Hello,
I'm not quite a newbie but I'm not very experienced with linux either and I have a problem! I'm trying to get the above card working with Ardour. The card comes up in the volume control, which indicates sound coming through, but Ardour can't seem to get any sound out of it. I'm guessing it's a JACK problem.
Jack settings (running as root):
* Realtime enabled
* Frames: 128
* Sample Rate: 48kHz
* Periods/Buffer: 2
* Port Max: 256
* Timeout: 500msec
* input + output set to hw1,0 (USB Audio)
* Driver: ALSA
Code:
yann@linux-0muu:~> /sbin/lspci
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02)
00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 02)
00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02)
06:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02)
07:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8036 PCI-E Fast Ethernet Controller (rev 15)
09:04.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller
09:04.1 FireWire (IEEE 1394): Texas Instruments PCIxx12 OHCI Compliant IEEE 1394 Host Controller
09:04.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD)
Code:
(hwinfo output)
...
63: USB 00.0: 0000 Unclassified device
[Created at usb.122]
UDI: /org/freedesktop/Hal/devices/usb_device_8bb_2902_noserial_if0
Unique ID: FKGF.SeUlILtBEE3
Parent ID: pBe4.gkSaZmjGyhD
SysFS ID: /devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1:1.0
SysFS BusID: 2-1:1.0
Hardware Class: unknown
Model: "Texas Instruments USB Audio CODEC"
Hotplug: USB
Vendor: usb 0x08bb "Texas Instruments Japan"
Device: usb 0x2902 "USB Audio CODEC"
Revision: "1.00"
Driver: "snd-usb-audio"
Driver Modules: "snd_usb_audio"
Speed: 12 Mbps
Module Alias: "usb:v08BBp2902d0100dc00dsc00dp00ic01isc01ip00"
Driver Info #0:
Driver Status: snd_usb_audio is active
Driver Activation Cmd: "modprobe snd_usb_audio"
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #54 (Hub)
...
Can anyone help me? Any more info I should add?
Thanks.
