speedtouch usb modem problem, please help!!!
Hi there I am having problems with my alcatel speedtouch modem. I have followed this guide:
webconexion.net/speedtouch/index.php
I have downloaded all the files and drivers it tells me to and followed the guide 100% properly and still getting problems. I edited all the files as said in the guide and when I restarted I get an error befor I get in to linux loggin:
STARTING ADSL CONNECTION: USB_CONTROL/BULK_MSG: TIMEOUT
Usbdevfs: USBDEVFS_BULK failed dev 2 ep 0x85 len 512 ret –110
HDLC line disciplone version $revision 3.3 $ maxframe=4096
I then log in to the root account and then I go to var/log/message and the below is said about the adsl:
Nov 14 11:51:26 Mike modem_run[967]: modem_run version 1.1 started by root uid 0
Nov 14 11:51:28 Mike kernel: usb_control/bulk_msg: timeout
Nov 14 11:51:28 Mike kernel: usbdevfs: USBDEVFS_BULK failed dev 2 ep 0x85 len 512 ret -110
Nov 14 11:51:44 Mike modem_run[967]: ADSL synchronization has been obtained
Nov 14 11:51:44 Mike modem_run[967]: ADSL line is up (576 kbit/s down | 288 kbit/s up)
Nov 14 11:51:46 Mike kernel: HDLC line discipline: version $Revision: 3.3 $, maxframe=4096
Nov 14 11:51:46 Mike kernel: N_HDLC line discipline registered.
Nov 14 11:51:46 Mike kernel: CSLIP: code copyright 1989 Regents of the University of California
Nov 14 11:51:46 Mike kernel: PPP generic driver version 2.4.2
Nov 14 11:51:46 Mike pppd[975]: pppd 2.4.1 started by root, uid 0
Nov 14 11:51:46 Mike pppd[975]: Using interface ppp0
Nov 14 11:51:46 Mike pppd[975]: Connect: ppp0 <--> /dev/pts/0
Nov 14 11:51:46 Mike pppoa3[978]: VPI and/or VCI value(s) missing
Nov 14 11:51:46 Mike pppd[975]: Modem hangup
Nov 14 11:51:46 Mike pppd[975]: Connection terminated.
Nov 14 11:51:46 Mike pppd[975]: Using interface ppp0
Nov 14 11:51:46 Mike pppd[975]: Connect: ppp0 <--> /dev/pts/0
Nov 14 11:51:46 Mike pppoa3[987]: VPI and/or VCI value(s) missing
Nov 14 11:51:46 Mike pppd[975]: Modem hangup
Nov 14 11:51:46 Mike pppd[975]: Connection terminated.
Nov 14 11:51:46 Mike pppoa3[1001]: VPI and/or VCI value(s) missing
Nov 14 11:51:46 Mike pppd[975]: Connect: ppp0 <--> /dev/pts/0
Nov 14 11:51:46 Mike pppd[975]: ioctl(PPPIOCSASYNCMAP): Inappropriate ioctl for device(25)
Nov 14 11:51:46 Mike pppd[975]: tcflush failed: Input/output error
Nov 14 11:51:46 Mike pppd[975]: Exit.
Nov 14 11:51:46 Mike /etc/hotplug/net.agent: assuming ppp0 is already up
Nov 14 11:51:46 Mike /etc/hotplug/net.agent: assuming ppp0 is already up
Nov 14 11:51:46 Mike /etc/hotplug/net.agent: NET unregister event not supported
Nov 14 11:51:46 Mike /etc/hotplug/net.agent: assuming ppp0 is already up
Nov 14 11:51:46 Mike /etc/hotplug/net.agent: NET unregister event not supported
Nov 14 11:51:46 Mike /etc/hotplug/net.agent: NET unregister event not supported
Nov 14 11:52:47 Mike anacron: anacron startup succeeded
Nov 14 11:52:47 Mike atd: atd startup succeeded
Nov 14 11:52:48 Mike rc: Starting mdmonitor: succeeded
Nov 14 11:53:03 Mike gdm(pam_unix)[1365]: check pass; user unknown
Nov 14 11:53:03 Mike gdm(pam_unix)[1365]: authentication failure; logname= uid=0 euid=0 tty=:0 ruser=gdm rhost=localhost
Please can any one tell me where is have gone wrong or what patches or updates I need to do. Thanks allot,
mike
|