multiple questions
Hardware Concepts:
1. Which one of these best describes the resource needed by all NICs? A. An IRQ and an I/O address B. A DMA and an IRQ C. All of the above D. It depends on whether it is internal or external 2. Which one of these is an advantage of NTFS? A. It is faster than SCSI and more secure B. NTFS cannot be affected by viruses C. NTFS can assign permissions for individual files D. It automatically backs up data where the archive attribute is set. 3. Are plug and play devices assigned resources by the BIOs or by the operating system? A. All the resources are set by the BIOS at boot up B. It depends on the BIOS setting for PnP OS C. It depends on the device manufacturer D. USB devices are set by the OS,all others by the BIOS 4. Which one of these best describes virtual memory? A. It is memory reserved for virtual device drivers B. Special SDRAM chips called VSDRAM C. It Is Memory used only before Windows loads Himem.sys D. It is a swap file on a hard disk which is controlled by the OS 5.Why would you set a CMOS system password? Choose the one best answer A. To prevent unauthorized users from using the PC B. To prevent unauthorized people from accessing the Network C. To prevent unauthorized people from changing the BIOS settings D. To prevent unauthorized people from changing the Windows desktop 6. Why is PCI gradually replacing ISA? A. PCI is faster and wider than ISA B. PCI is the same as ISA but with PnP added C. PCI hubs include a USB controller,and USB is needed for modern digital devices D. PCi is more suited to WOrkstations,but ISA is more suited to servers, so it is less popular 7. What is the most common technology for main memory in a PC? A. EE synchronous ROM B. Synchronous dynamic ROM C. CD RW RAM D. Statie RAM DIMMs 8. How many drivers must be set to Master in a PC with 2 IDE drivers on the same cable? A. If it is DVD or CD ROM both, otherwise only one B. It depends on which drive is the C: drive C. Only 1 D. 2 9. Which of the following should you not be concerned about when working inside a Laser Printer? A. Burns B. Electric shock C. Injury from toxic substances D. Damage to clothes 10.You install a SCSI drive. Should it be set to Master or to Slave? Choose the best answer A. Master and Slave does not apply to SCSI drives B. It should be set to Master C. It should be set to Slave D. It should be set to Cable Select 11. How can two physical drives be set up as one partition? A. Set one to Master and one to Slave and use FDISK B. Use NTFS C. If the drives are EIDE they can both be set to Master D. SCSI drives are obsolete 12. In a PC with two IDE drives, from different manufacturers, which driver(s) should be used? A. If one drive comes with UDMA, that drive should be Master and its drivers B. Only the driver from the Master drive C. Both drivers D. No drivers 13. In a laser printer how is the image fixed on to the paper? A. The cold ink dries on the heated paper B. The toner dust is melted on to the paper C. The toner liquid is squirted on to the paper in tiny dots D. The ink is in the paper and is developed by the laser to show the image 14. What does the F8 key do to Windows Startup? A. It displays the step-by_step boot process B. It pauses the Startup C. It causes Windows to use the backed up registry copy D. It causes Safe Mode 15. Which one of these best describes ATX? A. It is a new standard replacing PCI B. It is a motherboard size and shape specification C. It is the part of Win98/Win2000 that controls USb services D. It is part of the Windows kernel for Plug- and-Play 16. Which one of these best describes where cache memory is located? A. It is on the motherboard B. It is built in to the CPU C. L1 is in the CPU, L2 is on the motherboard D. L2 is in the CPU, L1 is on the motherboard 17. Which one of these is the most accurate way of finding the size of a file in Bytes? A. Use DIR at the commannd prompt B. Use Regedit/file C. Use Windows Explorer D. Use Internet Explorer with file://instead of http:// 18. A PC has a DVD-R drive. Which one of these can not be read by the DVD drive? A. A music CD B. A movie DVD C. A re-writable CDROM D. All the above can be read by a DVD drive 19. What happens if the CPU voltage is set too high? A. The CPU burns out B. CPU voltage is fixed at 5V so you cannot set it too high C. CPU voltage is automatically set by Windows on startup D. The CPU will detect the voltage and shut down to safe mode if it is set too high 20. In Windows what is the default for file listing in Windows Explorer? A. Details with extensions B. Icons C. Details with extensions hidden D. Thumbnails 21. What is the approximate capacity of a DVD? A. 5G B. 50G C. 500M D. 600M 22. Which one of these printer technologies best handles colour photos for SOHO? A. Ink Jet B. Laser C. Dot Matrix D. Litho |
Pay attention in class, study hard and then try your best to answer your homework questions. Posting here and asking others to answer the questions for you won't do you any good in the long run.
|
Additionally, it's against LQ rules to ask other people to do your homework for you.
Btw, the questions are not even related to linux. |
do your own homework !
|
All times are GMT -5. The time now is 12:57 AM. |