lsmod detalis

drpix · 04-25-2012, 04:34 AM

i have two question am running redhat 5.4
1-how can i know module name for my network card and fiber card
2-how to scan for lun assign to my linux server.

Tinkster · 04-25-2012, 04:39 AM

Hi, welcome to LQ!

Ad 1) you look at the output of lspci and google for linux module &
the matching device. =o) ... alternatively (naively assuming that Linux has
picked them up correctly) look at the loaded modules (lsmod) and google
for the devices they match.

Ad 2) not sure what you're referring to; if it's assigned on the SAN side
ask the person who assigned you the LUN?

Cheers,
Tink

Satyaveer Arya · 04-25-2012, 04:39 AM

Quote:

how can i know module name for my network card and fiber card

Code:

# dmesg | grep 'Ethernet driver'

This is for ethernet card.

drpix · 04-25-2012, 05:20 AM

i got the output for fiber card like this
0e:00.0 Fibre Channel: QLogic Corp. ISP2432-based 4Gb Fibre Channel to PCI Express HBA (rev 03)
how to get from it the module detalis also the network card i found bnx2 how to get it.

Satyaveer Arya · 04-25-2012, 05:23 AM

Using lsmod command or using less /proc/modules you can get the modules information.

drpix · 04-25-2012, 06:31 AM

for example i got the modinfo for Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v1.9.3 (March 17, 2009)
and then it was bnx2

how about for this 0e:00.0 Fibre Channel: QLogic Corp. ISP2432-based 4Gb Fibre Channel to PCI Express HBA (rev 03)
how to get the modinfo after type #lsmod how can i know what is the fibre module