LinuxQuestions.org
Visit Jeremy's Blog.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Newbie
User Name
Password
Linux - Newbie This Linux forum is for members that are new to Linux.
Just starting out and have a question? If it is not in the man pages or the how-to's this is the place!

Notices


Reply
  Search this Thread
Old 07-16-2004, 01:20 PM   #1
coyote399
Member
 
Registered: Feb 2004
Distribution: Debian Sarge
Posts: 30

Rep: Reputation: 15
Trouble starting gnome on new FC2 installation


I recently installed the x86_64 version of FC2 on my system. I cannot log in as a regular user in graphical mode. Below are some logs that seem to be relevant. The problem may have arisen from mounting an existing partition (that I used when I was using debian) as /home. Using chmod 777 on /home/jth did not fix the problem.

EDIT:
http://www.linuxquestions.org/questi...hreadid=203862
this guy suggested chmod 777 /tmp, but it didn't fix it either.

Jul 16 12:02:40 starship gconfd (jth-2952): starting (version 2.6.0), pid 2952 user 'jth'
Jul 16 12:02:40 starship gconfd (jth-2952): Failed to load source "xml:readwrite:/home/jth/.gconf": Couldn't resolve address for configuration source: Can't read from or write to the XML root directory in the address "xml:readwrite:/home/jth/.gconf"
Jul 16 12:02:40 starship gconfd (jth-2952): Resolved address "xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only config source at position 0
Jul 16 12:02:40 starship gconfd (jth-2952): Resolved address "xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only config source at position 1
Jul 16 12:02:40 starship gconfd (jth-2952): None of the resolved addresses are writable; saving configuration settings will not be possible
Jul 16 12:02:40 starship gconfd (jth-2952): No writable config sources successfully resolved, may not be able to save some configuration changes
Jul 16 12:02:40 starship gconfd (jth-2952): Unable to open saved state file '/home/jth/.gconfd/saved_state': Permission denied
Jul 16 12:02:40 starship gconfd (jth-2952): Failed to open saved state file: Failed: Failed to open gconfd logfile; won't be able to restore listeners after gconfd shutdown (Permission denied)
Jul 16 12:02:40 starship gconfd (jth-2952): Failed to open saved state file: Failed: Failed to open gconfd logfile; won't be able to restore listeners after gconfd shutdown (Permission denied)

I am posting this logged on as root in graphical mode ( ). Nautilus will not work. I get an error saying "The Application "nautilus" has quit unexpectedly. You can inform the developers of what happened to help them fix it. Or you can restart the application right now." The only relevant logs I can find are below.

Jul 16 11:42:36 starship kernel: nautilus[3085]: segfault at 00000004fffffff8 rip 0000002a99344dd1 rsp 0000007fbfffed70 error 4
Jul 16 11:42:41 starship kernel: nautilus[3136]: segfault at 00000004fffffff8 rip 0000002a99344dd1 rsp 0000007fbfffedb0 error 4
Jul 16 11:44:55 starship kernel: nautilus[3197]: segfault at 00000004fffffff8 rip 0000002a99344dd1 rsp 0000007fbfffed90 error 4
Jul 16 11:45:01 starship kernel: nautilus[3224]: segfault at 00000004fffffff8 rip 0000002a99344dd1 rsp 0000007fbfffedb0 error 4
Jul 16 11:45:18 starship kernel: nautilus[3252]: segfault at 00000004fffffff8 rip 0000002a99344dd1 rsp 0000007fbfffed60 error 4
Jul 16 11:45:53 starship kernel: nautilus[3299]: segfault at 00000004fffffff8 rip 0000002a99344dd1 rsp 0000007fbfffeb90 error 4
Jul 16 12:00:47 starship kernel: nautilus[2815]: segfault at 00000004fffffff8 rip 0000002a99344dd1 rsp 0000007fbfffed50 error 4
Jul 16 12:03:20 starship kernel: nautilus[3071]: segfault at 00000004fffffff8 rip 0000002a99344dd1 rsp 0000007fbfffed70 error 4

I would REALLY appreciate any help you guys could give me. If you need more info, I will be checking this thread regularly and will try to help you help me.

Last edited by coyote399; 07-16-2004 at 01:43 PM.
 
Old 07-16-2004, 04:19 PM   #2
coyote399
Member
 
Registered: Feb 2004
Distribution: Debian Sarge
Posts: 30

Original Poster
Rep: Reputation: 15
After spending more time researching my problems, I found some bug reports that describe my exact problem with nautilus.

http://bugs.gentoo.org/show_bug.cgi?id=46674
https://bugzilla.redhat.com/bugzilla....cgi?id=122087

Later, when I boot back into Fedora, I am going to try to get the very latest version or orbit2, which should fix it.

http://bugzilla.gnome.org/show_bug.cgi?id=138986


I still need some help with my first problem though. (can't be logged in as root all the time )

Last edited by coyote399; 07-16-2004 at 04:43 PM.
 
Old 07-16-2004, 05:23 PM   #3
coyote399
Member
 
Registered: Feb 2004
Distribution: Debian Sarge
Posts: 30

Original Poster
Rep: Reputation: 15
I am having a little trouble installing ORBit2-2.10.3


why can't my C compiler create executables? Is there an easier way to do this? (I couldn't find a binary .rpm)

[root@starship ORBit2-2.10.3]# ./configure
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for gcc... gcc
checking for C compiler default output file name... configure: error: C compiler cannot create executables
See `config.log' for more details.
[root@starship ORBit2-2.10.3]# cat config.log
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.

It was created by configure, which was
generated by GNU Autoconf 2.59. Invocation command line was

$ ./configure

## --------- ##
## Platform. ##
## --------- ##

hostname = starship.starfleet
uname -m = x86_64
uname -r = 2.6.6-1.435.2.3
uname -s = Linux
uname -v = #1 Thu Jul 1 08:25:28 EDT 2004

/usr/bin/uname -p = unknown
/bin/uname -X = unknown

/bin/arch = x86_64
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown

PATH: /usr/kerberos/sbin
PATH: /usr/kerberos/bin
PATH: /usr/local/sbin
PATH: /usr/local/bin
PATH: /sbin
PATH: /bin
PATH: /usr/sbin
PATH: /usr/bin
PATH: /usr/X11R6/bin
PATH: /root/bin


## ----------- ##
## Core tests. ##
## ----------- ##

configure:1582: checking for a BSD-compatible install
configure:1637: result: /usr/bin/install -c
configure:1648: checking whether build environment is sane
configure:1691: result: yes
configure:1724: checking for gawk
configure:1740: found /bin/gawk
configure:1750: result: gawk
configure:1760: checking whether make sets $(MAKE)
configure:1780: result: yes
configure:1963: checking for gcc
configure:1979: found /usr/bin/gcc
configure:1989: result: gcc
configure:2233: checking for C compiler version
configure:2236: gcc --version </dev/null >&5
gcc (GCC) 3.3.3 20040412 (Red Hat Linux 3.3.3-7)
Copyright (C) 2003 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

configure:2239: $? = 0
configure:2241: gcc -v </dev/null >&5
Reading specs from /usr/lib/gcc-lib/x86_64-redhat-linux/3.3.3/specs
Configured with: ../configure --prefix=/usr --mandir=/usr/share/man --infodir=/usr/share/info --enable-shared --enable-threads=posix --disable-checking --disable-libunwind-exceptions --with-system-zlib --enable-__cxa_atexit --host=x86_64-redhat-linux
Thread model: posix
gcc version 3.3.3 20040412 (Red Hat Linux 3.3.3-7)
configure:2244: $? = 0
configure:2246: gcc -V </dev/null >&5
gcc: `-V' option must have argument
configure:2249: $? = 1
configure:2272: checking for C compiler default output file name
configure:2275: gcc conftest.c >&5
/usr/bin/ld: crt1.o: No such file: No such file or directory
collect2: ld returned 1 exit status
configure:2278: $? = 1
configure: failed program was:
| /* confdefs.h. */
|
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| /* end confdefs.h. */
|
| int
| main ()
| {
|
| ;
| return 0;
| }
configure:2317: error: C compiler cannot create executables
See `config.log' for more details.

## ---------------- ##
## Cache variables. ##
## ---------------- ##

ac_cv_env_CC_set=
ac_cv_env_CC_value=
ac_cv_env_CFLAGS_set=
ac_cv_env_CFLAGS_value=
ac_cv_env_CPPFLAGS_set=
ac_cv_env_CPPFLAGS_value=
ac_cv_env_CPP_set=
ac_cv_env_CPP_value=
ac_cv_env_CXXCPP_set=
ac_cv_env_CXXCPP_value=
ac_cv_env_CXXFLAGS_set=
ac_cv_env_CXXFLAGS_value=
ac_cv_env_CXX_set=
ac_cv_env_CXX_value=
ac_cv_env_F77_set=
ac_cv_env_F77_value=
ac_cv_env_FFLAGS_set=
ac_cv_env_FFLAGS_value=
ac_cv_env_LDFLAGS_set=
ac_cv_env_LDFLAGS_value=
ac_cv_env_build_alias_set=
ac_cv_env_build_alias_value=
ac_cv_env_host_alias_set=
ac_cv_env_host_alias_value=
ac_cv_env_target_alias_set=
ac_cv_env_target_alias_value=
ac_cv_path_install='/usr/bin/install -c'
ac_cv_prog_AWK=gawk
ac_cv_prog_ac_ct_CC=gcc
ac_cv_prog_make_make_set=yes

## ----------------- ##
## Output variables. ##
## ----------------- ##

ACLOCAL='${SHELL} /root/ORBit2-2.10.3/missing --run aclocal-1.6'
AMDEPBACKSLASH=''
AMDEP_FALSE=''
AMDEP_TRUE=''
AMTAR='${SHELL} /root/ORBit2-2.10.3/missing --run tar'
AR=''
AS=''
AUTOCONF='${SHELL} /root/ORBit2-2.10.3/missing --run autoconf'
AUTOHEADER='${SHELL} /root/ORBit2-2.10.3/missing --run autoheader'
AUTOMAKE='${SHELL} /root/ORBit2-2.10.3/missing --run automake-1.6'
AWK='gawk'
CC='gcc'
CCDEPMODE=''
CFLAGS=''
CPP=''
CPPFLAGS=''
CXX=''
CXXCPP=''
CXXDEPMODE=''
CXXFLAGS=''
DEFS=''
DEPDIR=''
DISABLE_DEPRECATED_CFLAGS=''
DLLTOOL=''
ECHO='echo'
ECHO_C=''
ECHO_N='-n'
ECHO_T=''
EGREP=''
ENABLE_GTK_DOC_FALSE=''
ENABLE_GTK_DOC_TRUE=''
ENABLE_HTTP_FALSE=''
ENABLE_HTTP_TRUE=''
EXEEXT=''
F77=''
FFLAGS=''
GLIB_REQUIRED=''
GTK_DOC_USE_LIBTOOL_FALSE=''
GTK_DOC_USE_LIBTOOL_TRUE=''
HAVE_ORBIT_SSL_SUPPORT=''
HTML_DIR=''
INSTALL_DATA='${INSTALL} -m 644'
INSTALL_PROGRAM='${INSTALL}'
INSTALL_SCRIPT='${INSTALL}'
INSTALL_STRIP_PROGRAM='${SHELL} $(install_sh) -c -s'
LDFLAGS=''
LIBIDL_REQUIRED=''
LIBOBJS=''
LIBS=''
LIBTOOL=''
LINC_CFLAGS=''
LINC_LIBS=''
LINC_SSL_SUPPORT=''
LN_S=''
LOCAL_LINC_CFLAGS=''
LOCAL_LINC_LIBS=''
LTLIBOBJS=''
LT_VERSION='0:0:0'
MAINT=''
MAINTAINER_MODE_FALSE=''
MAINTAINER_MODE_TRUE=''
MAKEINFO='${SHELL} /root/ORBit2-2.10.3/missing --run makeinfo'
OBJDUMP=''
OBJEXT=''
ORBIT_ALIGNOF_CORBA_BOOLEAN=''
ORBIT_ALIGNOF_CORBA_CHAR=''
ORBIT_ALIGNOF_CORBA_DOUBLE=''
ORBIT_ALIGNOF_CORBA_FLOAT=''
ORBIT_ALIGNOF_CORBA_LONG=''
ORBIT_ALIGNOF_CORBA_LONG_DOUBLE=''
ORBIT_ALIGNOF_CORBA_LONG_LONG=''
ORBIT_ALIGNOF_CORBA_OCTET=''
ORBIT_ALIGNOF_CORBA_POINTER=''
ORBIT_ALIGNOF_CORBA_SHORT=''
ORBIT_ALIGNOF_CORBA_STRUCT=''
ORBIT_ALIGNOF_CORBA_WCHAR=''
ORBIT_CFLAGS=''
ORBIT_DEBUG_CFLAGS=''
ORBIT_IDL_CFLAGS=''
ORBIT_IDL_LIBS=''
ORBIT_LIBS=''
ORBIT_MAJOR_VERSION='2'
ORBIT_MICRO_VERSION='3'
ORBIT_MINOR_VERSION='10'
ORBIT_NAME_CFLAGS=''
ORBIT_NAME_LIBS=''
ORBIT_SERIAL='20'
ORBIT_VERSION='2.10.3'
PACKAGE='ORBit2'
PACKAGE_BUGREPORT=''
PACKAGE_NAME=''
PACKAGE_STRING=''
PACKAGE_TARNAME=''
PACKAGE_VERSION=''
PATH_SEPARATOR=':'
PKG_CONFIG=''
POPT_LIBS=''
RANLIB=''
SET_MAKE=''
SHELL='/bin/sh'
SSL_CFLAGS=''
SSL_LIBS=''
STRIP=''
VERSION='2.10.3'
WARN_CFLAGS=''
ac_ct_AR=''
ac_ct_AS=''
ac_ct_CC='gcc'
ac_ct_CXX=''
ac_ct_DLLTOOL=''
ac_ct_F77=''
ac_ct_OBJDUMP=''
ac_ct_RANLIB=''
ac_ct_STRIP=''
am__include=''
am__quote=''
bindir='${exec_prefix}/bin'
build=''
build_alias=''
build_cpu=''
build_os=''
build_vendor=''
datadir='${prefix}/share'
exec_prefix='NONE'
host=''
host_alias=''
host_cpu=''
host_os=''
host_vendor=''
includedir='${prefix}/include'
infodir='${prefix}/info'
install_sh='/root/ORBit2-2.10.3/install-sh'
libdir='${exec_prefix}/lib'
libexecdir='${exec_prefix}/libexec'
localstatedir='${prefix}/var'
mandir='${prefix}/man'
oldincludedir='/usr/include'
pkglibdir=''
prefix='NONE'
program_transform_name='s,x,x,'
sbindir='${exec_prefix}/sbin'
sharedstatedir='${prefix}/com'
sysconfdir='${prefix}/etc'
target_alias=''

## ----------- ##
## confdefs.h. ##
## ----------- ##

#define PACKAGE_BUGREPORT ""
#define PACKAGE_NAME ""
#define PACKAGE_STRING ""
#define PACKAGE_TARNAME ""
#define PACKAGE_VERSION ""

configure: exit 77
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



Similar Threads
Thread Thread Starter Forum Replies Last Post
Gnome panel keeps crashing when starting gnome-session elluva Linux - Software 3 01-24-2006 05:26 PM
FC2. Trouble during installation. mufy Fedora 4 01-05-2005 01:09 AM
Trouble with Wine in FC2...need help! gulo Fedora 3 07-01-2004 08:51 PM
CPU speed error when starting up FC2 Alf829 Fedora 8 03-14-2004 12:26 PM
Gnome 2.4 installation trouble Eeg Linux - Newbie 6 09-26-2003 10:00 AM

LinuxQuestions.org > Forums > Linux Forums > Linux - Newbie

All times are GMT -5. The time now is 12:03 AM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration