Hey guys!
my Lucid lynx doesn't mount
my mp3 player,its already
setup in USB-MODE as MSC , but it doesn't
show it in desktop, or media folder,
or mnt folder or under file system!!

my usb is detected

this is my lsusb output:
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 046d:c018 Logitech, Inc. Optical Wheel Mouse
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 004: ID 0781:74d1 SanDisk Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

my dmesg output:

[ 33.343314] agpgart-via 0000:00:00.0: AGP 3.5 bridge
[ 33.343336] agpgart-via 0000:00:00.0: putting AGP V3 device into 8x mode
[ 33.343407] nvidia 0000:01:00.0: putting AGP V3 device into 8x mode
[ 43.544011] eth0: no IPv6 routers present
[ 49.712263] end_request: I/O error, dev fd0, sector 0
[ 61.868551] end_request: I/O error, dev fd0, sector 0
[ 3548.176351] hub 1-0:1.0: unable to enumerate USB device on port 5
[ 3550.812034] usb 1-5: new high speed USB device using ehci_hcd and address 4
[ 3555.944083] usb 1-5: unable to read config index 0 descriptor/start: -110
[ 3555.944090] usb 1-5: chopping to 0 config(s)
[ 3565.944283] usb 1-5: string descriptor 0 read error: -110
[ 3565.944451] usb 1-5: no configuration chosen from 0 choices


my mpt-tool output: (when setup in MPT mode)

mtp-detect
libmtp version: 1.0.2

Listing raw device(s)
Device 0 (VID=0781 and PID=74d0) is a SanDisk Sansa Clip+.
Found 1 device(s):
SanDisk: Sansa Clip+ (0781:74d0) @ bus 1, dev 17
Attempting to connect device(s)
LIBMTP PANIC: Unable to find interface & endpoints of device
Unable to open raw device 0
OK.


please I need help!!!

try mounting manualy

Hey, were you able to solve this issue? I just purchased a Sansa Clip and I connected it to my pc... The music player recognizes it but I can't mount it on my desktop. I would like to just cp the music to the device instead of using the music player.
Thanks

ceantuco,

The Clip has two modes, MTP and MSC (mass storage class). If you just want to copy files to the device like a regular USB flash drive you need to change to MSC mode.

1 members found this post helpful.

Thank you so much!