| sharonm |
07-12-2010 03:19 AM |
newbie needs help with yum install /pirut.
Hi everyone,
ive been using linpus lite on an AAO netbook for over a year.. up till now Ive never actually had to do a lot with the system as I only use the netbook for going online. however I now want to update /upgrade the system and am running in to several problems that I just cant seem to make head nor tail of. Ive tried googling and following instructions ive found to make the updates work - ive tried to run live update from my settings screen on the desktop, ive tried running pirut, ive tried yum install from a terminal... I keep coming up with what seems like never ending error performing checksum and trying other mirrors....
what I finally want to do is install ndiswrapper or similar so I can use a wireless network adaptor and thought if i let the system update it would be easy to do following instructions i found online - I enjoy a challenge as much as the enxt person but Ive been trying for ages now and cannot do a thing!
here is some info that may help you help me!
Code:
[user@localhost ~]$ sudo su
[root@localhost user]# uname -a
Linux localhost 2.6.23.9lw #105 SMP PREEMPT Fri Jun 27 18:56:59 EDT 2008 i686 i686 i386 GNU/Linux
[root@localhost user]#
Code:
[user@localhost ~]$ lspci
00:00.0 Host bridge: Intel 945GME Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel 945GME Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)
00:1b.0 Audio device: Intel 82801G (ICH7 Family) HD Audio Controller: Realtek ALC662G/268 (rev 02)
00:1c.0 PCI bridge: Intel 82801G (ICH7 Family) PCI Express Port 1 (rev 02)
00:1c.2 PCI bridge: Intel 82801G (ICH7 Family) PCI Express Port 3 (rev 02)
00:1c.3 PCI bridge: Intel 82801G (ICH7 Family) PCI Express Port 4 (rev 02)
00:1d.0 USB Controller: Intel 82801G (ICH7 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel 82801G (ICH7 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel 82801G (ICH7 Family) USB UHCI Controller #3 (rev 02)
00:1d.3 USB Controller: Intel 82801G (ICH7 Family) USB UHCI Controller #4 (rev 02)
00:1d.7 USB Controller: Intel 82801G (ICH7 Family) USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
00:1f.2 IDE interface: Intel 82801GBM/GHM (ICH7 Family) SATA IDE Controller (rev 02)
00:1f.3 SMBus: Intel 82801G (ICH7 Family) SMBus Controller (rev 02)
02:00.0 Ethernet controller: Atheros AR5006EG 802.11 b/g Wireless PCI Express Adapter (rev 01)
[user@localhost ~]$
Code:
[user@localhost ~]$ dmesg
Linux version 2.6.23.9lw (root@localhost.localdomain) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #105 SMP PREEMPT Fri Jun 27 18:56:59 EDT 2008
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001f376000 (usable)
BIOS-e820: 000000001f376000 - 000000001f3bf000 (reserved)
BIOS-e820: 000000001f3bf000 - 000000001f46d000 (usable)
BIOS-e820: 000000001f46d000 - 000000001f4bf000 (ACPI NVS)
BIOS-e820: 000000001f4bf000 - 000000001f4f0000 (usable)
BIOS-e820: 000000001f4f0000 - 000000001f4ff000 (ACPI data)
BIOS-e820: 000000001f4ff000 - 000000001f500000 (usable)
BIOS-e820: 000000001f500000 - 0000000020000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
501MB LOWMEM available.
Entering add_active_range(0, 0, 128256) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 128256
HighMem 128256 -> 128256
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0 -> 128256
On node 0 totalpages: 128256
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 970 pages used for memmap
Normal zone: 123190 pages, LIFO batch:31
HighMem zone: 0 pages used for memmap
Movable zone: 0 pages used for memmap
DMI 2.4 present.
ACPI: RSDP 000FE020, 0024 (r2 INTEL )
ACPI: XSDT 1F4FE120, 0064 (r1 INTEL Napa 1 1000013)
ACPI: FACP 1F4FC000, 00F4 (r4 INTEL Napa 1 MSFT 1000013)
ACPI: DSDT 1F4F2000, 5DE6 (r1 INTEL Napa 1 MSFT 1000013)
ACPI: FACS 1F488000, 0040
ACPI: SSDT 1F4FD000, 04C4 (r2 PmRef CpuPm 3000 INTL 20051117)
ACPI: HPET 1F4FB000, 0038 (r1 INTEL Napa 1 MSFT 1000013)
ACPI: APIC 1F4FA000, 0068 (r2 INTEL Napa 1 MSFT 1000013)
ACPI: MCFG 1F4F9000, 003C (r1 INTEL Napa 1 MSFT 1000013)
ACPI: ASF! 1F4F8000, 00A5 (r32 INTEL Napa 1 MSFT 1000013)
ACPI: SLIC 1F4F1000, 0180 (r1 INTEL Napa 1 MSFT 1000013)
ACPI: BOOT 1F4F0000, 0028 (r1 INTEL Napa 1 MSFT 1000013)
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 7:12 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 7:12 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 30000000 (gap: 20000000:c0000000)
swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000
swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000
swsusp: Registered nosave memory region: 000000001f376000 - 000000001f3bf000
swsusp: Registered nosave memory region: 000000001f46d000 - 000000001f4bf000
swsusp: Registered nosave memory region: 000000001f4f0000 - 000000001f4ff000
Built 1 zonelists in Zone order. Total pages: 127254
Kernel command line: ro root=LABEL=linpus vga=0x311 splash=silent loglevel=1 console=tty1 quiet nolapic_timer
bootsplash: silent mode.
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 8192 bytes)
Detected 1596.052 MHz processor.
Console: colour dummy device 80x25
console [tty1] enabled
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 504104k/513024k available (1904k kernel code, 7516k reserved, 543k data, 188k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xfff9b000 - 0xfffff000 ( 400 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xe0000000 - 0xff7fe000 ( 503 MB)
lowmem : 0xc0000000 - 0xdf500000 ( 501 MB)
.init : 0xc0369000 - 0xc0398000 ( 188 kB)
.data : 0xc02dc0d8 - 0xc0363fa4 ( 543 kB)
.text : 0xc0100000 - 0xc02dc0d8 (1904 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 64-bit timers, 14318180 Hz
Calibrating delay using timer specific routine.. 3195.60 BogoMIPS (lpj=6391204)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfe9fbff 00000000 00000000 00000000 0040c39d 00000000 00000001 00000000
monitor/mwait feature present.
using mwait in idle threads.
CPU: L1 I cache: 32K, L1 D cache: 24K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
CPU: After all inits, caps: bfe9fbff 00000000 00000000 00003940 0040c39d 00000000 00000001 00000000
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
ACPI: Core revision 20070126
CPU0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02
SMP alternatives: switching to SMP code
Booting processor 1/1 eip 3000
Initializing CPU#1
Calibrating delay using timer specific routine.. 3192.01 BogoMIPS (lpj=6384030)
CPU: After generic identify, caps: bfe9fbff 00000000 00000000 00000000 0040c39d 00000000 00000001 00000000
monitor/mwait feature present.
CPU: L1 I cache: 32K, L1 D cache: 24K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
CPU: After all inits, caps: bfe9fbff 00000000 00000000 00003940 0040c39d 00000000 00000001 00000000
CPU1: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02
Total of 2 processors activated (6387.61 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
PM: Fastpoweoff 1.0
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG
Setting up standard PCI resources
ACPI: EC: Look up EC in DSDT
ACPI Error (evxfregn-0109): lawson ec 06
[20070126]
ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
ACPI Error (evxfregn-0109): lawson ec 06
[20070126]
ACPI: System BIOS is requesting _OSI(Linux)
ACPI: If "acpi_osi=Linux" works better,
Please send dmidecode to linux-acpi@vger.kernel.org
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: Lawson Test 3
ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
PCI quirk: region 0500-053f claimed by ICH6 GPIO
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 9 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
libata version 2.21 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
Time: tsc clocksource has been installed.
Clockevents: could not switch to one-shot mode:<6>Clockevents: could not switch to one-shot mode: lapic is not functional.
Could not switch to high resolution mode on CPU 1
lapic is not functional.
Could not switch to high resolution mode on CPU 0
pnp: 00:01: ioport range 0x200-0x20f has been reserved
pnp: 00:01: ioport range 0x164e-0x164f has been reserved
pnp: 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
pnp: 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved
pnp: 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
pnp: 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
PCI: Bridge: 0000:00:1c.0
IO window: 3000-3fff
MEM window: 35200000-362fffff
PREFETCH window: 30000000-30ffffff
PCI: Bridge: 0000:00:1c.2
IO window: 2000-2fff
MEM window: 34100000-351fffff
PREFETCH window: 31000000-31ffffff
PCI: Bridge: 0000:00:1c.3
IO window: 1000-1fff
MEM window: 33000000-340fffff
PREFETCH window: 32000000-32ffffff
PCI: Bridge: 0000:00:1e.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1c.2 to 64
ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1c.3 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 6, 262144 bytes)
TCP bind hash table entries: 16384 (order: 5, 196608 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 102k freed
Simple Boot Flag value 0x5 read from CMOS RAM was invalid
Simple Boot Flag at 0x44 set to 0x1
Total HugeTLB memory allocated, 0
io scheduler noop registered
io scheduler deadline registered (default)
Boot video device is 0000:00:02.0
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
Allocate Port Service[0000:00:1c.0:pcie03]
PCI: Setting latency timer of device 0000:00:1c.2 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.2:pcie00]
Allocate Port Service[0000:00:1c.2:pcie02]
Allocate Port Service[0000:00:1c.2:pcie03]
PCI: Setting latency timer of device 0000:00:1c.3 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.3:pcie00]
Allocate Port Service[0000:00:1c.3:pcie02]
Allocate Port Service[0000:00:1c.3:pcie03]
vesafb: framebuffer at 0x20000000, mapped to 0xe0080000, using 2400k, total 7872k
vesafb: mode is 640x480x16, linelength=1280, pages=11
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 43971 bytes,<6>...found (640x480, 43983 bytes, v3).
Console: switching 1 lawson
consoles lawson 0
Console: switching consoles 1-17 to colour frame buffer device 78x25
fb0: VESA VGA frame buffer device
Real Time Clock Driver v1.12ac
hpet_resources: 0xfed00000 is busy
Linux agpgart interface v0.102
agpgart: Detected an Intel 945GME Chipset.
agpgart: Detected 7932K stolen memory.
agpgart: AGP aperture is 256M @ 0x20000000
[drm] Initialized drm 1.1.0 20060810
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:02.0 to 64
[drm] Initialized i915 1.6.0 20060119 on minor 0
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
loop: module loaded
ata_piix 0000:00:1f.2: version 2.12
ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x000140a0 irq 14
ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x000140a8 irq 15
ata2.00: ATA-5: SSDPAMM0008G1, Ver2.J0H, max UDMA/66
ata2.00: 15761088 sectors, multi 0: LBA
ata2.00: configured for UDMA/66
scsi 1:0:0:0: Direct-Access ATA SSDPAMM0008G1 Ver2 PQ: 0 ANSI: 5
sd 1:0:0:0: [sda] 15761088 512-byte hardware sectors (8070 MB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sda] 15761088 512-byte hardware sectors (8070 MB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 1:0:0:0: [sda] Attached SCSI disk
sd 1:0:0:0: Attached scsi generic sg0 type 0
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
i8042.c: Warning: Keylock active.
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 19
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 15
Starting balanced_irq
Using IPI No-Shortcut mode
RAMDISK: Compressed image found at block 0
EXT2-fs warning: checktime reached, running e2fsck is recommended
VFS: Mounted root (ext2 filesystem).
TuxOnIce: No attempt was made to resume from any image that might exist.
Freeing unused kernel memory: 188k freed
Warning: unable to open an initial console.
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04771/0xa40000
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input0
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 16, io mem 0x36444400
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
Initializing USB Mass Storage driver...
mtrr: no more MTRRs available
usb 1-5: new high speed USB device using ehci_hcd and address 2
usb 1-5: configuration #1 chosen from 1 choice
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
ACPI: SSDT 1F380C90, 0239 (r2 PmRef Cpu0Ist 3000 INTL 20051117)
ACPI: SSDT 1F37FE10, 01C7 (r2 PmRef Cpu0Cst 3001 INTL 20051117)
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: SSDT 1F380F10, 00D0 (r2 PmRef Cpu1Ist 3000 INTL 20051117)
ACPI: SSDT 1F37EF10, 0083 (r2 PmRef Cpu1Cst 3000 INTL 20051117)
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU1] (supports 8 throttling states)
input: Power Button (FF) as /devices/virtual/input/input2
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /devices/virtual/input/input3
ACPI: Power Button (CM) [PWRB]
input: Lid Switch as /devices/virtual/input/input4
ACPI: Lid Switch [LID0]
input: Sleep Button (CM) as /devices/virtual/input/input5
ACPI: Sleep Button (CM) [SLPB]
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 16, io base 0x00004080
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: Battery Slot [BAT1] (battery present)
ACPI: AC Adapter [ACAD] (on-line)
input: Video Bus as /devices/virtual/input/input6
ACPI: Video Device [OVGA] (multi-head: yes rom: yes post: no)
ath_hal: module license 'Proprietary' taints kernel.
ath_hal: 0.9.17.1 (AR5212, RF5111, RF5112, RF2413, RF5413)
ath_dfs: Version 2.0.0
Copyright (c) 2005-2006 Atheros Communications, Inc. All Rights Reserved
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004060
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 17, io base 0x00004040
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
wlan: 0.8.4.2 (Atheros/multi-bss)
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 18, io base 0x00004020
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ath_rate_atheros: Version 2.0.1
Copyright (c) 2001-2004 Atheros Communications, Inc, All Rights Reserved
intel_rng: FWH not detected
ath_pci: 0.9.4.5 (Atheros/multi-bss)
ath_pci: Acer-5.3.2.14-2008-Sep-23
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 18 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:02:00.0 to 64
#####################################################
####################WLAN ID:001c ####################
#####################################################
Setting ah_eepromDetach
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device Acer Crystal Eye webcam (064e:d101)
input: Acer Crystal Eye webcam as /devices/pci0000:00/0000:00:1d.7/usb1/1-5/1-5:1.0/input/input7
usbcore: registered new interface driver uvcvideo
USB Video Class driver (SVN r215)
SAMSoft library init ...
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1b.0 to 64
ForteMedia SAM-Soft Library Loaded!
ALC INITwifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
wifi0: mac 14.2 phy 7.0 radio 10.2
wifi0: Use hw queue 1 for WME_AC_BE traffic
wifi0: Use hw queue 0 for WME_AC_BK traffic
wifi0: Use hw queue 2 for WME_AC_VI traffic
wifi0: Use hw queue 3 for WME_AC_VO traffic
wifi0: Use hw queue 8 for CAB traffic
wifi0: Use hw queue 9 for beacons
wifi0: Atheros 5212: mem=0x34100000, irq=17
Marking TSC unstable due to: possible TSC halt in C2.
Time: hpet clocksource has been installed.
Clockevents: could not switch to one-shot mode:<6>Clockevents: could not switch to one-shot mode: lapic is not functional.
Could not switch to high resolution mode on CPU 1
lapic is not functional.
Could not switch to high resolution mode on CPU 0
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: HPC vendor_id 8086 device_id 27d0 ss_vid 0 ss_did 0
Load service driver hpdriver on pcie device 0000:00:1c.0:pcie02
pciehp: HPC vendor_id 8086 device_id 27d4 ss_vid 0 ss_did 0
pciehp: Device 0000:02:00.0 already exists at 2:0, cannot hot-add
pciehp: Cannot add device 0x2:0
Load service driver hpdriver on pcie device 0000:00:1c.2:pcie02
pciehp: HPC vendor_id 8086 device_id 27d6 ss_vid 0 ss_did 0
Load service driver hpdriver on pcie device 0000:00:1c.3:pcie02
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
PM: Fastpoweroff, default profile added
Clocksource tsc unstable (delta = -190510909 ns)
wlan: mac acl policy registered
<ath_vap_create> sc_softled = 0
ath_vap_create: LED ON
aufs 20080505
ath_stop_locked: LED OFF 2
Adding 1052248k swap on /dev/sda2. Priority:-1 extents:1 across:1052248k
[user@localhost ~]$
any ideas what I need to do to get my system updating without running in to errors? |
