SuSE 9.1 on IDE, not seeing 4 SCSI drives.
 

I've new to all of this, and I'm looking for advice and recommendations. Simply enough, where do I start to get SuSE to recognize my 4 SCSI drives? This is what I've got so far:

tim@linux:/> cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: SEAGATE Model: ST318275LW Rev: 0001
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 01 Lun: 00
Vendor: SEAGATE Model: ST318275LW Rev: 0001
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi1 Channel: 00 Id: 00 Lun: 00
Vendor: SEAGATE Model: ST318275LW Rev: 0001
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi1 Channel: 00 Id: 01 Lun: 00
Vendor: SEAGATE Model: ST318275LW Rev: 0001
Type: Direct-Access ANSI SCSI revision: 02
tim@linux:/>

Of the 4 drives, 2 are FAT32 and 2 are NTFS. There is no data on the NTFS drives, I'm interested in accessing the 2 FAT32 drives. So... if these exist, how do I access them? When I open up my computer-devices I see the following:

Cd Recorder
Floppy
Hard Disc (hdb2) [/]
Hard Disc [/sys]

When I open up Hard Disc [/sys], i get the following error:

mount: only root can mount sysfs on /sys
Please check that the disk is entered correctly.

Thoughts?

Standard format,

mount -t vfat /dev/sda1 /mnt/c
mount -t vfat /dev/sdb1 /mnt/d
mount -t ntfs /dev/sdc1 /mnt/e
mount -t ntfs /dev/sdd1 /mnt/e

I'm guessing what drives have those FS's and partitions. But that covers it. You cannot write to NTFS drives by default(without pirating libraries). You can only read. For fat32, you can read/write.

I just edited and noticed your reply. I wanted to add that I would like to access the existing data on the FAT32 drives.

here is my fdisk info

linux:/home/tim # fdisk -l

Disk /dev/hdb: 40.9 GB, 40982151168 bytes
16 heads, 63 sectors/track, 79408 cylinders
Units = cylinders of 1008 * 512 = 516096 bytes

Device Boot Start End Blocks Id System
/dev/hdb1 1 1016 512032+ 82 Linux swap
/dev/hdb2 1017 79408 39509568 83 Linux

Disk /dev/sda: 18.2 GB, 18210029056 bytes
255 heads, 63 sectors/track, 2213 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

Device Boot Start End Blocks Id System
/dev/sda1 * 1 2213 17775891 c W95 FAT32 (LBA)

Disk /dev/sdb: 18.2 GB, 18210029056 bytes
255 heads, 63 sectors/track, 2213 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

Device Boot Start End Blocks Id System
/dev/sdb1 * 1 13 104391 8e Linux LVM
/dev/sdb2 14 2213 17671500 8e Linux LVM

Disk /dev/sdc: 18.2 GB, 18210029056 bytes
255 heads, 63 sectors/track, 2213 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

Device Boot Start End Blocks Id System
/dev/sdc1 * 1 2213 17775891 c W95 FAT32 (LBA)

Disk /dev/sdd: 18.2 GB, 18210029056 bytes
255 heads, 63 sectors/track, 2213 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

Device Boot Start End Blocks Id System
/dev/sdd1 * 1 2213 17775891 7 HPFS/NTFS

my mistake, one drive is Linux (old FC3 install).