Hi Guys,

after compiling into 2.6.22 kernel (slackware 11 was the base) I found mounting USB stick is really got messed up. just checked dmesg msg it shows that all the drivers loading perfectly (usb_storage, scsi drivers etc..) but no mounting pointing available such as NO /dev/sda or /dev/usb
I searched the /proc/bus/usb/devices it shows everything is fine

dmesg is

[72257.567785] hub 1-0:1.0: debounce: port 5: total 100ms stable 100ms status 0x100
[72258.861894] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0020
[72258.861921] ehci_hcd 0000:00:03.3: GetStatus port 5 status 001803 POWER sig=j CSC CONNECT
[72258.861934] hub 1-0:1.0: port 5, status 0501, change 0001, 480 Mb/s
[72258.981057] hub 1-0:1.0: debounce: port 5: total 100ms stable 100ms status 0x501
[72259.034675] ehci_hcd 0000:00:03.3: port 5 high speed
[72259.034687] ehci_hcd 0000:00:03.3: GetStatus port 5 status 001005 POWER sig=se0 PE CONNECT
[72259.087716] usb 1-5: new high speed USB device using ehci_hcd and address 11
[72259.141395] ehci_hcd 0000:00:03.3: port 5 high speed
[72259.141406] ehci_hcd 0000:00:03.3: GetStatus port 5 status 001005 POWER sig=se0 PE CONNECT
[72259.212390] usb 1-5: default language 0x0409
[72259.213894] usb 1-5: new device strings: Mfr=1, Product=2, SerialNumber=3
[72259.213901] usb 1-5: Product: DataTraveler 2.0
[72259.213904] usb 1-5: Manufacturer: Kingston
[72259.213906] usb 1-5: SerialNumber: 5B7519AC7AC7
[72259.213950] PM: Adding info for usb:1-5
[72259.213976] usb 1-5: uevent
[72259.214011] usb 1-5: usb_probe_device
[72259.214061] PM: Adding info for No Bus:usbdev1.11_ep00
[72259.214086] usb 1-5: configuration #1 chosen from 1 choice
[72259.214262] usb 1-5: adding 1-5:1.0 (config #1, interface 0)
[72259.214271] PM: Adding info for usb:1-5:1.0
[72259.214282] usb 1-5:1.0: uevent
[72259.214287] usb 1-5:1.0: uevent
[72259.214345] ub 1-5:1.0: usb_probe_interface
[72259.214353] ub 1-5:1.0: usb_probe_interface - got id
[72259.214382] usb-storage 1-5:1.0: usb_probe_interface
[72259.214400] usb-storage 1-5:1.0: usb_probe_interface - got id
[72259.214404] usb-storage: USB Mass Storage device detected
[72259.214508] usb-storage: -- associate_dev
[72259.214513] usb-storage: Vendor: 0x13fe, Product: 0x1d00, Revision: 0x0100
[72259.214516] usb-storage: Interface Subclass: 0x06, Protocol: 0x50
[72259.214522] usb-storage: Transport: Bulk
[72259.214526] usb-storage: Protocol: Transparent SCSI
[72259.214545] scsi6 : SCSI emulation for USB Mass Storage devices
[72259.214554] PM: Adding info for No Bus:host6
[72259.214606] usb-storage: *** thread sleeping.
[72259.214640] PM: Adding info for No Bus:usbdev1.11_ep81
[72259.214669] PM: Adding info for No Bus:usbdev1.11_ep02
[72259.214693] drivers/usb/core/inode.c: creating file '011'
[72259.214711] usb-storage: device found at 11
[72259.214714] usb-storage: waiting for device to settle before scanning


appreciate you guys help

Thanks
yzt

Before you plug in to the USB port, open a console and type (as root)
Code:

Once you've plugged in, the output in console will tell you where it is configured (eg sda1)

Sep 13 10:46:05 innovator kernel: [ 1390.451793] usb 1-5: new high speed USB device using ehci_hcd and address 4
Sep 13 10:46:05 innovator kernel: [ 1390.577965] usb 1-5: Product: DataTraveler 2.0
Sep 13 10:46:05 innovator kernel: [ 1390.577968] usb 1-5: Manufacturer: Kingston
Sep 13 10:46:05 innovator kernel: [ 1390.577971] usb 1-5: SerialNumber: 5B7519AC7AC7
Sep 13 10:46:05 innovator kernel: [ 1390.578146] usb 1-5: configuration #1 chosen from 1 choice
Sep 13 10:46:05 innovator kernel: [ 1390.580034] scsi1 : SCSI emulation for USB Mass Storage devices
Sep 13 10:46:10 innovator kernel: [ 1395.579902] scsi 1:0:0:0: Direct-Access Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 0 CCS
Sep 13 10:46:10 innovator kernel: [ 1395.581891] scsi 1:0:0:0: Attached scsi generic sg0 type 0


as indicate it was sg0 but I can not mount it error was

mount /dev/sg0 /mnt/sda1
mount: /dev/sg0 is not a block device

Unplug the device, then plug it in again, then look in /dev with your file manager and see if you have any sda* or sdb* device listed. If yes, mount it

only change I see in the dev is 1-3 and sg0

I wonder whether I have to add some rules to /etc/udev/rules.d