OpenGeu 8.10 Frustrations!
 

All righty now, I am going to first copy down the code that tells you the story....

BraseroWodim process finished with status 255
BraseroWodim called brasero_job_error
BraseroWodim finished with an error
BraseroWodim asked to stop because of an error
error = 0
message = "no message"
BraseroGenisoimage stopping
BraseroGenisoimage got killed
BraseroGenisoimage disconnecting BraseroGenisoimage from BraseroChecksumImage
BraseroChecksumImage stopping
BraseroChecksumImage disconnecting BraseroChecksumImage from BraseroWodim
BraseroChecksumImage closing connection for BraseroChecksumImage
BraseroWodim stopping
BraseroWodim got killed
BraseroWodim closing connection for BraseroWodim
Session error : unknown (brasero_burn_record burn.c:2527)

I've received this message 6 TIMES. I downloaded the torrent from the OpenGeu site. I double checked my burn settings... I've been looking for the source code...

The reason why I am downloading this is because I really liked enlightenment and I though I would try this new OS... but It won't even copy to a CD-RW (700 mib) so I can't even get frustrated with the rest of it!!

Why is this happening!?!

You've downloaded the torrent or the actual iso file? How big is the file you downloaded?
jdk

The opengeu-8.10-desktop-i386.iso is 687 MB
and can be downloaded from 'http' here
http://download.linux-live-cd.org/iso/OpenGEU/

An iso file will not work, when you copy it to cdrom.

It must be "burned as an image" !
.....

more OpenGeu8.10 anger!
 

Okay...

for knudfl

I burned it as an image, and got the same result. I am about to just do it manually. I WANT OPENGEU!!!!!

I will do it again though.

for jdkaye


I downloaded the torrent, it is 686.6 mib.
I also, earlier today on WinXP downloaded the package from Softpedia, same problem... different lingo.

I wrote it as an image and then (once it was 'recordable') attempted to burn it to the disk... check this out... maybe I am just stoopid.




BraseroWodim stderr: wodim: No write mode specified.
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: wodim: Asuming -tao mode.
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: wodim: Future versions of wodim may have different drive dependent defaults.
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits.scsidev: '/dev/scd0'
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: devname: '/dev/scd0'
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: scsibus: -2 target: -2 lun: -2
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: Linux sg driver version: 3.5.27
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: Wodim version: 1.1.8
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: SCSI buffer size: 64512
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: communication breaks or freezes immediately after that.
BraseroWodim called brasero_job_get_flags
BraseroWodim stdout: TOC Type: 1 = CD-ROM
BraseroWodim stdout: Driveropts: 'burnfree'
BraseroWodim stdout: Device type : Removable CD-ROM
BraseroWodim stdout: Version : 5
BraseroWodim stdout: Response Format: 2
BraseroWodim stdout: Capabilities :
BraseroWodim stdout: Vendor_info : 'MATSHITA'
BraseroWodim stdout: Identification : 'UJDA330 '
BraseroWodim stdout: Revision : '1.05'
BraseroWodim stdout: Device seems to be: Generic mmc CD-RW.
BraseroWodim stdout: Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
BraseroWodim stdout: Driver flags : MMC SWABAUDIO
BraseroWodim stdout: Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R
BraseroWodim stdout: Drive buf size : 1359872 = 1328 KB
BraseroWodim stdout: FIFO size : 16777216 = 16384 KB
BraseroWodim stderr: Speed set to 706 KB/s
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: wodim: Trying to use high speed medium on low speed writer.
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: wodim: fifo had 18 puts and 0 gets.
BraseroWodim called brasero_job_get_flags
BraseroWodim stdout: Track 01: data 687 MB
BraseroWodim stderr: wodim: fifo was 0 times empty and 0 times full, min fill was 0%.
BraseroWodim called brasero_job_get_flags
BraseroWodim stdout: Total size: 789 MB (78:11.98) = 351899 sectors
BraseroWodim stderr: HUP
BraseroWodim stdout: Lout start: 789 MB (78:13/74) = 351899 sectors
BraseroWodim stdout: Current Secsize: 2048
BraseroWodim stdout: ATIP info from disk:
BraseroWodim stdout: Indicated writing power: 3
BraseroWodim stdout: Reference speed: 6
BraseroWodim stdout: Is not unrestricted
BraseroWodim stdout: Is erasable
BraseroWodim stdout: Disk sub type: High speed Rewritable (CAV) media (1)
BraseroWodim stdout: ATIP start of lead in: -11635 (97:26/65)
BraseroWodim stdout: ATIP start of lead out: 359849 (79:59/74)
BraseroWodim stdout: 1T speed low: 4 1T speed high: 10
BraseroWodim stdout: power mult factor: 1 5
BraseroWodim stdout: recommended erase/write power: 3
BraseroWodim stdout: A1 values: 24 1A BC
BraseroWodim stdout: A2 values: 00 00 00
BraseroWodim stdout: Disk type: Phase change
BraseroWodim stdout: Manuf. index: 3
BraseroWodim stdout: Manufacturer: CMC Magnetics Corporation
BraseroWodim stdout: Blocks total: 359849 Blocks current: 359849 Blocks remaining: 7950
BraseroWodim stdout: HUP
BraseroWodim process finished with status 255
BraseroWodim called brasero_job_error
BraseroWodim finished with an error
BraseroWodim asked to stop because of an error
error = 0
message = "no message"
BraseroWodim stopping
BraseroWodim got killed
Session error : unknown (brasero_burn_record burn.c:2527)

A bug in 'brasero' ? ?

Try using another application, if possible.

.....

Command line ...
http://sharkysoft.com/tutorials/linuxtips/cdcommands/
" Writing an ISO to a CD-ROM using cdrecord "
( cdrecord -v -pad speed=1 dev=0,0,0 <file.iso> )

or
http://www.linuxquestions.org/questi...record-643827/
.....