inet addr:59.99.238.85 P-t-P:59.99.238.1 Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1460 Metric:1
RX packets:793 errors:0 dropped:0 overruns:0 frame:0
TX packets:968 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:3
RX bytes:528818 (516.4 KiB) TX bytes:148274 (144.7 KiB)


[root@venus ~]# route
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
59.99.238.1 * 255.255.255.255 UH 0 0 0 ppp0
192.168.1.0 * 255.255.255.0 U 0 0 0 eth1
169.254.0.0 * 255.255.0.0 U 0 0 0 eth1
172.16.0.0 * 255.255.0.0 U 0 0 0 eth0
default * 0.0.0.0 U 0 0 0 ppp0

HI

Anyone please provide solution


Amar