hi everybody,
perviously iam using windows xp in my local machine and i shift to 32 bits rhel6 i have successfully installed in my local machine. when working with windows xp my CRT monitor supports graphics setting upto 1024 X 768 but after installing rhel6 it has only one resolution 640 X 480, its difficult to use linux for me. 2.6.32-71.el6.i686 this is my kernel of linux. so how i was able to use screen resolution 1024 X 768 in rhel6...? is there any way to handle this problem or i was not able to use high resolution. iam new to linux if somebody guide me right way i'll be greatful.


# lspci -v
00:00.0 Host bridge: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface (rev 01)
Subsystem: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface
Flags: bus master, fast devsel, latency 0
Memory at f8000000 (32-bit, prefetchable) [size=64M]
Capabilities: [e4] Vendor Specific Information <?>
Kernel driver in use: agpgart-intel

00:02.0 VGA compatible controller: Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device (rev 01) (prog-if 00 [VGA controller])
Subsystem: Intel Corporation Device 5641
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at f0000000 (32-bit, prefetchable) [size=128M]
Memory at ffa80000 (32-bit, non-prefetchable) [size=512K]
Expansion ROM at <unassigned> [disabled]
Capabilities: [d0] Power Management version 1
Kernel modules: i915

00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 01) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device 5641
Flags: bus master, medium devsel, latency 0, IRQ 16
I/O ports at e800 [size=32]
Kernel driver in use: uhci_hcd

00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 01) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device 5641
Flags: bus master, medium devsel, latency 0, IRQ 19
I/O ports at e880 [size=32]
Kernel driver in use: uhci_hcd

00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 01) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device 5641
Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at ec00 [size=32]
Kernel driver in use: uhci_hcd

00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 01) (prog-if 20 [EHCI])
Subsystem: Intel Corporation Device 5641
Flags: bus master, medium devsel, latency 0, IRQ 23
Memory at ffa7fc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Capabilities: [58] Debug port: BAR=1 offset=0080
Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 81) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
Memory behind bridge: ff800000-ff8fffff
Prefetchable memory behind bridge: e6a00000-e6afffff

00:1f.0 ISA bridge: Intel Corporation 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge (rev 01)
Flags: bus master, medium devsel, latency 0
Kernel modules: iTCO_wdt, intel-rng

00:1f.1 IDE interface: Intel Corporation 82801DB (ICH4) IDE Controller (rev 01) (prog-if 8a [Master SecP PriP])
Subsystem: Intel Corporation Device 5641
Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at 01f0 [size=8]
I/O ports at 03f4 [size=1]
I/O ports at 0170 [size=8]
I/O ports at 0374 [size=1]
I/O ports at ffa0 [size=16]
Memory at 20000000 (32-bit, non-prefetchable) [size=1K]
Kernel driver in use: ata_piix
Kernel modules: ata_piix

00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 01)
Subsystem: Intel Corporation Device 5641
Flags: medium devsel, IRQ 17
I/O ports at e000 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801

00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 01)
Subsystem: Intel Corporation Device 0208
Flags: bus master, medium devsel, latency 0, IRQ 17
I/O ports at e400 [size=256]
I/O ports at e080 [size=64]
Memory at ffa7f800 (32-bit, non-prefetchable) [size=512]
Memory at ffa7f400 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Kernel driver in use: Intel ICH
Kernel modules: snd-intel8x0

01:02.0 Ethernet controller: Atheros Communications Inc. AR5007G Wireless Network Adapter (rev 01)
Subsystem: Atheros Communications Inc. Device 2055
Flags: bus master, medium devsel, latency 168, IRQ 18
Memory at ff8f0000 (32-bit, non-prefetchable) [size=64K]
Capabilities: [44] Power Management version 2
Kernel driver in use: ath5k
Kernel modules: ath5k

[root@client Packages]# clear

[root@client Packages]# lspci -v
00:00.0 Host bridge: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface (rev 01)
Subsystem: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface
Flags: bus master, fast devsel, latency 0
Memory at f8000000 (32-bit, prefetchable) [size=64M]
Capabilities: [e4] Vendor Specific Information <?>
Kernel driver in use: agpgart-intel

00:02.0 VGA compatible controller: Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device (rev 01) (prog-if 00 [VGA controller])
Subsystem: Intel Corporation Device 5641
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at f0000000 (32-bit, prefetchable) [size=128M]
Memory at ffa80000 (32-bit, non-prefetchable) [size=512K]
Expansion ROM at <unassigned> [disabled]
Capabilities: [d0] Power Management version 1
Kernel modules: i915

00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 01) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device 5641
Flags: bus master, medium devsel, latency 0, IRQ 16
I/O ports at e800 [size=32]
Kernel driver in use: uhci_hcd

00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 01) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device 5641
Flags: bus master, medium devsel, latency 0, IRQ 19
I/O ports at e880 [size=32]
Kernel driver in use: uhci_hcd

00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 01) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device 5641
Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at ec00 [size=32]
Kernel driver in use: uhci_hcd

00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 01) (prog-if 20 [EHCI])
Subsystem: Intel Corporation Device 5641
Flags: bus master, medium devsel, latency 0, IRQ 23
Memory at ffa7fc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Capabilities: [58] Debug port: BAR=1 offset=0080
Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 81) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
Memory behind bridge: ff800000-ff8fffff
Prefetchable memory behind bridge: e6a00000-e6afffff

00:1f.0 ISA bridge: Intel Corporation 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge (rev 01)
Flags: bus master, medium devsel, latency 0
Kernel modules: iTCO_wdt, intel-rng

00:1f.1 IDE interface: Intel Corporation 82801DB (ICH4) IDE Controller (rev 01) (prog-if 8a [Master SecP PriP])
Subsystem: Intel Corporation Device 5641
Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at 01f0 [size=8]
I/O ports at 03f4 [size=1]
I/O ports at 0170 [size=8]
I/O ports at 0374 [size=1]
I/O ports at ffa0 [size=16]
Memory at 20000000 (32-bit, non-prefetchable) [size=1K]
Kernel driver in use: ata_piix
Kernel modules: ata_piix

00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 01)
Subsystem: Intel Corporation Device 5641
Flags: medium devsel, IRQ 17
I/O ports at e000 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801

00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 01)
Subsystem: Intel Corporation Device 0208
Flags: bus master, medium devsel, latency 0, IRQ 17
I/O ports at e400 [size=256]
I/O ports at e080 [size=64]
Memory at ffa7f800 (32-bit, non-prefetchable) [size=512]
Memory at ffa7f400 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Kernel driver in use: Intel ICH
Kernel modules: snd-intel8x0

01:02.0 Ethernet controller: Atheros Communications Inc. AR5007G Wireless Network Adapter (rev 01)
Subsystem: Atheros Communications Inc. Device 2055
Flags: bus master, medium devsel, latency 168, IRQ 18
Memory at ff8f0000 (32-bit, non-prefetchable) [size=64K]
Capabilities: [44] Power Management version 2
Kernel driver in use: ath5k
Kernel modules: ath5k

First, don't post the same question multiple times, as you've been asked about before. Second, you don't need to post EVERYTHING from an lspci, when you're asking about your video setup.

And did you bother to try to look this up?? Put in "rhel 6 change resolution" into Google, and you get LOTS, like this:
http://www.techotopia.com/index.php/...tiple_Monitors

And AGAIN...if you're not PAYING for RHEL, you shouldn't be using it.

and third, you should have wrapped the output of lspci in code tags, it makes things a whole lot easier to read and understand.

eg

1 members found this post helpful.

Please post your thread in only one forum. Posting a single thread in the most relevant forum will make it easier for members to help you and will keep the discussion in one place. This thread is being closed because it is a duplicate.


http://www.linuxquestions.org/questi...0-only-909030/

1 members found this post helpful.