temperature
hi altogether !
i'm using ubuntu (lucid linux) and got severe temperature problems. if i am, supposedly, editing a file, the system stops me, and wants me to stop editing ... until it shuts down. i have downloaded the xsensors-application and this gives me core-temperatures of up to 60 degrees ! well, i live in the netherlands and i would like to know how i can let the machine know that i am fine with temperatures, say, ut to 75 degrees ? thank you very much steiney |
It would be helpful if you would say us what system you are actually running. Is it a desktop or a laptop? Which CPU?
In general, just ignoring a suddenly higher CPU temperature is never a good idea, it would be better to find the cause for that and correct it. |
This depends. If it's your OS which is shutting down the machine, then you probably have to configure whatever daemon is watching over your temperatures. Can't be more concrete since I've never used any *buntu system for more than five minutes. Probably someone else can give more concrete help with that.
If it's your BIOS which is shutting down the mainboard then you should look into your BIOS setup, the limits can usually be changed there. |
Try live ubuntu or other distros to see whether it occurs again.
|
i have looked on the ubuntu-pages,
there is one guy who has the same problem (shutdown at far too low temp.) but no solution. |
It still may help to answer the questions we have asked you to get help.
|
My laptop commonly runs at about 120-125 Fahrenheits (about 49-53 Celsiuses). If you are talking 60 degrees C, that's definitely on the high side.
Dust build-up is the most likely cause for overheating, other than hardware (fan) failure. The first and easiest thing to do is to make sure the vents in your computer are clean, both for the power supply and the CPU. If it's a laptop, don't use it on a soft surface, such as a sofa or a bed or a lap, for example, if it has any vents on the bottom. If it's a desktop, take the case off and look for dust. Remove any dust present (disconnect power and allow time for the capacitors to discharge first). Also check that the cooling fans are working in either case. |
I see that you have rated my post as helpful, marked this thread as solved, but not came up with what your actually solution was. Please post your solution here, so that other members can benefit from it.
|
sorry, tobiSGD !
i followed the way frankbell told : i am running a last SUN-representative, a very late AMD-machine with the opteron-processor, a desktop. i removed every dustparticle i could, and the core-temperature is around ~ 51 degrees. thanks for the advice, frank ! steiney |
All times are GMT -5. The time now is 01:55 AM. |