Hello all I'm having some difficulty installing Oracle 11gR2 on RHEL 6.2 I have compiled a giant list of every single step I have taken so far I installed RHEL 6.2 on VMWARE it did it's easy install automatically I Selected 4gb of memory Selected max size of 80Gb Selected 2 processors
I have done alot of googling in advance and beleive I have fixed alot of the common problems people have when they get this Java:132 error (such as doing su - then su - oracle and trying to install) but I'm still having problems
The version of oracle i downloaded is Linux x86-64 11.2.0.1 I am installing this on a local machine NOT a remote machine
I followed the following documentation
http://docs.oracle.com/cd/E11882_01/...e24326/toc.htm
I selected the following prerequisites for my VMWARE machine (should be irrelevant because I have tried different selections and gotten the same error)
4gb of memory
max size of 80Gb
2 processors
The version of oracle i downloaded is Linux x86-64 11.2.0.1
I am installing this on a local machine NOT a remote machine
1. Easy installed with RHEL 6.2 for VMWARE
2. Registered with red hat so I can get updates
3. Reinstalled vmware-tools by pressing enter at every choice
4. Sudo yum update at the end something about GPG key selected y then y
5. Checked Memory Requirements
grep MemTotal /proc/meminfo
MemTotal: 3921368 kb
uname -m
x86_64
grep SwapTotal /proc/meminfo
SwapTotal: 6160376 kb
free
total used free shared buffers cached
Mem: 3921368 2032012 1889356 0 76216 1533268
-/+ buffers/cache: 422528 3498840
Swap: 6160376 0 6160376
df -h /dev/shm
Filesystem Size Used Avail Use% Mounted on
tmpfs 1.9G 276K 1.9G 1% /dev/shm
df -h /tmp
Filesystem Size Used Avail Use% Mounted on
/dev/sda2 73G 2.7G 67G 4% /
df -h
Filesystem Size Used Avail Use% Mounted on
/dev/sda2 73G 2.7G 67G 4% /
tmpfs 1.9G 276K 1.9G 1% /dev/shm
/dev/sda1 291M 58M 219M 21% /boot
All looked fine to me except maybe for swap?
6. Software Requirements
cat /proc/version
Linux version 2.6.32-220.el6.x86_64 (mockbuild@x86-004.build.bos.redhat.com) (gcc version 4.4.5 20110214 (Red Hat 4.4.5-6) (GCC) ) #1 SMP Wed Nov 9 08:03:13 EST 2011
uname -r
2.6.32-220.el6.x86_64
(same as above but whatever)
According to the tutorial should be
On Red Hat Enterprise Linux 6
2.6.32-71.el6.x86_64 or later
7. These are the versions of software I have installed
binutils-2.20.51.0.2-5.28.el6.x86_64
compat-libcap1-1.10-1.x86_64
compat-libstdc++-33-3.2.3-69.el6.x86_64
compat-libstdc++-33.i686 0:3.2.3-69.el6
gcc-4.4.6-3.el6.x86_64
gcc-c++.x86_64 0:4.4.6-3.el6
glibc-2.12-1.47.el6_2.12.x86_64
glibc-2.12-1.47.el6_2.12.i686
glibc-devel-2.12-1.47.el6_2.12.x86_64
glibc-devel.i686 0:2.12-1.47.el6_2.12
ksh.x86_64 0:20100621-12.el6_2.1
libgcc-4.4.6-3.el6.x86_64
libgcc-4.4.6-3.el6.i686
libstdc++-4.4.6-3.el6.x86_64
libstdc++.i686 0:4.4.6-3.el6
libstdc++-devel.i686 0:4.4.6-3.el6
libstdc++-devel-4.4.6-3.el6.x86_64
libaio-0.3.107-10.el6.x86_64
libaio-0.3.107-10.el6.i686
libaio-devel-0.3.107-10.el6.x86_64
libaio-devel-0.3.107-10.el6.i686
make-3.81-19.el6.x86_64
sysstat-9.0.4-18.el6.x86_64
unixODBC-2.2.14-11.el6.x86_64
unixODBC-devel-2.2.14-11.el6.x86_64
unixODBC-devel-2.2.14-11.el6.i686
unixODBC-2.2.14-11.el6.i686
8. Probably messed up here or step 9
/usr/sbin/groupadd oinstall
/usr/sbin/groupadd dba(not sure why this isn't in the tutorial)
/usr/sbin/useradd -g oinstall -G dba oracle
passwd oracle
/sbin/sysctl -a | grep sem
Xkernel.sem = 250 32000 32 128
/sbin/sysctl -a | grep shm
kernel.shmmax = 68719476736
kernel.shmall = 4294967296
kernel.shmmni = 4096
vm.hugetlb_shm_group = 0
/sbin/sysctl -a | grep file-max
Xfs.file-max = 384629
/sbin/sysctl -a | grep ip_local_port_range
Xnet.ipv4.ip_local_port_range = 32768 61000
/sbin/sysctl -a | grep rmem_default
Xnet.core.rmem_default = 124928
/sbin/sysctl -a | grep rmem_max
Xnet.core.rmem_max = 131071
/sbin/sysctl -a | grep wmem_max
Xnet.core.wmem_max = 131071
/sbin/sysctl -a | grep wmem_default
Xnet.core.wmem_default = 124928
Here is my sysctl.conf file I only added the items that were bigger:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
# Kernel sysctl configuration file for Red Hat Linux
#
# For binary values, 0 is disabled, 1 is enabled. See sysctl(8) and
# sysctl.conf(5) for more details.
# Controls IP packet forwarding
net.ipv4.ip_forward = 0
# Controls source route verification
net.ipv4.conf.default.rp_filter = 1
# Do not accept source routing
net.ipv4.conf.default.accept_source_route = 0
# Controls the System Request debugging functionality of the kernel
kernel.sysrq = 0
# Controls whether core dumps will append the PID to the core filename.
# Useful for debugging multi-threaded applications.
kernel.core_uses_pid = 1
# Controls the use of TCP syncookies
net.ipv4.tcp_syncookies = 1
# Disable netfilter on bridges.
net.bridge.bridge-nf-call-ip6tables = 0
net.bridge.bridge-nf-call-iptables = 0
net.bridge.bridge-nf-call-arptables = 0
# Controls the maximum size of a message, in bytes
kernel.msgmnb = 65536
# Controls the default maxmimum size of a mesage queue
kernel.msgmax = 65536
# Controls the maximum shared segment size, in bytes
kernel.shmmax = 68719476736
# Controls the maximum number of shared memory segments, in pages
kernel.shmall = 4294967296
fs.aio-max-nr = 1048576
fs.file-max = 6815744
kernel.sem = 250 32000 100 128
net.ipv4.ip_local_port_range = 9000 65500
net.core.rmem_default = 262144
net.core.rmem_max = 4194304
net.core.wmem_default = 262144
net.core.wmem_max = 1048576
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
/sbin/sysctl -p
net.ipv4.ip_forward = 0
net.ipv4.conf.default.rp_filter = 1
net.ipv4.conf.default.accept_source_route = 0
kernel.sysrq = 0
kernel.core_uses_pid = 1
net.ipv4.tcp_syncookies = 1
error: "net.bridge.bridge-nf-call-ip6tables" is an unknown key
error: "net.bridge.bridge-nf-call-iptables" is an unknown key
error: "net.bridge.bridge-nf-call-arptables" is an unknown key
kernel.msgmnb = 65536
kernel.msgmax = 65536
kernel.shmmax = 68719476736
kernel.shmall = 4294967296
fs.aio-max-nr = 1048576
fs.file-max = 6815744
kernel.sem = 250 32000 100 128
net.ipv4.ip_local_port_range = 9000 65500
net.core.rmem_default = 262144
net.core.rmem_max = 4194304
net.core.wmem_default = 262144
net.core.wmem_max = 1048576
su - oracle
ulimit -Sn
1024
ulimit -Hn
1024
ulimit -Su
1024
ulimit -Hu
30482
ulimit -Su
1024
ulimit -Ss
10240
ulimit -Hs
unlimited
su -
nano /etc/security/limits.conf
added to the end of the file (no >>>> in the actual file)
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
oracle soft nproc 2047
oracle hard nproc 16384
oracle soft nofile 1024
oracle hard nofile 65536
oracle soft stack 10240
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
exit
exit
su -
mkdir -p /app/
chown -R oracle
install /app/
chmod -R 775 /app/
9. THIS IS PROBABLY WHERE I MESSED UP
I then exited out of the root account so now I'm back in my account chris then I
su - oracle
echo $SHELL
/bin/bash
umask
0022 (so it should be set already to what is neccesary)
Also from what I have read I do not need to set the DISPLAY variable because I'm installing this on the localhost
I then opened the .bash_profile of the oracle and changed it to the following
# .bash_profile
# Get the aliases and functions
if [ -f ~/.bashrc ]; then
. ~/.bashrc
fi
# User specific environment and startup programs
PATH=$PATH:$HOME/bin; export PATH
ORACLE_BASE=/app/oracle
ORACLE_SID=orcl
export ORACLE_BASE ORACLE_SID
I then shutdown the virtual machine shared my desktop folder from my windows 7 then turned back on the virtual machine logged in as chris opened up a terminal then:
su -
for some reason the shared folder didn't appear so I reinstalled vmware tools again and restarted
then same as before
su -
cp -R linux_oracle/database /db; chown -R oracle
install /db; chmod -R 775 /db; ll /db
drwxrwxr-x. 8 oracle oinstall 4096 Jun 5 06:20 database
exit
su - oracle
cd /db/database
./runInstaller
AND FINALLY THE INFAMOUS JAVA:132 ERROR MESSAGE
Starting Oracle Universal Installer...
Checking Temp space: must be greater than 80 MB. Actual 65646 MB Passed
Checking swap space: must be greater than 150 MB. Actual 6015 MB Passed
Checking monitor: must be configured to display at least 256 colors. Actual 16777216 Passed
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2012-06-05_06-47-12AM. Please wait ...[oracle@localhost database]$ Exception in thread "main" java.lang.UnsatisfiedLinkError: /tmp/OraInstall2012-06-05_06-47-12AM/jdk/jre/lib/i386/xawt/libmawt.so: libXext.so.6: cannot open shared object file: No such file or directory
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1751)
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1647)
at java.lang.Runtime.load0(Runtime.java:769)
at java.lang.System.load(System.java:968)
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1751)
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1668)
at java.lang.Runtime.loadLibrary0(Runtime.java:822)
at java.lang.System.loadLibrary(System.java:993)
at sun.security.action.LoadLibraryAction.run(LoadLibraryAction.java:50)
at java.security.AccessController.doPrivileged(Native Method)
at java.awt.Toolkit.loadLibraries(Toolkit.java:1509)
at java.awt.Toolkit.<clinit>(Toolkit.java:1530)
at com.jgoodies.looks.LookUtils.isLowResolution(Unknown Source)
at com.jgoodies.looks.LookUtils.<clinit>(Unknown Source)
at com.jgoodies.looks.plastic.PlasticLookAndFeel.<clinit>(PlasticLookAndFeel.java:122)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:242)
at javax.swing.SwingUtilities.loadSystemClass(SwingUtilities.java:1783)
at javax.swing.UIManager.setLookAndFeel(UIManager.java:480)
at oracle.install.commons.util.Application.startup(Application.java:758)
at oracle.install.commons.flow.FlowApplication.startup(FlowApplication.java:164)
at oracle.install.commons.flow.FlowApplication.startup(FlowApplication.java:181)
at oracle.install.commons.base.driver.common.Installer.startup(Installer.java:265)
at oracle.install.ivw.db.driver.DBInstaller.startup(DBInstaller.java:114)
at oracle.install.ivw.db.driver.DBInstaller.main(DBInstaller.java:132)
