scanpci sees nic in pci-slot but lspci doesn't
Hi,
i am not able to configure one NIC in a PCI-E Slot because the System (sles10_sp2_64bit) doesn't see see card with lspci or hwinfo. When we use scanpci, we do see the card. When we boot the System with a Knoppix- or OpenSuse11-LiveCD,then all is fine. The lspci stops at pci bus 0x0040, the scanpci not - Any Ideas? Regards, Holger # scanpci | tail -26 pci bus 0x0018 cardnum 0x00 function 0x00: vendor 0x14e4 device 0x164c Broadcom Corporation NetXtreme II BCM5708 Gigabit Ethernet pci bus 0x0038 cardnum 0x0d function 0x00: vendor 0x1166 device 0x0104 Broadcom HT1000 PCI/PCI-X bridge pci bus 0x0040 cardnum 0x0f function 0x00: vendor 0x1166 device 0x0140 Broadcom Device unknown pci bus 0x0040 cardnum 0x10 function 0x00: vendor 0x1166 device 0x0142 Broadcom Device unknown pci bus 0x0040 cardnum 0x11 function 0x00: vendor 0x1166 device 0x0144 Broadcom Device unknown pci bus 0x0040 cardnum 0x12 function 0x00: vendor 0x1166 device 0x0142 Broadcom Device unknown pci bus 0x0040 cardnum 0x13 function 0x00: vendor 0x1166 device 0x0144 Broadcom Device unknown pci bus 0x0051 cardnum 0x00 function 0x00: vendor 0x8086 device 0x105e Intel Corporation 82571EB Gigabit Ethernet Controller pci bus 0x0051 cardnum 0x00 function 0x01: vendor 0x8086 device 0x105e Intel Corporation 82571EB Gigabit Ethernet Controller # lspci | tail 00:19.1 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] Address Map 00:19.2 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] DRAM Controller 00:19.3 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] Miscellaneous Control 00:19.4 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] Link Control 01:00.0 RAID bus controller: Adaptec AAC-RAID (Rocket) (rev 02) 0c:00.0 PCI bridge: Broadcom EPB PCI-Express to PCI-X Bridge (rev c3) 0d:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5708 Gigabit Ethernet (rev 12) 17:00.0 PCI bridge: Broadcom EPB PCI-Express to PCI-X Bridge (rev c3) 18:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5708 Gigabit Ethernet (rev 12) 38:0d.0 PCI bridge: Broadcom BCM5785 [HT1000] PCI/PCI-X Bridge (rev c0) |
All times are GMT -5. The time now is 12:12 PM. |