LinuxQuestions.org
Help answer threads with 0 replies.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Newbie
User Name
Password
Linux - Newbie This Linux forum is for members that are new to Linux.
Just starting out and have a question? If it is not in the man pages or the how-to's this is the place!

Notices


Reply
  Search this Thread
Old 01-11-2003, 05:03 PM   #1
snocked
Member
 
Registered: Dec 2002
Location: St. Louis, MO
Distribution: Slackware 9.1
Posts: 482

Rep: Reputation: 30
Take a quick look at my dmesg


What is with all the I/O errors and read capacity errors about 3/4 way through?

snocked@linux:~> dmesg
ter
VP_IDE: VIA vt8233a (rev 00) IDE UDMA133 controller on pci00:11.1
ide0: BM-DMA at 0xb400-0xb407, BIOS settings: hdaMA, hdbio
ide1: BM-DMA at 0xb408-0xb40f, BIOS settings: hdcMA, hddMA
keyboard: Timeout - AT keyboard not present?(ed)
keyboard: Timeout - AT keyboard not present?(f4)
hda: WDC WD1200JB-00CRA1, ATA DISK drive
hdc: LITE-ON LTR-40125S, ATAPI CD/DVD-ROM drive
hdd: LITEON DVD-ROM LTD163, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
blk: queue c039c904, I/O limit 4095Mb (mask 0xffffffff)
hda: safely enabled flush
hda: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=14593/255/63, UDMA(100)
ide-floppy driver 0.99.newide
Partition check:
hda: hda1 hda2
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
loop: loaded (max 16 devices)
Cronyx Ltd, Synchronous PPP and CISCO HDLC (c) 1994
Linux port (c) 1998 Building Number Three Ltd & Jan "Yenya" Kasprzak.
ide-floppy driver 0.99.newide
SCSI subsystem driver Revision: 1.00
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 232k freed
VFS: Mounted root (ext2 filesystem).
hdc: no flushcache support
hdd: no flushcache support
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: LITE-ON Model: LTR-40125S Rev: ZS0J
Type: CD-ROM ANSI SCSI revision: 02
Vendor: LITEON Model: DVD-ROM LTD163 Rev: GH5E
Type: CD-ROM ANSI SCSI revision: 02
sd_attach()
sd_attach()
reiserfs: found format "3.6" with standard journal
reiserfs: checking transaction log (ide0(3,2)) for (ide0(3,2))
reiserfs: using ordered data mode
Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Trying to move old root to /initrd ... failed
Unmounting old root
Trying to free ramdisk memory ... okay
Freeing unused kernel memory: 164k freed
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
LVM version 1.0.5(mp-v6)(15/07/2002) module loaded
Adding Swap: 1052216k swap-space (priority 42)
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack (8191 buckets, 65528 max)
8139too Fast Ethernet driver 0.9.26
eth0: RealTek RTL8139 Fast Ethernet at 0xf894d000, 00:50:8d:a6:1f:14, IRQ 11
eth0: Identified 8139 chip type 'RTL-8139C'
eth0: Setting 100mbps full-duplex based on auto-negotiated partner ability 45e1.
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
hcd.c: ehci-hcd @ 00:10.2, PCI device 1106:3104
hcd.c: irq 10, pci mem f8976000
usb.c: new USB bus registered, assigned bus number 1
ehci-hcd.c: USB 2.0 support enabled, EHCI rev 0.95
hub.c: USB hub found
hub.c: 4 ports detected
usb-uhci.c: $Revision: 1.275 $ time 13:56:25 Sep 13 2002
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: USB UHCI at I/O 0xac00, IRQ 3
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: USB UHCI at I/O 0xb000, IRQ 7
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 3
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: USB UHCI at I/O 0xb800, IRQ 3
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 4
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: USB UHCI at I/O 0xbc00, IRQ 3
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 5
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
uhci.c: USB Universal Host Controller Interface driver v1.1
hub.c: USB new device connect on bus4/1, assigned device number 2
usb.c: USB device 2 (vend/prod 0x46d/0xc308) is not claimed by any active driver.
hub.c: USB new device connect on bus4/2, assigned device number 3
usb.c: USB device 3 (vend/prod 0x46d/0xc00c) is not claimed by any active driver.
hub.c: USB new device connect on bus5/1, assigned device number 2
hub.c: USB hub found
hub.c: 4 ports detected
hub.c: USB new device connect on bus5/1/2, assigned device number 3
usb.c: USB device 3 (vend/prod 0x59b/0x31) is not claimed by any active driver.
sg: find_free_slot ...<7>sg: initializing sg_major_array ...<4>sg: allocated major 21
sg: ... found 15:00
sg_attach: dev0=(21:0)
sg: find_free_slot ...<7>sg: ... found 15:01
sg_attach: dev1=(21:1)
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
Attached scsi CD-ROM sr1 at scsi0, channel 0, id 1, lun 0
sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.12
sr1: scsi3-mmc drive: 0x/48x cd/rw xa/form2 cdda tray
usb.c: registered new driver hiddev
usb.c: registered new driver hid
input0: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb4:2.0
input1: USB HID v1.10 Pointer [Logitech Logitech USB Keyboard] on usb4:2.1
input2: USB HID v1.10 Mouse [Logitech USB Mouse] on usb4:3.0
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
usb-uhci.c: interrupt, status 2, frame# 52
usb_control/bulk_msg: timeout
scsi1 : SCSI emulation for USB Mass Storage devices
Vendor: IOMEGA Model: ZIP 100 Rev: 11.V
Type: Direct-Access ANSI SCSI revision: 02
sd_init()
sd: allocated major 8
sg: find_free_slot ...<7>sg: ... found 15:02
sg_attach: dev2=(21:2)
sd_attach()
sd: find_free_slot ...<7>sd: ... found 08:00
Attached scsi removable disk sda at scsi1, channel 0, id 0, lun 0
sd_finish()
sd_init_onedisk (0,0), sda 08:00
sda : READ CAPACITY failed.
sda : status = 1, message = 00, host = 0, driver = 08
Current sd00:00: sns = 70 2
ASC=3a ASCQ= 0
Raw sense data:0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x12 0x00 0x00 0x00 0x00 0x3a 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
sda : block size assumed to be 512 bytes, disk size 1GB.
sda: I/O error: dev 08:00, sector 0
I/O error: dev 08:00, sector 0
unable to read partition table
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 3
USB Mass Storage support registered.
Device not ready. Make sure there is a disc in the drive.
sd_init_onedisk (0,0), sda 08:00
sda : READ CAPACITY failed.
sda : status = 1, message = 00, host = 0, driver = 08
Current sd00:00: sns = 70 2
ASC=3a ASCQ= 0
Raw sense data:0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x12 0x00 0x00 0x00 0x00 0x3a 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
sda : block size assumed to be 512 bytes, disk size 1GB.
sda: I/O error: dev 08:00, sector 0
I/O error: dev 08:00, sector 0
unable to read partition table
Device not ready. Make sure there is a disc in the drive.
I/O error: dev 08:00, sector 0
Device not ready. Make sure there is a disc in the drive.
sd_init_onedisk (0,0), sda 08:00
sda : READ CAPACITY failed.
sda : status = 1, message = 00, host = 0, driver = 08
Current sd00:00: sns = 70 2
ASC=3a ASCQ= 0
Raw sense data:0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x12 0x00 0x00 0x00 0x00 0x3a 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
sda : block size assumed to be 512 bytes, disk size 1GB.
sda: I/O error: dev 08:00, sector 0
I/O error: dev 08:00, sector 0
unable to read partition table
Device not ready. Make sure there is a disc in the drive.
sd_init_onedisk (0,0), sda 08:00
sda : READ CAPACITY failed.
sda : status = 1, message = 00, host = 0, driver = 08
Current sd00:00: sns = 70 2
ASC=3a ASCQ= 0
Raw sense data:0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x12 0x00 0x00 0x00 0x00 0x3a 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
sda : block size assumed to be 512 bytes, disk size 1GB.
sda: I/O error: dev 08:00, sector 0
I/O error: dev 08:00, sector 0
unable to read partition table
IPv6 v0.8 for NET4.0
IPv6 over IPv4 tunneling driver
keyboard: Timeout - AT keyboard not present?(f4)
eth0: no IPv6 routers present
keyboard: Timeout - AT keyboard not present?(f4)
keyboard: Timeout - AT keyboard not present?(f4)
keyboard: Timeout - AT keyboard not present?(f4)
keyboard: Timeout - AT keyboard not present?(f4)
keyboard: Timeout - AT keyboard not present?(f4)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
keyboard: Timeout - AT keyboard not present?(f4)
Device not ready. Make sure there is a disc in the drive.
sd_init_onedisk (0,0), sda 08:00
usb-uhci.c: interrupt, status 3, frame# 938
sda : READ CAPACITY failed.
sda : status = 1, message = 00, host = 0, driver = 08
Current sd00:00: sns = 70 2
ASC=3a ASCQ= 0
Raw sense data:0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x12 0x00 0x00 0x00 0x00 0x3a 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
sda : block size assumed to be 512 bytes, disk size 1GB.
sda: I/O error: dev 08:00, sector 0
I/O error: dev 08:00, sector 0
unable to read partition table
Device not ready. Make sure there is a disc in the drive.
I/O error: dev 08:00, sector 0
Device not ready. Make sure there is a disc in the drive.
sd_init_onedisk (0,0), sda 08:00
sda : READ CAPACITY failed.
sda : status = 1, message = 00, host = 0, driver = 08
Current sd00:00: sns = 70 2
ASC=3a ASCQ= 0
Raw sense data:0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x12 0x00 0x00 0x00 0x00 0x3a 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
sda : block size assumed to be 512 bytes, disk size 1GB.
sda: I/O error: dev 08:00, sector 0
I/O error: dev 08:00, sector 0
unable to read partition table
Device not ready. Make sure there is a disc in the drive.
sd_init_onedisk (0,0), sda 08:00
sda : READ CAPACITY failed.
sda : status = 1, message = 00, host = 0, driver = 08
Current sd00:00: sns = 70 2
ASC=3a ASCQ= 0
Raw sense data:0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x12 0x00 0x00 0x00 0x00 0x3a 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
sda : block size assumed to be 512 bytes, disk size 1GB.
sda: I/O error: dev 08:00, sector 0
I/O error: dev 08:00, sector 0
unable to read partition table
I/O error: dev 0b:00, sector 64
cdrom: open failed.
ide-scsi: hdd: unsupported command in request queue (0)
end_request: I/O error, dev 16:40 (hdd), sector 64
ide-scsi: hdd: unsupported command in request queue (0)
end_request: I/O error, dev 16:40 (hdd), sector 66
ide-scsi: hdd: unsupported command in request queue (0)
end_request: I/O error, dev 16:40 (hdd), sector 68
ide-scsi: hdd: unsupported command in request queue (0)
end_request: I/O error, dev 16:40 (hdd), sector 70
ide-scsi: hdd: unsupported command in request queue (0)
end_request: I/O error, dev 16:40 (hdd), sector 72
ide-scsi: hdd: unsupported command in request queue (0)
end_request: I/O error, dev 16:40 (hdd), sector 74
ide-scsi: hdd: unsupported command in request queue (0)
end_request: I/O error, dev 16:40 (hdd), sector 76
ide-scsi: hdd: unsupported command in request queue (0)
end_request: I/O error, dev 16:40 (hdd), sector 78
ide-scsi: hdc: unsupported command in request queue (0)
end_request: I/O error, dev 16:00 (hdc), sector 64
ide-scsi: hdc: unsupported command in request queue (0)
end_request: I/O error, dev 16:00 (hdc), sector 66
ide-scsi: hdc: unsupported command in request queue (0)
end_request: I/O error, dev 16:00 (hdc), sector 68
ide-scsi: hdc: unsupported command in request queue (0)
end_request: I/O error, dev 16:00 (hdc), sector 70
ide-scsi: hdc: unsupported command in request queue (0)
end_request: I/O error, dev 16:00 (hdc), sector 72
ide-scsi: hdc: unsupported command in request queue (0)
end_request: I/O error, dev 16:00 (hdc), sector 74
ide-scsi: hdc: unsupported command in request queue (0)
end_request: I/O error, dev 16:00 (hdc), sector 76
ide-scsi: hdc: unsupported command in request queue (0)
end_request: I/O error, dev 16:00 (hdc), sector 78
Device not ready. Make sure there is a disc in the drive.
sd_init_onedisk (0,0), sda 08:00
sda : READ CAPACITY failed.
sda : status = 1, message = 00, host = 0, driver = 08
Current sd00:00: sns = 70 2
ASC=3a ASCQ= 0
Raw sense data:0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x12 0x00 0x00 0x00 0x00 0x3a 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
sda : block size assumed to be 512 bytes, disk size 1GB.
sda: I/O error: dev 08:00, sector 0
I/O error: dev 08:00, sector 0
unable to read partition table
Device not ready. Make sure there is a disc in the drive.
I/O error: dev 08:00, sector 0
Device not ready. Make sure there is a disc in the drive.
sd_init_onedisk (0,0), sda 08:00
sda : READ CAPACITY failed.
sda : status = 1, message = 00, host = 0, driver = 08
Current sd00:00: sns = 70 2
ASC=3a ASCQ= 0
Raw sense data:0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x12 0x00 0x00 0x00 0x00 0x3a 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
sda : block size assumed to be 512 bytes, disk size 1GB.
sda: I/O error: dev 08:00, sector 0
I/O error: dev 08:00, sector 0
unable to read partition table
Device not ready. Make sure there is a disc in the drive.
sd_init_onedisk (0,0), sda 08:00
sda : READ CAPACITY failed.
sda : status = 1, message = 00, host = 0, driver = 08
Current sd00:00: sns = 70 2
ASC=3a ASCQ= 0
Raw sense data:0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x12 0x00 0x00 0x00 0x00 0x3a 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
sda : block size assumed to be 512 bytes, disk size 1GB.
sda: I/O error: dev 08:00, sector 0
I/O error: dev 08:00, sector 0
unable to read partition table
nvidia: loading NVIDIA Linux x86 NVdriver Kernel Module 1.0-3123 Tue Aug 27 15:56:48 PDT 2002
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 816M
agpgart: Detected Via Apollo Pro KT266 chipset
agpgart: AGP aperture is 64M @ 0xe0000000
NVRM: AGPGART: VIA Apollo KT133 chipset
NVRM: AGPGART: aperture: 64M @ 0xe0000000
NVRM: AGPGART: aperture mapped from 0xe0000000 to 0xf99f2000
NVRM: AGPGART: mode 4x
NVRM: AGPGART: allocated 16 pages
Linux video capture interface: v1.00
eth0: Promiscuous mode enabled.
device eth0 entered promiscuous mode
device eth0 left promiscuous mode
eth0: Promiscuous mode enabled.
device eth0 entered promiscuous mode
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
snocked@linux:~>
 
Old 01-11-2003, 05:09 PM   #2
acid_kewpie
Moderator
 
Registered: Jun 2001
Location: UK
Distribution: Gentoo, RHEL, Fedora, Centos
Posts: 43,417

Rep: Reputation: 1976Reputation: 1976Reputation: 1976Reputation: 1976Reputation: 1976Reputation: 1976Reputation: 1976Reputation: 1976Reputation: 1976Reputation: 1976Reputation: 1976
oh come off it, you could have maybe just pasted the bit that actaully mattered...
 
Old 01-11-2003, 05:13 PM   #3
snocked
Member
 
Registered: Dec 2002
Location: St. Louis, MO
Distribution: Slackware 9.1
Posts: 482

Original Poster
Rep: Reputation: 30
I'm new to linux okay (3 weeks). I didn't know if any information in the beginning what be a possible reason for the errors.
 
Old 01-11-2003, 05:25 PM   #4
MasterC
LQ Guru
 
Registered: Mar 2002
Location: Salt Lake City, UT - USA
Distribution: Gentoo ; LFS ; Kubuntu
Posts: 12,612

Rep: Reputation: 68
Chris, I think that maybe posting the whole thing was a good idea, not too sure though, does this not look like a bad thing:
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2

?

I think that's the where the errors start... But then again, I truly have no idea...

Cool
 
Old 01-11-2003, 05:30 PM   #5
snocked
Member
 
Registered: Dec 2002
Location: St. Louis, MO
Distribution: Slackware 9.1
Posts: 482

Original Poster
Rep: Reputation: 30
I wonder if I should reinstall. I don't know what else to do.

kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2

That is japanese to me.
 
Old 01-11-2003, 05:40 PM   #6
MasterC
LQ Guru
 
Registered: Mar 2002
Location: Salt Lake City, UT - USA
Distribution: Gentoo ; LFS ; Kubuntu
Posts: 12,612

Rep: Reputation: 68
It's not worth reinstalling over...

Are you having problems? This might give you problems when doing something like burning a CD unless you've got scsi drives...

Rebuild a kernel, don't reinstall, that's the win way, not the lin way

Cool
 
Old 01-11-2003, 05:42 PM   #7
snocked
Member
 
Registered: Dec 2002
Location: St. Louis, MO
Distribution: Slackware 9.1
Posts: 482

Original Poster
Rep: Reputation: 30
There was kinda an error when I tried to burn CDs, but I had the option to force it and it burned fine.

Rebuild a kernel? I'm pretty sure I can't do that.
 
Old 01-11-2003, 05:44 PM   #8
MasterC
LQ Guru
 
Registered: Mar 2002
Location: Salt Lake City, UT - USA
Distribution: Gentoo ; LFS ; Kubuntu
Posts: 12,612

Rep: Reputation: 68
Then I wouldn't really worry too much... If you are able to function on your system as you like, let it go. Sooner or later you are gonna get around to building a kernel, and with any luck this error will go away.

Are you just worried because there is an error? I get about 5 different errors during bootup, yes I could fix em, but they give me no trouble with my needs so I don't worry about em.

Cool
 
Old 01-11-2003, 05:50 PM   #9
snocked
Member
 
Registered: Dec 2002
Location: St. Louis, MO
Distribution: Slackware 9.1
Posts: 482

Original Poster
Rep: Reputation: 30
Yep. Just a bit concerned as I was learning some basic commands. And I got to desmg and I looked at the output to notice those errors, which didn't look right.

Last edited by snocked; 01-11-2003 at 05:52 PM.
 
Old 01-11-2003, 06:02 PM   #10
MasterC
LQ Guru
 
Registered: Mar 2002
Location: Salt Lake City, UT - USA
Distribution: Gentoo ; LFS ; Kubuntu
Posts: 12,612

Rep: Reputation: 68
That's cool. If you are really wanna look into takin care of em, check out how-to's and threads on building a new kernel and see if you are up to it. It's worth a shot, worst thing that'll happen is it won't work and you will end up just using this current kernel.

Cool
 
Old 01-11-2003, 06:11 PM   #11
snocked
Member
 
Registered: Dec 2002
Location: St. Louis, MO
Distribution: Slackware 9.1
Posts: 482

Original Poster
Rep: Reputation: 30
Thanks MasterC.
 
Old 01-11-2003, 06:31 PM   #12
Valek
LQ Newbie
 
Registered: Dec 2002
Distribution: Red Hat 8.0
Posts: 17

Rep: Reputation: 0
when I type dmesg this is what I get


Linux version 2.4.18-19.8.0 (bhcompile@tweety.devel.redhat.com) (gcc version 3.2 20020903 (Red Hat Linux 8.0 3.2-7)) #1 Thu Dec 12 04:37:40 EST 2002
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
BIOS-e820: 000000000fff0000 - 000000000fff3000 (ACPI NVS)
BIOS-e820: 000000000fff3000 - 0000000010000000 (ACPI data)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
255MB LOWMEM available.
On node 0 totalpages: 65520
zone(0): 4096 pages.
zone(1): 61424 pages.
zone(2): 0 pages.
Kernel command line: ro root=LABEL=/
Initializing CPU#0
Detected 851.668 MHz processor.
Speakup v-1.00 CVS: Tue Jun 11 14:22:53 EDT 2002 : initialized
Console: colour VGA+ 80x25
Calibrating delay loop... 1687.54 BogoMIPS
Memory: 253064k/262080k available (1312k kernel code, 6584k reserved, 988k data, 172k init, 0k highmem)
Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount cache hash table entries: 4096 (order: 3, 32768 bytes)
ramfs: mounted with options: <defaults>
ramfs: max_pages=31888 max_file_pages=0 max_inodes=0 max_dentries=31888
Buffer cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: Before vendor init, caps: 0183f9ff c1c7f9ff 00000000, vendor = 2
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After vendor init, caps: 0183f9ff c1c7f9ff 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0183f9ff c1c7f9ff 00000000 00000000
CPU: Common caps: 0183f9ff c1c7f9ff 00000000 00000000
CPU: AMD Athlon(tm) Processor stepping 02
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfb440, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Using IRQ router VIA [1106/0686] at 00:07.0
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
speakup: initialized device: /dev/synth, node (MAJOR 10, MINOR 25)
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16)
Starting kswapd
VFS: Diskquotas version dquot_6.5.0 initialized
pty: 2048 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS0 at 0x03f8 (irq = 4) is a 16550A
ttyS1 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10e
block: 480 slots per queue, batch=120
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller on PCI bus 00 dev 39
VP_IDE: chipset revision 16
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt82c686a (rev 22) IDE UDMA66 controller on pci00:07.1
ide0: BM-DMA at 0xc000-0xc007, BIOS settings: hdaMA, hdbio
ide1: BM-DMA at 0xc008-0xc00f, BIOS settings: hdcMA, hddMA
hda: WDC WD600BB-75CAA0, ATA DISK drive
hdc: IDE/ATAPI CD-ROM 52XS, ATAPI CD/DVD-ROM drive
hdd: Pioneer DVD-ROM ATAPIModel DVD-105S 012, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: setmax LBA 117231408, native 117187500
hda: 117187500 sectors (60000 MB) w/2048KiB Cache, CHS=7294/255/63, UDMA(66)
ide-floppy driver 0.99.newide
Partition check:
hda: hda1 hda2 hda3 hda4 < hda5 >
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
NET4: Frame Diverter 0.46
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
ide-floppy driver 0.99.newide
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 126k freed
VFS: Mounted root (ext2 filesystem).
Journalled Block Device driver loaded
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 172k freed
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 04:55:03 Dec 12 2002
usb-uhci.c: High bandwidth mode enabled
PCI: Found IRQ 11 for device 00:07.2
PCI: Sharing IRQ 11 with 00:07.3
PCI: Sharing IRQ 11 with 00:0b.0
usb-uhci.c: USB UHCI at I/O 0xc400, IRQ 11
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Found IRQ 11 for device 00:07.3
PCI: Sharing IRQ 11 with 00:07.2
PCI: Sharing IRQ 11 with 00:0b.0
usb-uhci.c: USB UHCI at I/O 0xc800, IRQ 11
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
EXT3 FS 2.4-0.9.18, 14 May 2002 on ide0(3,3), internal journal
Adding Swap: 522072k swap-space (priority -1)
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.18, 14 May 2002 on ide0(3,2), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport_pc: Via 686A parallel port: io=0x378
ohci1394: pci_module_init failed
ip_tables: (C) 2000-2002 Netfilter core team
PCI: Found IRQ 10 for device 00:09.0
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
00:09.0: 3Com PCI 3c900 Cyclone 10Mbps TPO at 0xdc00. Vers LK1.1.18-ac
divert: allocating divert_blk for eth0
8139too Fast Ethernet driver 0.9.25
PCI: Found IRQ 11 for device 00:0b.0
PCI: Sharing IRQ 11 with 00:07.2
PCI: Sharing IRQ 11 with 00:07.3
divert: allocating divert_blk for eth1
eth1: RealTek RTL8139 Fast Ethernet at 0xd08a5000, 00:d0:09:64:5e:75, IRQ 11
eth1: Identified 8139 chip type 'RTL-8139C'
eth1: Setting half-duplex based on auto-negotiated partner ability 0000.
Via 686a audio driver 1.9.1
PCI: Found IRQ 5 for device 00:07.5
PCI: Sharing IRQ 5 with 00:07.6
ac97_codec: AC97 Audio codec, id: 0x414c:0x4325 (Unknown)
via82cxxx: Codec rate locked at 48Khz
via82cxxx: board #1 at 0xCC00, IRQ 5
Enabled Via MIDI
via_audio: ignoring drain playback error -11
via_audio: ignoring drain playback error -11
ide-floppy driver 0.99.newide
hdc: ATAPI 52X CD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.12
hdd: ATAPI 40X DVD-ROM drive, 512kB Cache
via_audio: ignoring drain playback error -11
via_audio: ignoring drain playback error -11
Assertion failed! buffer != NULL,via82cxxx_audio.c,via_dsp_write,line=2308
Assertion failed! buffer != NULL,via82cxxx_audio.c,via_dsp_write,line=2308
Assertion failed! buffer != NULL,via82cxxx_audio.c,via_dsp_write,line=2308
Assertion failed! buffer != NULL,via82cxxx_audio.c,via_dsp_write,line=2308
Assertion failed! buffer != NULL,via82cxxx_audio.c,via_dsp_write,line=2308
Assertion failed! buffer != NULL,via82cxxx_audio.c,via_dsp_write,line=2308
Assertion failed! buffer != NULL,via82cxxx_audio.c,via_dsp_write,line=2308
via_audio: ignoring drain playback error -11
via_audio: ignoring drain playback error -11
Assertion failed! buffer != NULL,via82cxxx_audio.c,via_dsp_write,line=2308
Assertion failed! buffer != NULL,via82cxxx_audio.c,via_dsp_write,line=2308
Assertion failed! buffer != NULL,via82cxxx_audio.c,via_dsp_write,line=2308
Assertion failed! buffer != NULL,via82cxxx_audio.c,via_dsp_write,line=2308
Assertion failed! buffer != NULL,via82cxxx_audio.c,via_dsp_write,line=2308
via_audio: ignoring drain playback error -11
Assertion failed! buffer != NULL,via82cxxx_audio.c,via_dsp_write,line=2308
Assertion failed! buffer != NULL,via82cxxx_audio.c,via_dsp_write,line=2308
Assertion failed! buffer != NULL,via82cxxx_audio.c,via_dsp_write,line=2308
Assertion failed! buffer != NULL,via82cxxx_audio.c,via_dsp_write,line=2308
Assertion failed! buffer != NULL,via82cxxx_audio.c,via_dsp_write,line=2308
Assertion failed! buffer != NULL,via82cxxx_audio.c,via_dsp_write,line=2308
Assertion failed! buffer != NULL,via82cxxx_audio.c,via_dsp_write,line=2308
Assertion failed! buffer != NULL,via82cxxx_audio.c,via_dsp_write,line=2308
Assertion failed! buffer != NULL,via82cxxx_audio.c,via_dsp_write,line=2308
Assertion failed! buffer != NULL,via82cxxx_audio.c,via_dsp_write,line=2308
Assertion failed! buffer != NULL,via82cxxx_audio.c,via_dsp_write,line=2308
Assertion failed! buffer != NULL,via82cxxx_audio.c,via_dsp_write,line=2308
Assertion failed! buffer != NULL,via82cxxx_audio.c,via_dsp_write,line=2308
Assertion failed! buffer != NULL,via82cxxx_audio.c,via_dsp_write,line=2308
via_audio: ignoring drain playback error -11
Assertion failed! buffer != NULL,via82cxxx_audio.c,via_dsp_write,line=2308
Assertion failed! buffer != NULL,via82cxxx_audio.c,via_dsp_write,line=2308
Assertion failed! buffer != NULL,via82cxxx_audio.c,via_dsp_write,line=2308
Assertion failed! buffer != NULL,via82cxxx_audio.c,via_dsp_write,line=2308
Assertion failed! buffer != NULL,via82cxxx_audio.c,via_dsp_write,line=2308
Assertion failed! buffer != NULL,via82cxxx_audio.c,via_dsp_write,line=2308
Assertion failed! buffer != NULL,via82cxxx_audio.c,via_dsp_write,line=2308
Assertion failed! buffer != NULL,via82cxxx_audio.c,via_dsp_write,line=2308
Assertion failed! buffer != NULL,via82cxxx_audio.c,via_dsp_write,line=2308
Assertion failed! buffer != NULL,via82cxxx_audio.c,via_dsp_write,line=2308
via_audio: ignoring drain playback error -11
Assertion failed! buffer != NULL,via82cxxx_audio.c,via_dsp_write,line=2308
Assertion failed! buffer != NULL,via82cxxx_audio.c,via_dsp_write,line=2308
Assertion failed! buffer != NULL,via82cxxx_audio.c,via_dsp_write,line=2308
via_audio: ignoring drain playback error -11
Assertion failed! buffer != NULL,via82cxxx_audio.c,via_dsp_write,line=2308
Assertion failed! buffer != NULL,via82cxxx_audio.c,via_dsp_write,line=2308
Assertion failed! buffer != NULL,via82cxxx_audio.c,via_dsp_write,line=2308
Assertion failed! buffer != NULL,via82cxxx_audio.c,via_dsp_write,line=2308
Assertion failed! buffer != NULL,via82cxxx_audio.c,via_dsp_write,line=2308
 
Old 01-11-2003, 06:34 PM   #13
snocked
Member
 
Registered: Dec 2002
Location: St. Louis, MO
Distribution: Slackware 9.1
Posts: 482

Original Poster
Rep: Reputation: 30
Hmm you have errors too. Any audio problems?
 
Old 01-11-2003, 06:50 PM   #14
MasterC
LQ Guru
 
Registered: Mar 2002
Location: Salt Lake City, UT - USA
Distribution: Gentoo ; LFS ; Kubuntu
Posts: 12,612

Rep: Reputation: 68
Again, it's nothing major, nothing to really worry about. If you are having problems however, with audio as snocked pointed out, then maybe it's something you'd like to address and fix. If you are concerned go ahead and post your /etc/modules.conf file and maybe someone will take a look and see something wrong. However, I REALLY wouldn't worry about it though if you aren't experiencing any problems.

Cool
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



Similar Threads
Thread Thread Starter Forum Replies Last Post
dmesg question? Lleb_KCir Linux - General 3 11-09-2005 02:00 PM
dmesg -What's it all mean? shilo Slackware 2 09-05-2004 05:58 AM
dmesg HELP oldi Slackware 7 07-17-2004 10:14 AM
/bin/dmesg > /dmesg-boot not Working in Knoppix 3.4 suguru Debian 2 07-04-2004 06:21 PM
dmesg XPediTioN Slackware 22 07-17-2003 09:21 PM

LinuxQuestions.org > Forums > Linux Forums > Linux - Newbie

All times are GMT -5. The time now is 06:36 PM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration