LinuxQuestions.org

LinuxQuestions.org (/questions/)
-   Linux - Newbie (https://www.linuxquestions.org/questions/linux-newbie-8/)
-   -   Raising a file size download limit of an Ubuntu 14.04 64 bit Live DVD (https://www.linuxquestions.org/questions/linux-newbie-8/raising-a-file-size-download-limit-of-an-ubuntu-14-04-64-bit-live-dvd-4175526457/)

jyunker 11-25-2014 09:43 AM

Raising a file size download limit of an Ubuntu 14.04 64 bit Live DVD
 
I am trying to download a file using my Ubuntu 14.04 Linux Live 64 bit, DVD. The file size is 2.2 Gb and when I try to download it says that that the file size limit is 2 GB and thus will not download the file. After it is downloaded it must be gunzipped so it will become even bigger.

How can I do this? I would rather not have to install Ubuntu on my hardrive just to download and install this file. So I guess that I must find a way to raise the file size download limit. It probably should be increased substantially, if this is possible.

How do I do it?

Any help appreciated.

Thanks in advance.

R,

jyunker

eSelix 11-25-2014 10:44 AM

Maybe you are trying to download it on filesystem without enough free space (ram disk?) or this filesystem does not support files above 2GiB. Please specify more details, like where you are downloading it (filesystem and its free space).

Didier Spaier 11-25-2014 10:47 AM

Please tell us where you want to download the file, and which tool you use (ftp, wget, ...).

I just hope you don't want to download it in RAM ;)

jyunker 11-25-2014 11:31 AM

Gettting more than 4 GB from Create Startup disk memory
 
Both of you have a point there. Although I think that I have enough ram on the host computer, I cannot be sure. It is not my computer which is why I am
using a Live DVD.

Alternate idea:

I installed Ubuntu 14.04, 64 bit system on a thumb drive. It installed quite easily. I used
my trusty old Ubuntu `4.04, 64 bot, Live DVD to do it. I also used the command line argument

create startup disk.

I wanted to be able to boot off of this thumb drive when it is complete. Now when I finished giving
the source and the location for each system, it asked if I wanted to expand the memory.

It gave me a choice on a horizontal, sliding button that went up to 4 GB.

I used up to three GB, then 4 GB - no luck in either situation. I was able to download the 2.2 GB file okay.

However, when I went to gunzip it, I again got an insufficient space failure.

I need more than 4GB, the maximum the horizontal slider would allow.

So how may I get more that 4 GB when I am creating this boot-up Ubuntu thumbdrive.

Any help appreciated.

Thanks in advance.

R,

jyunker

michaelk 11-25-2014 11:32 AM

What are you trying to accomplish and what file are you trying to download and install?

Not sure if it is a OS or hardware limit. Basically a live OS runs only from RAM and anything downloaded and installed consumes RAM. How much total and free RAM do you have?

PS:
I believe the storage space is a casper file which is limited to 4GB. If true then it is possible to create more space.

http://www.pendrivelinux.com/create-...per-partition/

jyunker 11-25-2014 12:54 PM

My project
 
Okay what I am trying to do is to setup a Parallella system on a micro-sd card. It also uses
a Ubuntu 14.04 system though I think it is 32 bits.


I just have used anything like Windows in a long time,

thus I am using the command for an Ubuntu operating system.

The file for Ubuntu on a Parallella is about 2.2 GB and when you gun zip it, it is larger.

So I have the commands, but the Ubuntu files for the Parallella system is big.

Hence, the problem.

R,

jyunker

michaelk 11-25-2014 01:42 PM

So is this what you are trying to do?
http://www.parallella.org/create-sdcard/

The USB startup disk is still a live version so it runs from RAM and I assume that you do not want to create the card via windows. You can install a full version to a flash drive but if this is all you need Ubuntu for then it is probably going to take more time then it is worth at the moment.

You can mount the c: drive or a another USB flash drive and download the file to it using the live DVD or live USB. You might have to change the download directory location in the web browser. Then follow the instructions on the website.

jyunker 11-25-2014 02:38 PM

Response
 
Yes, that is what I am trying to do. I continually run into low memory. I did prepare my thumb drive as
a fully in stalled Ubuntu system on a 16 GB thumb drive. It downloaded the file correctly, but did not
allow me to gunzip it because of memory issues -again.

I then reinstalled Ubuntu 4.04 64 bits, on the thumbdrive, but asked for the maximum memory - 4 GB. Again it would not work.

Please understand that the thumb drive is bootable and has a complete Ubuntu install on it. No Live DVD here.

Any help appreciated.


R,

jyunker

Didier Spaier 11-25-2014 02:56 PM

To help us investigate, please issue following commands just before the "gunzip" command and post the output.
Code:

lsblk -o NAME,SIZE,MOUNTPOINT,FSTYPE,TYPE,MODEL
df -h
free


michaelk 11-25-2014 03:16 PM

As far as I know if you used create startup disk then it is a live version not a full install. As stated the 4GB max storage size is due to the limitations of the casper file system.

A full install needs about 5GB and with automatic partitioning should of used the entire disk drive. You should have more then 4GB of storage with a 16GB flash drive.

You can increase casper storage.
http://www.pendrivelinux.com/create-...per-partition/

yancek 11-25-2014 05:39 PM

In post #4 you indicate you used startup disk creator which creates a Live CD on flash. In a later post you indicate that you did an actual full install to the flash drive so can you clarify this. If the former is on a FAT32 formatted system, you can't create a casper-rw file larger than 4GB but you can if you use a Linux filesystem.

jefro 11-25-2014 07:45 PM

http://cdimage.ubuntu.com/netboot/14.04/

Get the netboot version maybe.

EDDY1 11-26-2014 02:08 AM

Why not just download the file in windows as an iso?
If you don't want to burn it in wins you can reboot to your thumb drive & navigate to the directory where you stored it, C:\Users\<username>\Downloads & burn it.

jyunker 11-26-2014 07:48 AM

I actually created a LiveThumbdrive and a bootable Ubuntu thumb drive. I did both. Neither seemed to be successful.

R,

jyunker

Didier Spaier 11-26-2014 08:03 AM

I suspect that you are expanding the image in RAM and that just can't work because you don't have enough available RAM. Providing information requested in post #9 would allow us to confirm or infirm that assumption.

If you don't provide the information we need, we can't help you.

michaelk 11-26-2014 08:19 AM

If you are unable or uncomfortable with using windows to create the SD card then let us know.

Unless you down load the file to the windows drive a live version will not work. Lets forget about messing with increasing storage.

If you are uncomfortable or do not want to download the file to the windows drive then you need to install a full version to the flash drive (not a start disk). If you are uncomfortable with making sure you select the USB drive we will help.

We have suggest several options but you have not answered any of our questions.

jyunker 11-26-2014 03:02 PM

Installing Ubuntu on thumbdrive
 
Here is the output when I put in the commands:


Code:

ubuntu@ubuntu:~$ lsblk -o NAME,SIZE,MOUNTPOINT,FSTYPE,TYPE,MODEL
NAME    SIZE MOUNTPOINT FSTYPE TYPE MODEL
sda    465.8G                  disk WDC WD5000BEVT-8
├─sda1  128M                  part
├─sda2 449.2G                  part
└─sda3  16.5G                  part
sdb    14.9G                  disk USB Flash Drive
└─sdb1  14.9G /cdrom            part
sr0    1024M                  rom  DVD RW AD-7580S
loop0      1G /rofs            loop
loop1      4G                  loop
ubuntu@ubuntu:~$ df -h
Filesystem      Size  Used Avail Use% Mounted on
/cow            3.9G  112M  3.6G  3% /
udev            2.0G  4.0K  2.0G  1% /dev
tmpfs          392M  1.1M  391M  1% /run
/dev/sdb1        15G  5.1G  9.9G  35% /cdrom
/dev/loop0      1.1G  1.1G    0 100% /rofs
none            4.0K    0  4.0K  0% /sys/fs/cgroup
tmpfs          2.0G  1.1M  2.0G  1% /tmp
none            5.0M  8.0K  5.0M  1% /run/lock
none            2.0G  248K  2.0G  1% /run/shm
none            100M  68K  100M  1% /run/user
ubuntu@ubuntu:~$ free
            total      used      free    shared    buffers    cached
Mem:      4012468    1968528    2043940    219704    185812    1133012
-/+ buffers/cache:    649704    3362764
Swap:            0          0          0
ubuntu@ubuntu:~$

Now I am just using a thumb drive as a live dvd (Livethumbdrive?). I have booted
from this LiveThumbdrive. I have not installed Ubuntu 14.04 on it just the
part that allows one to boot to a Livethumbdrive.

Now I may have said previously that I installed Ubuntu 14.04 on the thumbdrive, but I was wrong.
I want to try that now. My choice is to do that now.

If I boot from say the LiveDVD and want to install Ubuntu on my thumbdrive instead of just trying it; how do I do that?

The C: drive on the windows 7 laptop that I am using must not be touched in any way. I just want to install
Ubuntu 14.04, 64 bit, on my thumbdrive, using my LiveDVD as source. Can it be done and if so how?

Any help appreciated.

Thanks in advance.

michaelk 11-26-2014 04:18 PM

Yes, The two important steps are selecting something else to manually partition and select the USB drive. When it gets to installing the boot loader make sure you select the USB drive. The internal hard drive should be sda and the USB sdb.

You really only need 1 partition for /. With 4GB swap is not necessary.


All times are GMT -5. The time now is 09:53 PM.