Mounting the Mobile USB to ubuntu 7.10???
Hi
while running the command lsusb i could able to locate the mobile phone in the usb2 (see the attachement). Please help me how to configure this in /dev/ttyUSB0 The output of lusb: solver@solverminds21:~$ lsusb Bus 001 Device 002: ID 0421:042e Nokia Mobile Phones Bus 001 Device 001: ID 0000:0000 Bus 003 Device 001: ID 0000:0000 Bus 002 Device 001: ID 0000:0000 Bus 004 Device 001: ID 0000:0000 --------------------------------------------- The dmesg output: ------------------------------ solver@solverminds21:~$ dmesg [ 0.000000] Linux version 2.6.22-14-generic (buildd@palmer) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 23:05:12 GMT 2007 (Ubuntu 2.6.22-14.46-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000001f6f0000 (usable) [ 0.000000] BIOS-e820: 000000001f6f0000 - 000000001f6fa000 (ACPI data) [ 0.000000] BIOS-e820: 000000001f6fa000 - 000000001f700000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000001f700000 - 0000000020000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 502MB LOWMEM available. [ 0.000000] found SMP MP-table at 000f6500 [ 0.000000] Entering add_active_range(0, 0, 128752) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 128752 [ 0.000000] HighMem 128752 -> 128752 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 128752 [ 0.000000] On node 0 totalpages: 128752 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 973 pages used for memmap [ 0.000000] Normal zone: 123683 pages, LIFO batch:31 [ 0.000000] HighMem zone: 0 pages used for memmap [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP signature @ 0xC00F6590 checksum 0 [ 0.000000] ACPI: RSDP 000F6590, 0014 (r0 PTLTD ) [ 0.000000] ACPI: RSDT 1F6F4DB8, 0038 (r1 PTLTD RSDT 60400D0 LTP 0) [ 0.000000] ACPI: FACP 1F6F9E9C, 0074 (r1 IBM THINKCEN 60400D0 PTL 1) [ 0.000000] ACPI: DSDT 1F6F4DF0, 50AC (r1 IBM THINKCEN 60400D0 MSFT 100000E) [ 0.000000] ACPI: FACS 1F6FAFC0, 0040 [ 0.000000] ACPI: TCPA 1F6F9F10, 0032 (r1 IBM THINKCEN 60400D0 PTL 1) [ 0.000000] ACPI: APIC 1F6F9F42, 005A (r1 PTLTD APIC 60400D0 LTP 0) [ 0.000000] ACPI: BOOT 1F6F9F9C, 0028 (r1 PTLTD $SBFTBL$ 60400D0 LTP 1) [ 0.000000] ACPI: MCFG 1F6F9FC4, 003C (r1 PTLTD MCFG 60400D0 LTP 0) [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 15:4 APIC version 20 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000) [ 0.000000] Built 1 zonelists. Total pages: 127747 [ 0.000000] Kernel command line: root=UUID=8f7393a4-5f8d-40a4-b7a8-acf94ea004fe ro quiet splash locale=en_US [ 0.000000] mapped APIC to ffffd000 (fee00000) [ 0.000000] mapped IOAPIC to ffffc000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes) [ 0.000000] Detected 2660.277 MHz processor. [ 9.564352] Console: colour VGA+ 80x25 [ 9.564542] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 9.564738] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 9.573297] Memory: 498700k/515008k available (2015k kernel code, 15660k reserved, 916k data, 364k init, 0k highmem) [ 9.573308] virtual kernel memory layout: [ 9.573310] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB) [ 9.573311] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 9.573312] vmalloc : 0xe0000000 - 0xff7fe000 ( 503 MB) [ 9.573313] lowmem : 0xc0000000 - 0xdf6f0000 ( 502 MB) [ 9.573314] .init : 0xc03e3000 - 0xc043e000 ( 364 kB) [ 9.573316] .data : 0xc02f7d26 - 0xc03dce84 ( 916 kB) [ 9.573317] .text : 0xc0100000 - 0xc02f7d26 (2015 kB) [ 9.573320] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 9.573358] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 [ 9.653185] Calibrating delay using timer specific routine.. 5325.43 BogoMIPS (lpj=10650873) [ 9.653210] Security Framework v1.0.0 initialized [ 9.653215] SELinux: Disabled at boot. [ 9.653228] Mount-cache hash table entries: 512 [ 9.653355] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000651d 00000000 00000000 [ 9.653364] monitor/mwait feature present. [ 9.653367] using mwait in idle threads. [ 9.653374] CPU: Trace cache: 12K uops, L1 D cache: 16K [ 9.653377] CPU: L2 cache: 1024K [ 9.653379] CPU: Hyper-Threading is disabled [ 9.653382] CPU: After all inits, caps: bfebfbff 20100000 00000000 0000b180 0000651d 00000000 00000000 [ 9.653392] Compat vDSO mapped to ffffe000. [ 9.653409] Checking 'hlt' instruction... OK. [ 9.669244] SMP alternatives: switching to UP code [ 9.669401] Freeing SMP alternatives: 11k freed [ 9.669690] Early unpacking initramfs... done [ 9.998829] ACPI: Core revision 20070126 [ 9.998895] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 10.003595] CPU0: Intel(R) Pentium(R) 4 CPU 2.66GHz stepping 01 [ 10.003636] Total of 1 processors activated (5325.43 BogoMIPS). [ 10.003793] ENABLING IO-APIC IRQs [ 10.003977] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 10.148026] Brought up 1 CPUs [ 10.148143] Booting paravirtualized kernel on bare hardware [ 10.148213] Time: 11:47:44 Date: 00/17/108 [ 10.148234] NET: Registered protocol family 16 [ 10.148322] EISA bus registered [ 10.148337] ACPI: bus type pci registered [ 10.148745] PCI: PCI BIOS revision 2.10 entry at 0xfd95d, last bus=10 [ 10.148747] PCI: Using configuration type 1 [ 10.148749] Setting up standard PCI resources [ 10.162530] ACPI: EC: Look up EC in DSDT [ 10.171611] ACPI: Interpreter enabled [ 10.171614] ACPI: (supports S0 S1 S3 S4 S5) [ 10.171639] ACPI: Using IOAPIC for interrupt routing [ 10.189885] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 10.189894] PCI: Probing PCI hardware (bus 00) [ 10.190457] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 10.190462] PCI quirk: region 1180-11bf claimed by ICH6 GPIO [ 10.190843] PCI: Transparent bridge - 0000:00:1e.0 [ 10.190885] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 10.191308] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT] [ 10.191448] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SLOT._PRT] [ 10.259109] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 9 10 11 12 14 15) [ 10.259229] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11 12 14 15) [ 10.259345] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 *10 11 12 14 15) [ 10.259461] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *9 10 11 12 14 15) [ 10.259581] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 10.259702] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 10.259829] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 10.259950] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 10.260055] Linux Plug and Play Support v0.97 (c) Adam Belay [ 10.260071] pnp: PnP ACPI init [ 10.260080] ACPI: bus type pnp registered [ 10.274685] pnp: PnP ACPI: found 14 devices [ 10.274688] ACPI: ACPI bus type pnp unregistered [ 10.274692] PnPBIOS: Disabled by ACPI PNP [ 10.274741] PCI: Using ACPI for IRQ routing [ 10.274745] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 10.285826] NET: Registered protocol family 8 [ 10.285829] NET: Registered protocol family 20 [ 10.285895] pnp: 00:01: iomem range 0xe0000000-0xefffffff has been reserved [ 10.285899] pnp: 00:01: iomem range 0xfebffc00-0xfebfffff has been reserved [ 10.285902] pnp: 00:01: iomem range 0xfed13000-0xfed13fff has been reserved [ 10.285906] pnp: 00:01: iomem range 0xfed18000-0xfed18fff has been reserved [ 10.287646] Time: tsc clocksource has been installed. [ 10.316191] PCI: Bridge: 0000:00:1c.0 [ 10.316193] IO window: disabled. [ 10.316199] MEM window: d0000000-d00fffff [ 10.316203] PREFETCH window: disabled. [ 10.316209] PCI: Bridge: 0000:00:1e.0 [ 10.316211] IO window: disabled. [ 10.316216] MEM window: disabled. [ 10.316220] PREFETCH window: disabled. [ 10.316249] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 16 [ 10.316257] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 10.316269] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 10.316281] NET: Registered protocol family 2 [ 10.355510] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 10.355546] TCP established hash table entries: 16384 (order: 5, 196608 bytes) [ 10.355670] TCP bind hash table entries: 16384 (order: 5, 131072 bytes) [ 10.355742] TCP: Hash tables configured (established 16384 bind 16384) [ 10.355745] TCP reno registered [ 10.367584] checking if image is initramfs... it is [ 10.818352] Switched to high resolution mode on CPU 0 [ 11.009341] Freeing initrd memory: 7351k freed [ 11.009453] Simple Boot Flag at 0x35 set to 0x1 [ 11.009788] audit: initializing netlink socket (disabled) [ 11.009803] audit(1200570464.112:1): initialized [ 11.012078] VFS: Disk quotas dquot_6.5.1 [ 11.012138] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 11.012233] io scheduler noop registered [ 11.012236] io scheduler anticipatory registered [ 11.012238] io scheduler deadline registered [ 11.012256] io scheduler cfq registered (default) [ 11.012270] Boot video device is 0000:00:02.0 [ 11.012504] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 11.012552] assign_interrupt_mode Found MSI capability [ 11.012556] Allocate Port Service[0000:00:1c.0:pcie00] [ 11.012596] Allocate Port Service[0000:00:1c.0:pcie02] [ 11.012758] isapnp: Scanning for PnP cards... [ 11.363922] isapnp: No Plug & Play device found [ 11.391091] Real Time Clock Driver v1.12ac [ 11.391189] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 11.391294] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 11.392010] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 11.392831] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 11.393044] input: Macintosh mouse button emulation as /class/input/input0 [ 11.393141] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PSM] at 0x60,0x64 irq 1,12 [ 11.395768] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 11.395775] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 11.395980] mice: PS/2 mouse device common for all mice [ 11.396106] EISA: Probing bus 0 at eisa.0 [ 11.396115] Cannot allocate resource for EISA slot 1 [ 11.396121] Cannot allocate resource for EISA slot 3 [ 11.396139] EISA: Detected 0 cards. [ 11.396223] TCP cubic registered [ 11.396236] NET: Registered protocol family 1 [ 11.396261] Using IPI No-Shortcut mode [ 11.396401] Magic number: 8:646:782 [ 11.396547] hash matches device ptyq4 [ 11.396816] Freeing unused kernel memory: 364k freed [ 11.440903] input: AT Translated Set 2 keyboard as /class/input/input1 [ 12.586459] AppArmor: AppArmor initialized<5>audit(1200570465.612:2): type=1505 info="AppArmor initialized" pid=1134 [ 12.592867] fuse init (API version 7.8) [ 12.597511] Failure registering capabilities with primary security module. [ 12.619064] ACPI: Processor [CPU0] (supports 8 throttling states) [ 12.620631] ACPI: Thermal Zone [THM0] (60 C) [ 13.099223] usbcore: registered new interface driver usbfs [ 13.099252] usbcore: registered new interface driver hub [ 13.099276] usbcore: registered new device driver usb [ 13.100150] USB Universal Host Controller Interface driver v3.0 [ 13.100214] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 17 [ 13.100225] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 13.100230] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 13.100375] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 13.100406] uhci_hcd 0000:00:1d.0: irq 17, io base 0x00003440 [ 13.100526] usb usb1: configuration #1 chosen from 1 choice [ 13.100561] hub 1-0:1.0: USB hub found [ 13.100567] hub 1-0:1.0: 2 ports detected [ 13.174286] SCSI subsystem initialized [ 13.180320] libata version 2.21 loaded. [ 13.256541] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 17 [ 13.256557] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 13.256562] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 13.256588] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 13.256624] ehci_hcd 0000:00:1d.7: debug port 1 [ 13.256631] PCI: cache line size of 128 is not supported by device 0000:00:1d.7 [ 13.256639] ehci_hcd 0000:00:1d.7: irq 17, io mem 0xd03c0000 [ 13.260525] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 13.260608] usb usb2: configuration #1 chosen from 1 choice [ 13.260638] hub 2-0:1.0: USB hub found [ 13.260646] hub 2-0:1.0: 6 ports detected [ 13.344834] FDC 0 is a post-1991 82077 [ 13.365149] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 18 [ 13.365163] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 13.365167] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 13.365201] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 13.365232] uhci_hcd 0000:00:1d.1: irq 18, io base 0x00003460 [ 13.365350] usb usb3: configuration #1 chosen from 1 choice [ 13.365385] hub 3-0:1.0: USB hub found [ 13.365393] hub 3-0:1.0: 2 ports detected [ 13.467968] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 19 [ 13.467982] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 13.467987] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 13.468014] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 13.468046] uhci_hcd 0000:00:1d.2: irq 19, io base 0x00003480 [ 13.468151] usb usb4: configuration #1 chosen from 1 choice [ 13.468186] hub 4-0:1.0: USB hub found [ 13.468192] hub 4-0:1.0: 2 ports detected [ 13.573560] tg3.c:v3.77 (May 31, 2007) [ 13.573589] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 20 [ 13.573602] PCI: Setting latency timer of device 0000:02:00.0 to 64 [ 13.613328] eth0: Tigon3 [partno(BCM95751F) rev 4101 PHY(5750)] (PCI Express) 10/100Base-TX Ethernet 00:14:85:a5:63:d6 [ 13.613337] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1] [ 13.613341] eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 13.613360] ata_piix 0000:00:1f.2: version 2.11 [ 13.613365] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] [ 13.767114] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 18 [ 13.767154] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 13.767239] scsi0 : ata_piix [ 13.767299] scsi1 : ata_piix [ 13.767418] ata1: SATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x000134d0 irq 14 [ 13.767423] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x000134d8 irq 15 [ 13.930882] ata1.00: ATA-7: WDC WD800JD-08LSA0, 07.01D07, max UDMA/133 [ 13.930887] ata1.00: 156312576 sectors, multi 16: LBA48 [ 13.938865] ata1.00: configured for UDMA/133 [ 14.282083] ata2.00: ATAPI: TSSTcorp CD-ROM TS-H192C, IB00, max UDMA/33 [ 14.477601] ata2.00: configured for UDMA/33 [ 14.477717] scsi 0:0:0:0: Direct-Access ATA WDC WD800JD-08LS 07.0 PQ: 0 ANSI: 5 [ 14.478910] scsi 1:0:0:0: CD-ROM TSSTcorp CD-ROM TS-H192C IB00 PQ: 0 ANSI: 5 [ 14.494605] sd 0:0:0:0: [sda] 156312576 512-byte hardware sectors (80032 MB) [ 14.494626] sd 0:0:0:0: [sda] Write Protect is off [ 14.494630] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 14.494652] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 14.494716] sd 0:0:0:0: [sda] 156312576 512-byte hardware sectors (80032 MB) [ 14.494729] sd 0:0:0:0: [sda] Write Protect is off [ 14.494732] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 14.494752] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 14.494756] sda: sda1 sda2 < sda5 sda6 sda7 > sda3 sda4 [ 14.537074] sd 0:0:0:0: [sda] Attached SCSI disk [ 14.543220] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 14.543356] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 14.565871] sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray [ 14.565877] Uniform CD-ROM driver Revision: 3.20 [ 14.566117] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 14.913639] Attempting manual resume [ 14.913644] swsusp: Resume From Partition 8:6 [ 14.913646] PM: Checking swsusp image. [ 14.913834] PM: Resume from disk failed. [ 14.946644] kjournald starting. Commit interval 5 seconds [ 14.946655] EXT3-fs: mounted filesystem with ordered data mode. [ 21.745633] Linux agpgart interface v0.102 (c) Dave Jones [ 21.822548] agpgart: Detected an Intel 915G Chipset. [ 21.822946] agpgart: Detected 7932K stolen memory. [ 21.840849] agpgart: AGP aperture is 256M @ 0xc0000000 [ 22.015983] intel_rng: Firmware space is locked read-only. <4>intel_rng: If you can't or [ 22.015986] don't want to <4>intel_rng: disable this in firmware setup, and <4>intel_rng: if [ 22.015988] you are certain that your <4>intel_rng: system has a functional [ 22.015990] RNG, try<4>intel_rng: using the 'no_fwh_detect' option. [ 22.027072] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 22.029191] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 22.459050] iTCO_vendor_support: vendor-support=0 [ 22.460134] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007) [ 22.908333] input: ImPS/2 Logitech Wheel Mouse as /class/input/input2 [ 22.910456] ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 17 (level, low) -> IRQ 16 [ 22.910474] PCI: Setting latency timer of device 0000:00:1e.2 to 64 [ 22.911162] pnp: Device 00:08 disabled. [ 22.911169] parport_pc: probe of 00:08 failed with error -22 [ 22.911394] iTCO_wdt: Found a ICH6 or ICH6R TCO device (Version=2, TCOBASE=0x1060) [ 22.911441] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 22.911598] input: PC Speaker as /class/input/input3 [ 23.331569] intel8x0_measure_ac97_clock: measured 52404 usecs [ 23.331573] intel8x0: clocking to 48000 [ 23.926158] lp: driver loaded but no devices found [ 23.953157] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended [ 23.953391] EXT3 FS on sda3, internal journal [ 26.150703] No dock devices found. [ 26.360072] input: Power Button (FF) as /class/input/input4 [ 26.364006] ACPI: Power Button (FF) [PWRF] [ 26.401970] input: Power Button (CM) as /class/input/input5 [ 26.405923] ACPI: Power Button (CM) [PWRB] [ 28.681989] ppdev: user-space parallel port driver [ 28.808857] audit(1200550682.932:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=4537 profile="/usr/sbin/cupsd" [ 29.577041] tg3: eth0: Link is up at 100 Mbps, full duplex. [ 29.577046] tg3: eth0: Flow control is on for TX and on for RX. [ 31.562142] IBM machine detected. Enabling interrupts during APM calls. [ 31.562148] apm: BIOS not found. [ 31.831520] NET: Registered protocol family 10 [ 31.831691] lo: Disabled Privacy Extensions [ 33.775821] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 33.846489] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 33.866252] NFSD: starting 90-second grace period [ 35.191993] Failure registering capabilities with primary security module. [ 37.055213] [drm] Initialized drm 1.1.0 20060810 [ 37.080595] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 20 [ 37.082885] [drm] Initialized i915 1.6.0 20060119 on minor 0 [ 39.896537] NET: Registered protocol family 17 [ 54.674736] eth0: no IPv6 routers present solver@solverminds21:~$ ---------------------------------------------------- |
All times are GMT -5. The time now is 03:48 AM. |