|
Partition Table Does Not Exist on Device
Hello,
I'm using the Control4 system in my home. The controller (EA-5 v1) for the system is running a linux flavored OS. The boot files is on a eMMC chip. Based on the screenshot below, it looks like partition 1 is invalid. How can I recreate or repair partition 1 without losing data. I can provide more information if you need it. **** ~ # fdisk -l fdisk -l Disk /dev/mtdblock0: 16 MB, 16777216 bytes, 32768 sectors 2 cylinders, 255 heads, 63 sectors/track Units: cylinders of 16065 * 512 = 8225280 bytes Disk /dev/mtdblock0 doesn't contain a valid partition table Disk /dev/mmcblk0: 7456 MB, 7818182656 bytes, 15269888 sectors 238592 cylinders, 4 heads, 16 sectors/track Units: cylinders of 64 * 512 = 32768 bytes Device Boot StartCHS EndCHS StartLBA EndLBA Sectors Size Id Type /dev/mmcblk0p1 1023,3,16 1023,3,16 65536 12648448 12582913 6144M 83 Linux /dev/mmcblk0p2 1023,3,16 1023,3,16 12648449 14745601 2097153 1024M 83 Linux /dev/mmcblk0p3 1023,3,16 1023,3,16 14745602 14811138 65537 32.0M 83 Linux Disk /dev/mmcblk0boot1: 2 MB, 2097152 bytes, 4096 sectors 64 cylinders, 4 heads, 16 sectors/track Units: cylinders of 64 * 512 = 32768 bytes Disk /dev/mmcblk0boot1 doesn't contain a valid partition table Disk /dev/mmcblk0boot0: 2 MB, 2097152 bytes, 4096 sectors 64 cylinders, 4 heads, 16 sectors/track Units: cylinders of 64 * 512 = 32768 bytes Disk /dev/mmcblk0boot0 doesn't contain a valid partition table |
More information...
~ # df df Filesystem 1K-blocks Used Available Use% Mounted on none 797060 0 797060 0% /dev |
More information...
~ # blkid blkid /dev/mmcblk0p3: LABEL="logs" UUID="d51c4f67-c604-48ec-a907-6e43b6e90c66" TYPE="ext4" /dev/mmcblk0p2: LABEL="recfs" UUID="a61f4144-f1b8-4592-8fae-28b98ef25d3e" TYPE="ext4" /dev/mmcblk0p1: LABEL="rootfs" UUID="3e4763da-1389-4e93-9d41-7e6d3f4c88f9" TYPE="ext4" ~ # |
This is the errors I'm getting when booting up the Control4 EA-5 Controller...
[*] Creating base directories for init fs ... Set System Time From RTC [ 6.455383] rtc-ds1307 0-0068: rtc core: registered ds1339 as rtc0 [ 6.462299] i2c i2c-0: new_device: Instantiated device ds1339 at 0x68 Date is now Sat Mar 20 22:46:01 UTC 2021[*] Executing Normal Boot Process![*] Checking ext4 filesystem /dev/mmcblk0p1... rootfs: recovering journal rootfs: clean, 19702/393216 files, 385858/1572864 blocks[*] Checking ext4 filesystem /dev/mmcblk0p2... recfs: clean, 14/65536 files, 114875/262144 blocks[*] Checking ext4 filesystem /dev/mmcblk0p3... logs: clean, 29/8192 files, 10076/32768 blocks[*] Mounting /rootfs read-only...[*] Executing Mount Command[ 6.614091] EXT4-fs (mmcblk0p1): barriers disabled : "mount -t ext4 -o rw,discard,noatime,data=ordered,nobarrier /d[ 6.623313] EXT4-fs (mmcblk0p1): mounting with "discard" option, but the device does not support discard ev/mmcblk0p1 /rootfs" [ 6.636817] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: discard,data=ordered,nobarrier[*] Switching / to /rootfs mount: mounting /sys on /rootfs/sys failed: No such file or directory mount: mounting /proc on /rootfs/proc failed: No such file or directory mount: mounting /dev on /rootfs/dev failed: No such file or directory[*] Executing exec switch_root /rootfs /sbin/init switch_root: can't execute '/sbin/init': No such file or directory [ 6.685056] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000100 [ 6.685056] [ 6.694166] CPU: 3 PID: 1 Comm: switch_root Not tainted 3.12.74 #139-8e8c0f87-ninjago.1 [ 6.702135] 00000000 c15f47c9 c17df060 d8df96f4 c15f14c3 c170de54 c1bd9700 c17df060 [ 6.709839] d8df96f4 d9450000 d9450000 c1039a28 c170e0bc 00000100 00000043 d9079710 [ 6.717546] 00000002 c10f63e5 00000001 00000001 00000000 d96939c8 d94501d8 d9459f80 [ 6.725253] Call Trace: [ 6.727691] [<c15f47c9>] ? dump_stack+0x44/0x57 [ 6.732292] [<c15f14c3>] ? panic+0x7d/0x16c [ 6.736543] [<c1039a28>] ? do_exit+0x798/0x8a0 [ 6.741052] [<c10f63e5>] ? vfs_write+0x105/0x190 [ 6.745736] [<c1039b8a>] ? do_group_exit+0x2a/0x80 [ 6.750593] [<c1039bef>] ? SyS_exit_group+0xf/0x10 [ 6.755452] [<c15faafc>] ? syscall_call+0x7/0x7 |
You can have a filesystem without wrapping it into partition table, you need partitioning only if there is more than one filesystem.
|
Quote:
I don't have an option. Is Partition 1 corrupt? How can I repair Partition 1? Maybe the eMMC chip is bad as well. |
More information.. Trying to run the init program on the system and it's failing..
~ # ./init ./init mount: mounting none on /sys failed: Device or resource busy mount: mounting none on /proc failed: Device or resource busy mount: mounting none on /dev failed: Device or resource busy mount: mounting none on /dev/pts failed: Device or resource busy Type 'c4' followed by [ENTER] within the next 2 seconds to stop boot and break into initramfs. Terminated[*] Creating base directories for init fs ... Set System Time From RTC [ 56.268566] rtc-ds1307 0-0068: rtc core: registered ds1339 as rtc0 [ 56.275491] i2c i2c-0: new_device: Instantiated device ds1339 at 0x68 Date is now Sat Mar 20 23:18:01 UTC 2021[*] Executing Normal Boot Process![*] Checking ext4 filesystem /dev/mmcblk0p1... /usr/sbin/fsck.ext4: Superblock invalid, trying backup blocks... The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it really contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternate superblock: e2fsck -b 8193 <device> [*] Appears there was an error fscking the rootfs filesystem...[*] Checking ext4 filesystem /dev/mmcblk0p2... /usr/sbin/fsck.ext4: Superblock invalid, trying backup blocks... The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it really contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternate superblock: e2fsck -b 8193 <device> [*] Appears there was an error fscking the recovery filesystem...[*] Checking ext4 filesystem /dev/mmcblk0p3... /usr/sbin/fsck.ext4: Superblock invalid, trying backup blocks... The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it really contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternate superblock: e2fsck -b 8193 <device> [*] Appears there was an error fscking the persistent logs filesystem...[*] Mounting /rootfs read-only...[*] Executing Mount Command: "mount -t ext4 -o rw,discard,noatime,data=ordered,nobarrier /dev/mmcblk0p1 /rootfs" mount: mounting /dev/mmcblk0p1 on /rootfs failed: Invalid argument /init failed: failed to mount /rootfs read-only ERROR! Dropping to a shell BusyBox v1.27.1 (2020-05-19 20:39:20 MDT) built-in shell (ash) Enter 'help' for a list of built-in commands. /bin/sh: can't access tty; job control turned off ~ # |
Files on the system...
~ # ls ls bin etc proc tmp check_input.sh init recovery_boot usr common_initramfs lib root var control4 mfg_prog rootfs dev mnt sbin dev_prog_boot normal_boot sys |
How many block devices is there?
Code:
/dev/mtdblock0: 16 MB, 16777216 bytes, 32768 sectors |
is there a /etc/fstab and if so post the contents.
|
eMMC (for u-boot) are an entirely different animal to what we are used to in the real world. I did look into it a while back, but couldn't get it straight since I don't have such a system to play on.
Normally recreating a partition table is trivial, but I'm not prepared to suggest anything here. |
So far I see partition table only in one device, and it is not damaged. The title of this thread is misleading at least.
|
Quote:
Please let me know what other logs to post to help in troubleshooting. |
No need to be sorry. I have no clue what we are facing here myself, no experience with such a device. What I would do is I'd try and mount these filesystems one by one to understand their purpose, looking at their contents. It always helps if you understand how the device works.
Is there a known reason for this failure, like blown power supply or ... ? Or it just started malfunctioning out of blue? In case some files are damaged and/or even lost, do you have a source where to get this OS from when you need to replace it? |
Quote:
/sys /sys sysfs defaults devtmpfs /dev devtmpfs defaults ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ - fstab 1/5 20% |
| All times are GMT -5. The time now is 02:25 PM. |