I am trying to follow these instructions. I get past step 1 and don't know how to do step 2? Can someone walk me through this please?
Step 1. unzip source code
tar xfvj alcsound.tar.bz2
Step 2. Turn on sound support (soundcore module, default turn on)
Step 3. Complied source code
a. ./configure
b. make
c. make install
d. ./snddevices
Step 4. Edit your /etc/modules.conf or conf.modules depending on the
distribution
(Please refer to the attached modules.conf)
Step 5. reboot your machine
Note: 1. The most detail information, can refer the
alsa-kernel/Documenttation/ALSA-Configuration.txt
in the alcsound.tar.bz2.
2. Kernel Version must be 2.2.14 or later.
3. All mixer channels are muted by default. You must use a native
or OSS mixer program to unmute appropriate channels.
4. If can not compile the source code, try to rename the
/usr/src/linux-2.x -> /usr/src/linux.
5. The driver added to support the SPDIF functoin.
6. Suggest use alsamixer to control mixer function. you can find it in
the alsa-utils-0.9.4 (
www.alsa-project.org).
ATTACHED MODULES.CONF
alias parport_lowlevel parport_pc
alias usb-controller usb-uhci
#alias sound-slot-0 via82cxxx_audio //remark this line, this is default
audio driver
#====== added those lines =============
alias char-major-116 snd
options snd major=116 cards_limit=1
#--- Intel 8x0 and SiS 7012 ----------
alias snd-card-0 snd-intel8x0
options snd-intel8x0 index=0 id="ICH"
#--- Via8233 Via686a -------------------------------
#alias snd-card-0 snd-via82xx
#options snd-via82xx index=0 id="VIA"
//=================================
alias char-major-14 soundcore
alias sound-slot-0 snd-card-0
alias sound-service-0-0 snd-mixer-oss
alias sound-service-0-1 snd-seq-oss
alias sound-service-0-3 snd-pcm-oss
alias sound-service-0-8 snd-seq-oss
alias sound-service-0-12 snd-pcm-oss
#=================================
post-install sound-slot-0 /bin/aumix-minimal -f /etc/.aumixrc -L
>/dev/null 2>&1 || :
pre-remove sound-slot-0 /bin/aumix-minimal -f /etc/.aumixrc -S
>/dev/null 2>&1 || :