LinuxQuestions.org
Page 1 of 2 1 2
Show 50 post(s) from this thread on one page

LinuxQuestions.org (/questions/)
-   Linux - Newbie (https://www.linuxquestions.org/questions/linux-newbie-8/)
-   -   problem with install linux (https://www.linuxquestions.org/questions/linux-newbie-8/problem-with-install-linux-62398/)

luucorp 05-28-2003 10:18 PM
problem with install linux
 
i have been install linux, when boot it message "Missing oprating system" with /dev/hda . i boot with FDD then don't have above message.

my HDD: 20g with 3 partion:
1.winxp (hide)
2.ext3(active)
3.extention:
+fat32
+fat32
+linux Swap

i can solve this above how?

I use FDD to boot and into KDE, how in kde config that after this time when boot dont' to use FDD

thank in avd.

Aussie 05-28-2003 10:31 PM
We need more info.
What bootloader and what distro and version would help, along with the output of "fdisk -l" and the contents of your bootloader config file.

luucorp 05-28-2003 10:45 PM
boot with grub, now i use win, fisrt guy help me how to linux redhat do with my cardmodem on pci.

i see infomation about modem at win as:
Device type: Modems
Manufacturer: Intel Corparation
Location: PCI Slot 4 (PCI bus 2, device 2, function 0)

kazuni 05-29-2003 07:04 AM
thta doesn't tell us much about your modem model either. can you be a little more specific?

jt1020 05-29-2003 10:07 AM
yes, we need more infos.... try to boot to linux and post your fstab.... and also, run cat /proc/pci and post its contents

Azmeen 05-29-2003 10:27 AM
Easiest method... boot Linux from XP's bootloader with the help of bootpart

luucorp 05-29-2003 07:36 PM
boot is ok :) thanks guys.
about modem: , i forget include 'info' about modem:
it is Intel(R) 537 Data Fax Voice V.92 Modem

luucorp 05-29-2003 11:12 PM
and problem about sound:

http://tw.giga-byte.com/MotherBoard/..._GA-8PE800.htm
mainboard that i used

wait for soon repply
thanks

luucorp 05-29-2003 11:29 PM
modem driver is download at intel:
http://downloadfinder.intel.com/scri...ProductID=1057
if anybody need.

hi Guys, help me about sound.

thanks

luucorp 05-30-2003 07:30 AM
:(, they do not do.
here detail output of cat /proc/pci
Quote:
PCI devices found:
Bus 0, device 0, function 0:
Host bridge: PCI device 8086:2560 (Intel Corp.) (rev 3).
Prefetchable 32 bit memory at 0xd0000000 [0xd7ffffff].
Bus 0, device 1, function 0:
PCI bridge: PCI device 8086:2561 (Intel Corp.) (rev 3).
Master Capable. Latency=64. Min Gnt=12.
Bus 0, device 29, function 0:
USB Controller: PCI device 8086:24c2 (Intel Corp.) (rev 1).
IRQ 11.
I/O at 0xd800 [0xd81f].
Bus 0, device 29, function 1:
USB Controller: PCI device 8086:24c4 (Intel Corp.) (rev 1).
IRQ 9.
I/O at 0xd000 [0xd01f].
Bus 0, device 29, function 2:
USB Controller: PCI device 8086:24c7 (Intel Corp.) (rev 1).
IRQ 5.
I/O at 0xd400 [0xd41f].
Bus 0, device 29, function 7:
USB Controller: PCI device 8086:24cd (Intel Corp.) (rev 1).
IRQ 11.
Non-prefetchable 32 bit memory at 0xe2100000 [0xe21003ff].
Bus 0, device 30, function 0:
PCI bridge: Intel Corp. 82820 820 (Camino 2) Chipset PCI (rev 129).
Master Capable. No bursts. Min Gnt=6.
Bus 0, device 31, function 0:
ISA bridge: PCI device 8086:24c0 (Intel Corp.) (rev 1).
Bus 0, device 31, function 1:
IDE interface: PCI device 8086:24cb (Intel Corp.) (rev 1).
IRQ 11.
I/O at 0x0 [0x7].
I/O at 0x0 [0x3].
I/O at 0x0 [0x7].
I/O at 0x0 [0x3].
I/O at 0xf000 [0xf00f].
Non-prefetchable 32 bit memory at 0x10000000 [0x100003ff].
Bus 0, device 31, function 3:
SMBus: PCI device 8086:24c3 (Intel Corp.) (rev 1).
IRQ 5.
I/O at 0x5000 [0x501f].
Bus 0, device 31, function 5:
Multimedia audio controller: PCI device 8086:24c5 (Intel Corp.) (rev 1).
IRQ 5.
I/O at 0xe000 [0xe0ff].
I/O at 0xe400 [0xe43f].
Non-prefetchable 32 bit memory at 0xe2101000 [0xe21011ff].
Non-prefetchable 32 bit memory at 0xe2102000 [0xe21020ff].
Bus 1, device 0, function 0:
VGA compatible controller: nVidia Corporation NV11 (GeForce2 MX) (rev 178).
IRQ 11.
Master Capable. Latency=32. Min Gnt=5.Max Lat=1.
Non-prefetchable 32 bit memory at 0xe0000000 [0xe0ffffff].
Prefetchable 32 bit memory at 0xd8000000 [0xdfffffff].
Bus 2, device 2, function 0:
Communication controller: Tiger Jet Network Inc. Model 300 128k (rev 0).
IRQ 9.
Master Capable. Latency=32. Min Gnt=1.Max Lat=128.
I/O at 0xc000 [0xc0ff].
Non-prefetchable 32 bit memory at 0xe2000000 [0xe2000fff].
This output of lspci -v
Quote:
00:00.0 Host bridge: Intel Corp.: Unknown device 2560 (rev 03)
Subsystem: Giga-byte Technology: Unknown device 2560
Flags: bus master, fast devsel, latency 0
Memory at d0000000 (32-bit, prefetchable) [size=128M]
Capabilities: [e4] #09 [6105]
Capabilities: [a0] AGP version 2.0

00:01.0 PCI bridge: Intel Corp.: Unknown device 2561 (rev 03) (prog-if 00 [Normal decode])
Flags: bus master, 66Mhz, fast devsel, latency 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
Memory behind bridge: e0000000-e1ffffff
Prefetchable memory behind bridge: d8000000-dfffffff

00:1d.0 USB Controller: Intel Corp.: Unknown device 24c2 (rev 01) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology: Unknown device 24c2
Flags: bus master, medium devsel, latency 0, IRQ 11
I/O ports at d800 [size=32]

00:1d.1 USB Controller: Intel Corp.: Unknown device 24c4 (rev 01) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology: Unknown device 24c2
Flags: bus master, medium devsel, latency 0, IRQ 9
I/O ports at d000 [size=32]

00:1d.2 USB Controller: Intel Corp.: Unknown device 24c7 (rev 01) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology: Unknown device 24c2
Flags: bus master, medium devsel, latency 0, IRQ 5
I/O ports at d400 [size=32]

00:1d.7 USB Controller: Intel Corp.: Unknown device 24cd (rev 01) (prog-if 20 [EHCI])
Subsystem: Giga-byte Technology: Unknown device 5004
Flags: bus master, medium devsel, latency 0, IRQ 11
Memory at e2100000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2

00:1e.0 PCI bridge: Intel Corp. 82801BA/CA PCI Bridge (rev 81) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: e2000000-e20fffff

00:1f.0 ISA bridge: Intel Corp.: Unknown device 24c0 (rev 01)
Flags: bus master, medium devsel, latency 0

00:1f.1 IDE interface: Intel Corp.: Unknown device 24cb (rev 01) (prog-if 8a [Master SecP PriP])
Subsystem: Giga-byte Technology: Unknown device 24c2
Flags: bus master, medium devsel, latency 0, IRQ 11
I/O ports at <unassigned> [size=8]
I/O ports at <unassigned> [size=4]
I/O ports at <unassigned> [size=8]
I/O ports at <unassigned> [size=4]
I/O ports at f000 [size=16]
Memory at 10000000 (32-bit, non-prefetchable) [size=1K]

00:1f.3 SMBus: Intel Corp.: Unknown device 24c3 (rev 01)
Subsystem: Giga-byte Technology: Unknown device 24c2
Flags: medium devsel, IRQ 5
I/O ports at 5000 [size=32]

00:1f.5 Multimedia audio controller: Intel Corp.: Unknown device 24c5 (rev 01)
Subsystem: Giga-byte Technology: Unknown device a002
Flags: bus master, medium devsel, latency 0, IRQ 5
I/O ports at e000 [size=256]
I/O ports at e400 [size=64]
Memory at e2101000 (32-bit, non-prefetchable) [size=512]
Memory at e2102000 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2

01:00.0 VGA compatible controller: nVidia Corporation NV11 [GeForce2 MX] (rev b2) (prog-if 00 [VGA])
Subsystem: Micro-star International Co Ltd: Unknown device 8817
Flags: bus master, 66Mhz, medium devsel, latency 32, IRQ 11
Memory at e0000000 (32-bit, non-prefetchable) [size=16M]
Memory at d8000000 (32-bit, prefetchable) [size=128M]
Expansion ROM at <unassigned> [disabled] [size=64K]
Capabilities: [60] Power Management version 2
Capabilities: [44] AGP version 2.0

02:02.0 Communication controller: Tiger Jet Network Inc. Model 300 128k
Subsystem: Intel Corp.: Unknown device 0003
Flags: bus master, medium devsel, latency 32, IRQ 9
I/O ports at c000 [size=256]
Memory at e2000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
plz help me, how they work.
thanks

luucorp 05-30-2003 07:18 PM
may you help me?

genghis 06-11-2003 08:04 AM
does the modem (intel 537 data fax voice modem )
work in linux??? (redhat 9.0 preferably)
with the driver at
http://downloadfinder.intel.com/scr...&ProductID=1057

please post response.

genghis 06-12-2003 08:31 AM
i get this error when i try to install the drivers on redhat 9.0

[root@localhost Intel-v92ham-453]# make clean
cd coredrv; make clean
make[1]: Entering directory `/root/modem/Intel-v92ham-453/coredrv'
rm -f *.o *~ core
make[1]: Leaving directory `/root/modem/Intel-v92ham-453/coredrv'
cd serialdrv; make clean
make[1]: Entering directory `/root/modem/Intel-v92ham-453/serialdrv'
rm -f *.o *~ core
make[1]: Leaving directory `/root/modem/Intel-v92ham-453/serialdrv'
rm -f *.o
rm -f *.o
[root@localhost Intel-v92ham-453]# make ham
Module precompile check
Current running kernel is: 2.4.20-8
/lib/modules... autoconf.h does not exist
please install kernel source
make: *** [check] Error 1
[root@localhost Intel-v92ham-453]# make install
bash haminst
running kernel 2.4.20-8
installing hamregistry, used for persistant storage
installing ham module
install: cannot stat `ham.o': No such file or directory
installing hamcore module
install: cannot stat `hamcore.o': No such file or directory
redhat hamboot rc2.d and rc3.d scripts
starting module and utilities
error loading hamcore
done
[root@localhost Intel-v92ham-453]#

chakkerz 06-12-2003 08:38 AM
Quote:
root@localhost Intel-v92ham-453]# make ham
Module precompile check
Current running kernel is: 2.4.20-8
/lib/modules... autoconf.h does not exist
please install kernel source
you don't seem to have the kernel sources installed.

francesconuma 09-16-2003 12:32 PM
(Mandrake 9.1)
I've your problem too!!
I tried to install kernell source but i can't compile the drivers!!
The make file try to copy files in non existing folders.....
If you can solve the problem please notify me....
P:S: Sorry for bad english

Francesco Umani


All times are GMT -5. The time now is 10:12 AM.
Page 1 of 2 1 2
Show 50 post(s) from this thread on one page