Printing from HP-UX 10.2 to a Lexmark e450dn through a Debian etch print server
I got this problem and need all the help i can get.
I got this Lexmark E450dn printer, i need to print to it from an HP-UX application. Problem is i have HP-UX 10.2 installed on my server and there are no 10.2 drivers from Lexmark for this printer.....only HP-UX 11.0 and later is supported. so i thought of setting up a linux print server, add the Lexmark to it, then share it across the network so i can add it as a remote printer in HP-UX 10.2 and be able to print to it. I've already got Debian etch installed on a box, got the printer installed and printing fine, got CUPS server running and printing test pages to the lexmark fine. My problem now is : How do i get the HP-UX server to print to the lexmark now ?? how to configure CUPS on it ? |
10.20 is ancient in HP-UX terms.
Default tool for printing in HP-UX is JetAdmin (later rebranded as HPNP). This didn't use "drivers" so much as "models". If you got a "model" for HP-UX 11.x chances are you can make it available in your HP-UX 10.20 system. I haven't really done any HP-UX to Linux printing mainly because I'm using JetAdmin/HPNP on all but one environment which IS running 10.20 but there we use CEPS rather than CUPS. Not a lot of support here for HP-UX. You might want to post on itrc.hp.com or on the Dutchworks mailing list. Information for the Dutchworks list: ---> Please post QUESTIONS and SUMMARIES only!! <--- To subscribe/unsubscribe to this list, contact majordomo@dutchworks.nl Name: hpux-admin@dutchworks.nl Owner: owner-hpux-admin@dutchworks.nl Archives: ftp.dutchworks.nl:/pub/digests/hpux-admin (FTP, browse only) http://www.dutchworks.nl/htbin/hpsysadmin (Web, browse & search) |
Ahmed,
I'm not an expert, but are you trying to configure your printer on HP-UX with the standard SystemV print subsystem? If so, you should be able to either create a remote queue with SAM or I believe that you should be able to use an HP-UX 10.2 package for an older Lexmark mono product, using MVPrint(aka lexprt). Here's a link to a relevant product. downloads.lexmark.com/cgi-perl/downloads.cgi?ccs=229:1:0:361:0:0&emeaframe=&fileID=886&searchLang=en&os_group=HPUX Since HP-UX 10.2 does not include CUPS, I would need to know more about your configuration and expectations in order to give you an adequate response there. Regards |
All times are GMT -5. The time now is 06:43 PM. |