PuppyLinux only wanted to boot from hard disk, don't need/want Windows
I have a donated P.C. was running very slow XP. So I removed all windows to preserve privacy of donation owner.
Can I do without GRUB, System will run puppy fine if I allow it to boot from CD. I would like to have it just boot up to Puppy. following facts: Computer : hp pavilion xt938 Phoenix Bios Rev. 3.08 08/31/01 Core ver. 4.06 Primary Maxtor 4D060H3-(PM) Installed Memory 256MB/100 MHz Boot Device Priority: ATAPI CD-Rom -Removable Devices Legacy Floppy Drives -Hard Drive Maxtor 4D060H3-(PM) Bootable Add-in Cards Cfdisk info: Name Flags Part Type FS Type Label Size Unusable 131.61 Sda1 Boot Primary FAT16 1077.52 Sda4 Primary W95 FAT32 847.21 Sda2 Primary Linux swap/ Solars 5116.13 Sda3 Primary Linux ext3 54303.30 54303.30 Question: is there a way in Cfdisk to copy the screen, I see a p for print command but, it just prints to the screen, how can I copy this data without re-typing it? Message from grub, couldn’t make understand enough to fix… Grub was successfully installed on the linux partition /dev/sda3. You should check and edit the ‘/boot/grub/menu.lst’ file on ‘/dev’sda3’, if needed. You may want to change the location ‘/boot/vmlinuz’, and /or options passed to any Linux kernel listed there. GRUB Loading stage1.5 GRUB loading, please wait… Error 17 # GRUB configuration file '/boot/grub/menu.lst'. # generated by 'grubconfig'. Mon Jan 11 14:51:35 2010 # # Start GRUB global section #timeout 30 color light-gray/blue black/light-gray # End GRUB global section # Linux bootable partition config begins title Linux (on /dev/sda3) root (hd0,2) kernel /boot/vmlinuz root=/dev/sda3 ro vga=normal # Linux bootable partition config ends title Install GRUB to floppy disk (on /dev/fd0) pause Insert a formatted floppy disk and press enter. root (hd0,2) setup (fd0) pause Press enter to continue. title Install GRUB to Linux partition (on /dev/sda3) root (hd0,2) setup (hd0,2) pause Press enter to continue. title - For help press 'c', then type: 'help' root (hd0) title - For usage examples, type: 'cat /boot/grub/usage.txt' root (hd0) |
To Me it looks like lots of partitions for a "puppy only" install. I generally use two partitions 1 as ext3, and a swap, for a puppy only box. Therefor, I do indeed use grub, install all defaults Except, I always put grub to MBR, when doing Full Installs!
Sorry I don't use cfdisk... I use GParted so I can't comment on that part! HTH at least some RP |
I did put grub into Sda1 Boot Primary FAT16 1077.52 which was the partition created by Windows and I am assuming therefore is the MBR.
Cfdisk info: Name Flags Part Type FS Type Label Size My Descriptions of each partition Unusable 131.61 a 'blank' partition to exclude (errors?) Sda1 Boot Primary FAT16 1077.52 Windows install created partition w MBR Sda4 Primary W95 FAT32 847.21 another 'blank' partition to exclude (errors?) Sda2 Primary Linux swap/ Solars 5116.13 Puppy Linux swap partition Sda3 Primary Linux ext3 54303.30 rest of disk for Puppy linux The If I am want to use only puppy Linux why do I need grub at all? Grub seems to fail no matter how many times I install and I can't find a correction. So, isn't Grub for multi-boot systems, such as Windows and/or Linux? Can I remove Grub and only install Puppy? Is there a way when running Puppy Linux to cut and paste windows so I can show what Gparted or other programs are showing? |
No, Grub (or Lilo) is the bootloader that start Linux even in a single-OS environment, and it must be placed on the MBR, not a file or even boot partition. With the Puppy installer, you select MBR from the drop-down menu on the dialog box.
|
Solved,
I just had done something to screw up grub. So all efforts to fix grub failed because each time I thought I had fixed it, the next boot w/o a CD would fail on Grub error 17. I found http://www.murga-linux.com/puppy/vie...42876&start=15 which stepped me though all the steps to use Gparted correctly and now it works as it should. I still would like to know how to do screen prints in Linux so I can get further help as I learn without typing info on another system as I look at a Linux system. So, any suggestions on next things I will need to learn to ditch Windows completely, I need Microsoft Money to do my on-line banking reconciliation. Is there a site where I can go to find equivalent programs for Linux? myhilo |
All times are GMT -5. The time now is 03:57 PM. |