LinuxQuestions.org
Help answer threads with 0 replies.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Newbie
User Name
Password
Linux - Newbie This Linux forum is for members that are new to Linux.
Just starting out and have a question? If it is not in the man pages or the how-to's this is the place!

Notices


Reply
  Search this Thread
Old 12-04-2017, 06:56 AM   #1
pablocool
LQ Newbie
 
Registered: Dec 2017
Posts: 9

Rep: Reputation: Disabled
Kernel Panic not syncing, Attempted to kill init


Hello

I have prepared portable gentoo distribution on pendrive. I had to include my own custom initramfs because I needed to wait until USB ready.
This is how it looks like:
Code:
#!/bin/busybox sh
ROOT="99927ee8-3807-4fad-84dd-b247e0e06c0f"

rescue_shell() {
    echo "Something went wrong. Dropping to a shell."
    exec sh
}

# Mount the /proc and /sys filesystems.
mount -t proc none /proc || rescue_shell
mount -t sysfs none /sys || rescue_shell

# Wait until root device is ready
#while [ 1 ]; do
#  blkid | grep $ROOT > /dev/null
#  if [ $? -eq 0 ]; then
#    exit
#  fi
#done

until blkid | grep $ROOT > /dev/null; do
  sleep 1
done

# Do your stuff here.
echo "This script just mounts and boots the rootfs, nothing else!"

# Mount the root filesystem.
mount -o ro $(findfs UUID="$ROOT") /mnt/root || rescue_shell

# Clean up.
umount /proc || rescue_shell
umount /sys || rescue_shell

# Boot the real thing.
#exec switch_root /mnt/root /sbin/init || rescue_shell
exec switch_root /mnt/root /usr/lib/systemd/systemd
Of course I included all needed USB/FS modeules into kernel.
Code:
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_PCI=y
CONFIG_USB_XHCI_PLATFORM=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_PCI=y
CONFIG_USB_EHCI_HCD_PLATFORM=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PCI=y
CONFIG_USB_OHCI_HCD_PLATFORM=y
CONFIG_USB_UHCI_HCD=y
https://www.dropbox.com/s/ji5x9ggbfs...el-1.JPG?raw=1
All looked fine. It is booting in VirtualBox (via small transparent file pointing my USB), my laptop Samsung Ultra 7, X99 Xeon server and small PC based on i3.
However when I tried to run it on old ACER 5100 or on other new server I met kernel panic

https://www.dropbox.com/s/27if7vz670...ic-1.JPG?raw=1

https://www.dropbox.com/s/5mr6497qsk...ic-2.JPG?raw=1

I stuck. I have no idea what may be wrong. I boot those two machines from gentoo or ubuntu livecd with success. I investigated modules and all looks to be in place.
Google is totally not helpful. Looks noone creates custom initramfs scripts.
I need your help Guys. Below are lspci output from those 2 problematic machines.

BR
Paweł

This is output from problematic server run from livecd:

Code:
0:00.0 Host bridge [0600]: Intel Corporation Sky Lake Host Bridge/DRAM Registers [8086:190f] (rev 07)
        Subsystem: Biostar Microtech Int'l Corp Skylake Host Bridge/DRAM Registers [1565:3114]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
        Latency: 0
        Capabilities: <access denied>
        Kernel driver in use: skl_uncore

00:01.0 PCI bridge [0604]: Intel Corporation Sky Lake PCIe Controller (x16) [8086:1901] (rev 07) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 120
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
        I/O behind bridge: 0000e000-0000efff
        Memory behind bridge: de000000-df0fffff
        Prefetchable memory behind bridge: 0000002fe0000000-0000002ff1ffffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport
        Kernel modules: shpchp

00:02.0 VGA compatible controller [0300]: Intel Corporation Device [8086:1902] (rev 06) (prog-if 00 [VGA controller])
        Subsystem: Biostar Microtech Int'l Corp Device [1565:3114]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 130
        Region 0: Memory at 2ffe000000 (64-bit, non-prefetchable) [size=16M]
        Region 2: Memory at c0000000 (64-bit, prefetchable) [size=256M]
        Region 4: I/O ports at f000 [size=64]
        [virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
        Capabilities: <access denied>
        Kernel driver in use: i915
        Kernel modules: i915

00:08.0 System peripheral [0880]: Intel Corporation Sky Lake Gaussian Mixture Model [8086:1911]
        Subsystem: Biostar Microtech Int'l Corp Skylake Gaussian Mixture Model [1565:3114]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 11
        Region 0: Memory at 2fff012000 (64-bit, non-prefetchable) [size=4K]
        Capabilities: <access denied>

00:14.0 USB controller [0c03]: Intel Corporation Device [8086:a2af] (prog-if 30 [XHCI])
        Subsystem: Biostar Microtech Int'l Corp Device [1565:6409]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 127
        Region 0: Memory at 2fff000000 (64-bit, non-prefetchable) [size=64K]
        Capabilities: <access denied>
        Kernel driver in use: xhci_hcd

00:16.0 Communication controller [0780]: Intel Corporation Device [8086:a2ba]
        Subsystem: Biostar Microtech Int'l Corp Device [1565:3114]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 131
        Region 0: Memory at 2fff011000 (64-bit, non-prefetchable) [size=4K]
        Capabilities: <access denied>
        Kernel driver in use: mei_me
        Kernel modules: mei_me

00:17.0 SATA controller [0106]: Intel Corporation Device [8086:a282] (prog-if 01 [AHCI 1.0])
        Subsystem: Biostar Microtech Int'l Corp Device [1565:5223]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 128
        Region 0: Memory at d7104000 (32-bit, non-prefetchable) [size=8K]
        Region 1: Memory at d7107000 (32-bit, non-prefetchable) [size=256]
        Region 2: I/O ports at f090 [size=8]
        Region 3: I/O ports at f080 [size=4]
        Region 4: I/O ports at f060 [size=32]
        Region 5: Memory at d7106000 (32-bit, non-prefetchable) [size=2K]
        Capabilities: <access denied>
        Kernel driver in use: ahci
        Kernel modules: ahci

00:1b.0 PCI bridge [0604]: Intel Corporation Device [8086:a2eb] (rev f0) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 121
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
        I/O behind bridge: 0000d000-0000dfff
        Memory behind bridge: dc000000-dd0fffff
        Prefetchable memory behind bridge: 0000002fc0000000-0000002fd1ffffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport
        Kernel modules: shpchp

00:1b.5 PCI bridge [0604]: Intel Corporation Device [8086:a2ec] (rev f0) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin B routed to IRQ 122
        Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
        I/O behind bridge: 0000c000-0000cfff
        Memory behind bridge: da000000-db0fffff
        Prefetchable memory behind bridge: 0000002fa0000000-0000002fb1ffffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport
        Kernel modules: shpchp

00:1c.0 PCI bridge [0604]: Intel Corporation Device [8086:a294] (rev f0) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 123
        Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
        I/O behind bridge: 0000b000-0000bfff
        Memory behind bridge: df200000-df2fffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport
        Kernel modules: shpchp

00:1c.5 PCI bridge [0604]: Intel Corporation Device [8086:a295] (rev f0) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin B routed to IRQ 124
        Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
        I/O behind bridge: 0000a000-0000afff
        Memory behind bridge: d8000000-d90fffff
        Prefetchable memory behind bridge: 0000002f80000000-0000002f91ffffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport
        Kernel modules: shpchp

00:1c.6 PCI bridge [0604]: Intel Corporation Device [8086:a296] (rev f0) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin C routed to IRQ 125
        Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
        I/O behind bridge: 00009000-00009fff
        Memory behind bridge: d6000000-d70fffff
        Prefetchable memory behind bridge: 0000002f60000000-0000002f71ffffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport
        Kernel modules: shpchp

00:1c.7 PCI bridge [0604]: Intel Corporation Device [8086:a297] (rev f0) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin D routed to IRQ 126
        Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
        I/O behind bridge: 00008000-00008fff
        Memory behind bridge: d4000000-d50fffff
        Prefetchable memory behind bridge: 0000002f40000000-0000002f51ffffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport
        Kernel modules: shpchp

00:1f.0 ISA bridge [0601]: Intel Corporation Device [8086:a2c8]
        Subsystem: Biostar Microtech Int'l Corp Device [1565:3114]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0

00:1f.2 Memory controller [0580]: Intel Corporation Device [8086:a2a1]
        Subsystem: Biostar Microtech Int'l Corp Device [1565:3114]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Region 0: Memory at d7100000 (32-bit, non-prefetchable) [size=16K]

00:1f.4 SMBus [0c05]: Intel Corporation Device [8086:a2a3]
        Subsystem: Biostar Microtech Int'l Corp Device [1565:3114]
        Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Interrupt: pin A routed to IRQ 11
        Region 0: Memory at 2fff010000 (64-bit, non-prefetchable) [size=256]
        Region 4: I/O ports at f040 [size=32]
        Kernel modules: i2c_i801

01:00.0 VGA compatible controller [0300]: NVIDIA Corporation Device [10de:1b81] (rev a1) (prog-if 00 [VGA controller])
        Subsystem: ASUSTeK Computer Inc. Device [1043:8599]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 132
        Region 0: Memory at de000000 (32-bit, non-prefetchable) [size=16M]
        Region 1: Memory at 2fe0000000 (64-bit, prefetchable) [size=256M]
        Region 3: Memory at 2ff0000000 (64-bit, prefetchable) [size=32M]
        Region 5: I/O ports at e000 [size=128]
        [virtual] Expansion ROM at df000000 [disabled] [size=512K]
        Capabilities: <access denied>
        Kernel driver in use: nvidia
        Kernel modules: nvidiafb, nouveau, nvidia_drm, nvidia

01:00.1 Audio device [0403]: NVIDIA Corporation Device [10de:10f0] (rev a1)
        Subsystem: ASUSTeK Computer Inc. Device [1043:8599]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin B routed to IRQ 17
        Region 0: Memory at df080000 (32-bit, non-prefetchable) [size=16K]
        Capabilities: <access denied>
        Kernel driver in use: snd_hda_intel
        Kernel modules: snd_hda_intel
And this from ACER:

Code:
00:00.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD/ATI] RS480/RS482/RS485 Host Bridge [1002:5950] (rev 10)
	Subsystem: Acer Incorporated [ALI] RS480/RS482/RS485 Host Bridge [1025:009f]
	Flags: bus master, 66MHz, medium devsel, latency 64

00:01.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] RC4xx/RS4xx PCI Bridge [int gfx] [1002:5a3f] (prog-if 00 [Normal decode])
	Flags: bus master, 66MHz, medium devsel, latency 64
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
	I/O behind bridge: 00009000-00009fff
	Memory behind bridge: fc000000-fc0fffff
	Prefetchable memory behind bridge: 00000000f8000000-00000000fbffffff
	Capabilities: [44] HyperTransport: MSI Mapping Enable+ Fixed+
	Capabilities: [b0] Subsystem: Acer Incorporated [ALI] RC4xx/RS4xx PCI Bridge [int gfx] [1025:009f]

00:04.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] RC4xx/RS4xx PCI Express Port 1 [1002:5a36] (prog-if 00 [Normal decode])
	Flags: fast devsel
	Bus: primary=00, secondary=02, subordinate=03, sec-latency=0
	I/O behind bridge: 00002000-00002fff
	Memory behind bridge: 68000000-681fffff
	Prefetchable memory behind bridge: 0000000068200000-00000000683fffff
	Capabilities: [50] Power Management version 3
	Capabilities: [58] Express Root Port (Slot+), MSI 00
	Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
	Capabilities: [b0] Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] RC4xx/RS4xx PCI Express Port 1 [1002:5950]
	Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
	Kernel driver in use: pcieport

00:05.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] RC4xx/RS4xx PCI Express Port 2 [1002:5a37] (prog-if 00 [Normal decode])
	Flags: fast devsel
	Bus: primary=00, secondary=04, subordinate=05, sec-latency=0
	I/O behind bridge: 00003000-00003fff
	Memory behind bridge: 68400000-685fffff
	Prefetchable memory behind bridge: 0000000068600000-00000000687fffff
	Capabilities: [50] Power Management version 3
	Capabilities: [58] Express Root Port (Slot+), MSI 00
	Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
	Capabilities: [b0] Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] RC4xx/RS4xx PCI Express Port 2 [1002:5950]
	Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
	Kernel driver in use: pcieport

00:12.0 IDE interface [0101]: Advanced Micro Devices, Inc. [AMD/ATI] IXP SB4x0 Serial ATA Controller [1002:4379] (rev 80) (prog-if 8f [Master SecP SecO PriP PriO])
	Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] IXP SB4x0 Serial ATA Controller [1002:4379]
	Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 22
	I/O ports at 8440 [size=8]
	I/O ports at 8434 [size=4]
	I/O ports at 8438 [size=8]
	I/O ports at 8430 [size=4]
	I/O ports at 8400 [size=16]
	Memory at fc407000 (32-bit, non-prefetchable) [size=512]
	[virtual] Expansion ROM at 68800000 [disabled] [size=512K]
	Capabilities: [60] Power Management version 2
	Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit-
	Kernel driver in use: sata_sil
	Kernel modules: sata_sil, pata_acpi, ata_generic

00:13.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] IXP SB4x0 USB Host Controller [1002:4374] (rev 80) (prog-if 10 [OHCI])
	Subsystem: Acer Incorporated [ALI] IXP SB4x0 USB Host Controller [1025:009f]
	Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 19
	Memory at fc404000 (32-bit, non-prefetchable) [size=4K]
	Kernel driver in use: ohci-pci
	Kernel modules: ohci_pci

00:13.1 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] IXP SB4x0 USB Host Controller [1002:4375] (rev 80) (prog-if 10 [OHCI])
	Subsystem: Acer Incorporated [ALI] IXP SB4x0 USB Host Controller [1025:009f]
	Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 19
	Memory at fc405000 (32-bit, non-prefetchable) [size=4K]
	Kernel driver in use: ohci-pci
	Kernel modules: ohci_pci

00:13.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] IXP SB4x0 USB2 Host Controller [1002:4373] (rev 80) (prog-if 20 [EHCI])
	Subsystem: Acer Incorporated [ALI] IXP SB4x0 USB2 Host Controller [1025:009f]
	Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 19
	Memory at fc406000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: [dc] Power Management version 2
	Kernel driver in use: ehci-pci
	Kernel modules: ehci_pci

00:14.0 SMBus [0c05]: Advanced Micro Devices, Inc. [AMD/ATI] IXP SB4x0 SMBus Controller [1002:4372] (rev 83)
	Subsystem: Acer Incorporated [ALI] IXP SB4x0 SMBus Controller [1025:009f]
	Flags: 66MHz, medium devsel
	I/O ports at 8410 [size=16]
	Memory at 68880000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: [b0] HyperTransport: MSI Mapping Enable- Fixed+

00:14.1 IDE interface [0101]: Advanced Micro Devices, Inc. [AMD/ATI] IXP SB4x0 IDE Controller [1002:4376] (rev 80) (prog-if 82 [Master PriP])
	Subsystem: Acer Incorporated [ALI] IXP SB4x0 IDE Controller [1025:009f]
	Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 16
	I/O ports at 01f0 [size=8]
	I/O ports at 03f4
	I/O ports at 0170 [size=8]
	I/O ports at 0374
	I/O ports at 8420 [size=16]
	Capabilities: [70] MSI: Enable- Count=1/1 Maskable- 64bit-
	Kernel driver in use: pata_atiixp
	Kernel modules: pata_atiixp, pata_acpi, ata_generic

00:14.2 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] IXP SB4x0 High Definition Audio Controller [1002:437b] (rev 01)
	Subsystem: Acer Incorporated [ALI] IXP SB4x0 High Definition Audio Controller [1025:009f]
	Flags: bus master, slow devsel, latency 64, IRQ 16
	Memory at fc400000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: [50] Power Management version 2
	Capabilities: [60] MSI: Enable- Count=1/1 Maskable- 64bit+
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd_hda_intel

00:14.3 ISA bridge [0601]: Advanced Micro Devices, Inc. [AMD/ATI] IXP SB4x0 PCI-ISA Bridge [1002:4377] (rev 80)
	Subsystem: Acer Incorporated [ALI] IXP SB4x0 PCI-ISA Bridge [1025:009f]
	Flags: bus master, 66MHz, medium devsel, latency 0

00:14.4 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] IXP SB4x0 PCI-PCI Bridge [1002:4371] (rev 80) (prog-if 01 [Subtractive decode])
	Flags: bus master, 66MHz, medium devsel, latency 64
	Bus: primary=00, secondary=06, subordinate=08, sec-latency=64
	I/O behind bridge: 0000a000-0000afff
	Memory behind bridge: fc100000-fc1fffff
	Prefetchable memory behind bridge: 60000000-67ffffff

00:18.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
	Flags: fast devsel
	Capabilities: [80] HyperTransport: Host or Secondary Interface

00:18.1 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
	Flags: fast devsel

00:18.2 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
	Flags: fast devsel

00:18.3 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
	Flags: fast devsel
	Capabilities: [f0] Secure device <?>

01:05.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] RS482M [Mobility Radeon Xpress 200] [1002:5975] (prog-if 00 [VGA controller])
	Subsystem: Acer Incorporated [ALI] RS482M [Mobility Radeon Xpress 200] [1025:009f]
	Flags: bus master, 66MHz, medium devsel, latency 66, IRQ 11
	Memory at f8000000 (32-bit, prefetchable) [size=64M]
	I/O ports at 9000 [size=256]
	Memory at fc000000 (32-bit, non-prefetchable) [size=64K]
	[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
	Capabilities: [50] Power Management version 2

06:01.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8100/8101L/8139 PCI Fast Ethernet Adapter [10ec:8139] (rev 10)
	Subsystem: Acer Incorporated [ALI] RTL-8100/8101L/8139 PCI Fast Ethernet Adapter [1025:009f]
	Flags: bus master, medium devsel, latency 64, IRQ 21
	I/O ports at a000 [size=256]
	Memory at fc100000 (32-bit, non-prefetchable) [size=256]
	Capabilities: [50] Power Management version 2
	Kernel driver in use: 8139too
	Kernel modules: 8139cp, 8139too

06:02.0 Ethernet controller [0200]: Qualcomm Atheros AR2413/AR2414 Wireless Network Adapter [AR5005G(S) 802.11bg] [168c:001a] (rev 01)
	Subsystem: AMBIT Microsystem Corp. AR2413/AR2414 Wireless Network Adapter [AR5005G(S) 802.11bg] [1468:0418]
	Flags: bus master, medium devsel, latency 168, IRQ 22
	Memory at fc110000 (32-bit, non-prefetchable) [size=64K]
	Capabilities: [44] Power Management version 2
	Kernel driver in use: ath5k
	Kernel modules: ath5k

06:04.0 CardBus bridge [0607]: ENE Technology Inc CB-712/4 Cardbus Controller [1524:1412] (rev 10)
	Subsystem: Acer Incorporated [ALI] CB-712/4 Cardbus Controller [1025:009f]
	Flags: bus master, medium devsel, latency 168, IRQ 20
	Memory at fc101000 (32-bit, non-prefetchable) [size=4K]
	Bus: primary=06, secondary=07, subordinate=07, sec-latency=176
	Memory window 0: 60000000-63ffffff (prefetchable)
	Memory window 1: 6c000000-6fffffff
	I/O window 0: 0000a400-0000a4ff
	I/O window 1: 0000a800-0000a8ff
	16-bit legacy interface ports at 0001
	Capabilities: [a0] Power Management version 1
	Kernel driver in use: yenta_cardbus
	Kernel modules: yenta_socket

06:04.1 FLASH memory [0501]: ENE Technology Inc ENE PCI Memory Stick Card Reader Controller [1524:0530] (rev 01)
	Subsystem: Acer Incorporated [ALI] ENE PCI Memory Stick Card Reader Controller [1025:009f]
	Flags: bus master, medium devsel, latency 64, IRQ 10
	Memory at fc100400 (32-bit, non-prefetchable) [size=128]
	Capabilities: [80] Power Management version 2

06:04.2 SD Host controller [0805]: ENE Technology Inc ENE PCI Secure Digital Card Reader Controller [1524:0550] (rev 01) (prog-if 01)
	Subsystem: Acer Incorporated [ALI] ENE PCI Secure Digital Card Reader Controller [1025:009f]
	Flags: bus master, medium devsel, latency 64, IRQ 23
	Memory at fc100800 (32-bit, non-prefetchable) [size=256]
	Capabilities: [80] Power Management version 2
	Kernel driver in use: sdhci-pci
	Kernel modules: sdhci_pci

06:04.3 FLASH memory [0501]: ENE Technology Inc FLASH memory: ENE Technology Inc: [1524:0520] (rev 01)
	Subsystem: Acer Incorporated [ALI] FLASH memory: ENE Technology Inc: [1025:009f]
	Flags: bus master, medium devsel, latency 64, IRQ 10
	Memory at fc100c00 (32-bit, non-prefetchable) [size=128]
	Capabilities: [80] Power Management version 2

06:04.4 FLASH memory [0501]: ENE Technology Inc SD/MMC Card Reader Controller [1524:0551] (rev 01)
	Subsystem: Acer Incorporated [ALI] SD/MMC Card Reader Controller [1025:009f]
	Flags: medium devsel, IRQ 23
	Memory at fc100100 (32-bit, non-prefetchable) [size=256]
	Capabilities: [80] Power Management version 2
	Kernel driver in use: sdhci-pci
	Kernel modules: sdhci_pci
 
Old 12-04-2017, 07:17 AM   #2
rtmistler
Moderator
 
Registered: Mar 2011
Location: Sutton, MA. USA
Distribution: MINT Debian, Angstrom, SUSE, Ubuntu
Posts: 5,948
Blog Entries: 12

Rep: Reputation: 2029Reputation: 2029Reputation: 2029Reputation: 2029Reputation: 2029Reputation: 2029Reputation: 2029Reputation: 2029Reputation: 2029Reputation: 2029Reputation: 2029
Hi not sure if this will be useful, but have you reviewed the existing sticky thread on kernel panic of the same name as your thread?

A suspicion is that you've now tried this on old, and actual hardware and some of the advice in the sticky may be useful to you.
 
Old 12-04-2017, 07:23 AM   #3
pablocool
LQ Newbie
 
Registered: Dec 2017
Posts: 9

Original Poster
Rep: Reputation: Disabled
Thanks. I ve seen this thread before. However no one tip apply to my situation as my pendrive boots successfully on some machines and on some not.
 
Old 12-04-2017, 10:16 AM   #4
Drakeo
Senior Member
 
Registered: Jan 2008
Location: Urbana IL
Distribution: Slackware, Slacko,
Posts: 3,230
Blog Entries: 3

Rep: Reputation: 345Reputation: 345Reputation: 345Reputation: 345
Quote:
Originally Posted by pablocool View Post
Thanks. I ve seen this thread before. However no one tip apply to my situation as my pendrive boots successfully on some machines and on some not.
I replied to your other thread gave you the fix up to you to understand it. go look at how we do it at slackware.

https://mirrors.kernel.org/slackware...xe-installers/
this will point you read the scripts.

read the scripts
https://docs.slackware.com/slackware:liveslak

put system on drive boot drive point loader to partition.
KISS method works.
 
Old 12-04-2017, 10:59 AM   #5
pablocool
LQ Newbie
 
Registered: Dec 2017
Posts: 9

Original Poster
Rep: Reputation: Disabled
fstab is correct, because some PCs boot correctly.

Problem is definitely with initramfs. I removed initramfs file from /boot dir.
executed command
grub-mkconfig -o /boot/grub/grub.cfg (root=sda.. appeared instead of uuid in grub.cfg)
and put sda instead of uuid into /etc/fstab
Then all PCs boot correctly even old ACER 5100.

So why initramfs is ok for some PCs and not ok for some?
 
Old 12-04-2017, 11:08 AM   #6
sundialsvcs
LQ Guru
 
Registered: Feb 2004
Location: SE Tennessee, USA
Distribution: Gentoo, LFS
Posts: 8,672
Blog Entries: 4

Rep: Reputation: 3020Reputation: 3020Reputation: 3020Reputation: 3020Reputation: 3020Reputation: 3020Reputation: 3020Reputation: 3020Reputation: 3020Reputation: 3020Reputation: 3020
This step of the Linux boot process is particularly fragile, as the pre-boot software attempts to determine what drivers might be needed in order to run on this piece of hardware.
 
Old 12-04-2017, 05:02 PM   #7
Drakeo
Senior Member
 
Registered: Jan 2008
Location: Urbana IL
Distribution: Slackware, Slacko,
Posts: 3,230
Blog Entries: 3

Rep: Reputation: 345Reputation: 345Reputation: 345Reputation: 345
Quote:
Originally Posted by pablocool View Post
fstab is correct, because some PCs boot correctly.

Problem is definitely with initramfs. I removed initramfs file from /boot dir.
executed command
grub-mkconfig -o /boot/grub/grub.cfg (root=sda.. appeared instead of uuid in grub.cfg)
and put sda instead of uuid into /etc/fstab
Then all PCs boot correctly even old ACER 5100.

So why initramfs is ok for some PCs and not ok for some?
Do not waist my time this is 2 of your three threads if you do not understand do like I did learn.
stop making duplicate threads my first reply to you step by step.
https://www.linuxquestions.org/quest...2/#post5788610
 
Old 12-04-2017, 05:06 PM   #8
pablocool
LQ Newbie
 
Registered: Dec 2017
Posts: 9

Original Poster
Rep: Reputation: Disabled
This is duplicate thread by mistake and may be closed.
 
Old 12-08-2017, 01:48 AM   #9
pablocool
LQ Newbie
 
Registered: Dec 2017
Posts: 9

Original Poster
Rep: Reputation: Disabled
Issue was much more complicted. As it turned out busybox was throwing "invalid opcode"
That means it was compiled on good architecture but with wrong processor extensions.
I needed to add to CFLAGS -mtune=generic

/Paweł
 
Old 12-08-2017, 02:30 AM   #10
KindachiShota
LQ Newbie
 
Registered: Oct 2017
Location: Japan
Posts: 5

Rep: Reputation: Disabled
Wow thanks!
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



Similar Threads
Thread Thread Starter Forum Replies Last Post
kernel panic -not syncing Attempted to kill init fengyufeng Linux From Scratch 2 12-19-2011 07:48 PM
Kernel panic - not syncing: Attempted to kill init, Pid: 1, comm: init Not tainted 2. morriset Linux - Kernel 3 07-02-2011 09:04 AM
/sbin/init: Kernel panic - not syncing: Attempted to kill init! jalejo08 Linux - Kernel 7 07-02-2009 02:16 PM
Kernel panic - not syncing: Attempted to kill init! Wocky Linux - Kernel 6 01-26-2007 10:25 PM
kernel panic - not syncing: Attempted to kill init! rh_bomani Linux - General 2 06-01-2006 06:21 PM

LinuxQuestions.org > Forums > Linux Forums > Linux - Newbie

All times are GMT -5. The time now is 11:17 AM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration