LinuxQuestions.org

LinuxQuestions.org (/questions/)
-   Linux - Newbie (https://www.linuxquestions.org/questions/linux-newbie-8/)
-   -   New usb ralink 3072 adapter will not start in ubuntu 8.10 (https://www.linuxquestions.org/questions/linux-newbie-8/new-usb-ralink-3072-adapter-will-not-start-in-ubuntu-8-10-a-790538/)

Oldrabbit 02-21-2010 06:52 AM

New usb ralink 3072 adapter will not start in ubuntu 8.10
 
Hello to you all I have been using ubuntu 8.10 for over a year and have recently upgraded my huawei modem ubuntu will not recognise my new modem which has wireless capability so I went and got this new usb wireless adapter to connect using the wireless, I have followed the trouble shooting and have the windows drivers installed all ok but it will not enable the device I am at a total loss how to make it do what I need, I will say I am very thick when it comes to using the code to do anything and yet I build pc's and repair them for a hobby O im 54 years of age so please give detailed instructions for me to cure this problem.

I thamk you all in advance Ron. :newbie:

Oldrabbit 02-24-2010 03:40 PM

Hi to all and I see that 130 of you have read my post but no one seems to have an ans so I guess I will have to try and find out on the ubuntu site thanks anyway 2 all for looking.

Ron

schneidz 02-24-2010 03:50 PM

can you please post the output of
lsusb
ifconfig
ifconfig -a
iwconfig

Oldrabbit 02-25-2010 03:44 PM

Hi Schneidz thank you for your reply but please tell me how to get the info you ask for I do not know what to enter but do know its done in terminal.

many thanks again Ron. :-)

schneidz 02-25-2010 05:11 PM

just open a terminal paste in the commands then copy/ paste the output in your response (please use [code] tags so it is easier to read).

Oldrabbit 02-27-2010 08:35 AM

usb ralink following instructions
 
Hi Schneidz Thank you for taking the time to help me with my problem and sorry im slow but had to re connect my old modem to get ubuntu online ok here goes just hope I get it right.


isusb results

[Bus 004 Device 003: ID 148f:3072 Ralink Technology, Corp.
Bus 004 Device 002: ID 03f0:7611 Hewlett-Packard
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 004: ID 12d1:1003 Huawei Technologies Co., Ltd. E220 HSDPA Modem / E270 HSDPA/HSUPA Modem
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub]

ifconfig results


[eth0 Link encap:Ethernet HWaddr 00:1e:90:4c:95:71
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:216 Base address:0xa000

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:326 errors:0 dropped:0 overruns:0 frame:0
TX packets:326 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:26136 (26.1 KB) TX bytes:26136 (26.1 KB)

ppp0 Link encap:Point-to-Point Protocol
inet addr:92.40.237.3 P-t-P:10.64.64.64 Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1
RX packets:4964 errors:0 dropped:0 overruns:0 frame:0
TX packets:4151 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:3
RX bytes:5581153 (5.5 MB) TX bytes:524980 (524.9 KB)]


ifconfig-a results


[eth0 Link encap:Ethernet HWaddr 00:1e:90:4c:95:71
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:216 Base address:0xa000

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:326 errors:0 dropped:0 overruns:0 frame:0
TX packets:326 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:26136 (26.1 KB) TX bytes:26136 (26.1 KB)

pan0 Link encap:Ethernet HWaddr da:68:4b:33:f4:76
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

ppp0 Link encap:Point-to-Point Protocol
inet addr:92.40.237.3 P-t-P:10.64.64.64 Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1
RX packets:4985 errors:0 dropped:0 overruns:0 frame:0
TX packets:4172 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:3
RX bytes:5583154 (5.5 MB) TX bytes:527409 (527.4 KB)]


iwconfig results


[lo no wireless extensions.

eth0 no wireless extensions.

pan0 no wireless extensions.

ppp0 no wireless extensions.]


ok Scneidz I hope I have done this right and you can make sense of the results many thanks again for taking the trouble to help me.

Ron :newbie:

schneidz 02-27-2010 01:37 PM

i did a search for '3072 Ralink linux'.

it seems you need to somehow compile and install a driver module called rt2800usb.
maybe from this site: http://linuxwireless.org/en/users/Drivers/rt2800usb

can you show me the output of lsmod and see if a sudo modprobe rt2800usb will work.

i dont use ubuntu nor do i have this card so hopefully there wull be instructions when you dl the firmware for your specific card and distribution.

keirey 02-27-2010 06:11 PM

re: ralink 3072
 
I don't have experience with Ubuntu, but have had similar experience with Trisquel, an Ubuntu/Debian based distro. I recently installed a d-link rt3070 chipset wireless adapter, and found this link useful:
http://ubuntuforums.org/showthread.php?t=1289917

You do need to download the driver software/kernel module file from ralink at this site:
http://www.ralinktech.com/support.php?s=2

Download the RT3070USB(RT307x) file. You will be asked for your name and e-mail address by ralink before you can download the file.

You will also need to install your kernel-source, linux-headers for your kernel, and build-essential from your package manager (Synaptic package manager is used on Trisquel and Debian). It should not be necessary to recompile your kernel. Since I didn't have an internet connection on the machine with the adapter, I downloaded on a different computer, saved to a flash drive, and copied to the Desktop of the computer with the adapter.

Untar the downloaded file according to the instructions on the Ubuntu forum, or use your archive manager (file-roller) to unpack the file.

Open the README_STA_usb file for installation instructions. The ralink instructions will say RT2870 instead of RT3070 (or RT3072), but the procedure is the same. The instructions are not very well written, and
I suggest fully reading the ubuntuforums thread to get a good idea of what you need to do, especially the post on blacklisting kernel modules. That was what was necessary for me to do to get my adapter working. Otherwise, even if you have the ralink module installed correctly, your system will still try to load the default modules (rt2x00usb, rt2x00lib, rt73usb, etc.).

Good luck.

Oldrabbit 03-02-2010 06:05 PM

Usb Ralink 3070 adapter
 
Hi to you all.

Im sorry I have taken so long but have followed the instructions and have downloaded the driver as you have all shown me but I just cant work out what to do like err??? make file sorry guys its beyond me I will have to try and find someone near me in reading that can explain what I have to do in detail.

I thank you all for your help all the best and keep up the amazing good work :newbie:


All times are GMT -5. The time now is 11:57 PM.