alirezan1 |
03-19-2009 01:41 PM |
smartmontools on SAS drive?
How can I use smartmontools to monitor my SAS drives? SMART is enabled on the disks but when I do smartctl -a or -c I don't get much:
Quote:
> smartctl -i /dev/sda
Device: FUJITSU MBB2147RC Version: 0105
Serial number: BS00P8901VU7
Device type: disk
Transport protocol: SAS
Local Time is: Thu Mar 19 12:26:28 2009 GMT
Device supports SMART and is Enabled
Temperature Warning Enabled
|
Quote:
> smartctl -a /dev/sda
Device: FUJITSU MBB2147RC Version: 0105
Serial number: BS00P8901VU7
Device type: disk
Transport protocol: SAS
Local Time is: Thu Mar 19 12:27:31 2009 GMT
Device supports SMART and is Enabled
Temperature Warning Enabled
SMART Health Status: OK
Current Drive Temperature: 24 C
Drive Trip Temperature: 65 C
Manufactured in week 39 of year 2008
Recommended maximum start stop count: 50000 times
Current start stop count: 23 times
Elements in grown defect list: 0
Error counter log:
Errors Corrected by Total Correction Gigabytes Total
ECC rereads/ errors algorithm processed uncorrected
fast | delayed rewrites corrected invocations [10^9 bytes] errors
read: 0 0 0 0 0 4699.631 0
write: 0 0 0 0 0 222.858 0
Non-medium error count: 59500
SMART Self-test log
Num Test Status segment LifeTime LBA_first_err [SK ASC ASQ]
Description number (hours)
# 1 Background long Completed - 527 - [- - -]
Long (extended) Self Test duration: 2045 seconds [34.1 minutes]
|
any ideas?
Thanks
|