aletta |
12-31-2011 09:41 PM |
after dmesg:
Quote:
2aaa0 error 6 in libpthread-2.12.so[3432c00000+17000]
usb 2-7: new full speed USB device using ohci_hcd and address 5
usb 2-7: New USB device found, idVendor=056a, idProduct=00dd
usb 2-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-7: Product: CTL-470
usb 2-7: Manufacturer: Wacom Co.,Ltd.
usb 2-7: configuration #1 chosen from 1 choice
usb 2-7: USB disconnect, address 5
usb 2-7: new full speed USB device using ohci_hcd and address 6
usb 2-7: New USB device found, idVendor=056a, idProduct=00dd
usb 2-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-7: Product: CTL-470
usb 2-7: Manufacturer: Wacom Co.,Ltd.
usb 2-7: configuration #1 chosen from 1 choice
[aletteke@localhost ~]$
|
the tablet still does not work although correctly identified
Quote:
Bus 002 Device 006: ID 056a:00dd Wacom Co., Ltd
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 32
idVendor 0x056a Wacom Co., Ltd
idProduct 0x00dd
bcdDevice 1.02
iManufacturer 1 Wacom Co.,Ltd.
iProduct 2 CTL-470
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 59
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 98mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 1 Boot Interface Subclass
bInterfaceProtocol 2 Mouse
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.10
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 184
Report Descriptor: (length is 184)
Item(Global): Usage Page, data= [ 0x01 ] 1
Generic Desktop Controls
Item(Local ): Usage, data= [ 0x02 ] 2
Mouse
Item(Main ): Collection, data= [ 0x01 ] 1
Application
Item(Global): Report ID, data= [ 0x01 ] 1
Item(Local ): Usage, data= [ 0x01 ] 1
Pointer
Item(Main ): Collection, data= [ 0x00 ] 0
Physical
Item(Global): Usage Page, data= [ 0x09 ] 9
Buttons
Item(Local ): Usage Minimum, data= [ 0x01 ] 1
Button 1 (Primary)
Item(Local ): Usage Maximum, data= [ 0x05 ] 5
Button 5
Item(Global): Logical Minimum, data= [ 0x00 ] 0
Item(Global): Logical Maximum, data= [ 0x01 ] 1
Item(Global): Report Count, data= [ 0x05 ] 5
Item(Global): Report Size, data= [ 0x01 ] 1
Item(Main ): Input, data= [ 0x02 ] 2
Data Variable Absolute No_Wrap Linear
Preferred_State No_Null_Position Non_Volatile Bitfield
Item(Global): Report Count, data= [ 0x01 ] 1
Item(Global): Report Size, data= [ 0x03 ] 3
Item(Main ): Input, data= [ 0x01 ] 1
Constant Array Absolute No_Wrap Linear
Preferred_State No_Null_Position Non_Volatile Bitfield
Item(Global): Usage Page, data= [ 0x01 ] 1
Generic Desktop Controls
Item(Local ): Usage, data= [ 0x30 ] 48
Direction-X
Item(Local ): Usage, data= [ 0x31 ] 49
Direction-Y
Item(Global): Logical Minimum, data= [ 0x81 ] 129
Item(Global): Logical Maximum, data= [ 0x7f ] 127
Item(Global): Report Size, data= [ 0x08 ] 8
Item(Global): Report Count, data= [ 0x02 ] 2
Item(Main ): Input, data= [ 0x06 ] 6
Data Variable Relative No_Wrap Linear
Preferred_State No_Null_Position Non_Volatile Bitfield
Item(Main ): End Collection, data=none
Item(Main ): End Collection, data=none
Item(Global): Usage Page, data= [ 0x0d ] 13
Digitizer
Item(Local ): Usage, data= [ 0x01 ] 1
Digitizer
Item(Main ): Collection, data= [ 0x01 ] 1
Application
Item(Global): Report ID, data= [ 0x02 ] 2
Item(Main ): Collection, data= [ 0x00 ] 0
Physical
Item(Global): Usage Page, data= [ 0x00 0xff ] 65280
(null)
Item(Local ): Usage, data= [ 0x01 ] 1
(null)
Item(Global): Logical Minimum, data= [ 0x00 ] 0
Item(Global): Logical Maximum, data= [ 0xff 0x00 ] 255
Item(Global): Report Size, data= [ 0x08 ] 8
Item(Global): Report Count, data= [ 0x09 ] 9
Item(Main ): Input, data= [ 0x02 ] 2
Data Variable Absolute No_Wrap Linear
Preferred_State No_Null_Position Non_Volatile Bitfield
Item(Main ): End Collection, data=none
Item(Local ): Usage, data= [ 0x01 ] 1
(null)
Item(Global): Report ID, data= [ 0x02 ] 2
Item(Global): Report Count, data= [ 0x01 ] 1
Item(Main ): Feature, data= [ 0x02 ] 2
Data Variable Absolute No_Wrap Linear
Preferred_State No_Null_Position Non_Volatile Bitfield
Item(Local ): Usage, data= [ 0x01 ] 1
(null)
Item(Global): Report ID, data= [ 0x03 ] 3
Item(Global): Report Count, data= [ 0x01 ] 1
Item(Main ): Feature, data= [ 0x02 ] 2
Data Variable Absolute No_Wrap Linear
Preferred_State No_Null_Position Non_Volatile Bitfield
Item(Local ): Usage, data= [ 0x01 ] 1
(null)
Item(Global): Report ID, data= [ 0x04 ] 4
Item(Global): Report Count, data= [ 0x01 ] 1
Item(Main ): Feature, data= [ 0x02 ] 2
Data Variable Absolute No_Wrap Linear
Preferred_State No_Null_Position Non_Volatile Bitfield
Item(Local ): Usage, data= [ 0x01 ] 1
(null)
Item(Global): Report ID, data= [ 0x05 ] 5
Item(Global): Report Count, data= [ 0x01 ] 1
Item(Main ): Feature, data= [ 0x02 ] 2
Data Variable Absolute No_Wrap Linear
Preferred_State No_Null_Position Non_Volatile Bitfield
Item(Local ): Usage, data= [ 0x01 ] 1
(null)
Item(Global): Report ID, data= [ 0x10 ] 16
Item(Global): Report Count, data= [ 0x02 ] 2
Item(Main ): Feature, data= [ 0x02 ] 2
Data Variable Absolute No_Wrap Linear
Preferred_State No_Null_Position Non_Volatile Bitfield
Item(Local ): Usage, data= [ 0x01 ] 1
(null)
Item(Global): Report ID, data= [ 0x11 ] 17
Item(Global): Report Count, data= [ 0x10 ] 16
Item(Main ): Feature, data= [ 0x02 ] 2
Data Variable Absolute No_Wrap Linear
Preferred_State No_Null_Position Non_Volatile Bitfield
Item(Local ): Usage, data= [ 0x01 ] 1
(null)
Item(Global): Report ID, data= [ 0x13 ] 19
Item(Global): Report Count, data= [ 0x01 ] 1
Item(Main ): Feature, data= [ 0x02 ] 2
Data Variable Absolute No_Wrap Linear
Preferred_State No_Null_Position Non_Volatile Bitfield
Item(Local ): Usage, data= [ 0x01 ] 1
(null)
Item(Global): Report ID, data= [ 0x20 ] 32
Item(Global): Report Count, data= [ 0x01 ] 1
Item(Main ): Feature, data= [ 0x02 ] 2
Data Variable Absolute No_Wrap Linear
Preferred_State No_Null_Position Non_Volatile Bitfield
Item(Local ): Usage, data= [ 0x01 ] 1
(null)
Item(Global): Report ID, data= [ 0x21 ] 33
Item(Global): Report Count, data= [ 0x01 ] 1
Item(Main ): Feature, data= [ 0x02 ] 2
Data Variable Absolute No_Wrap Linear
Preferred_State No_Null_Position Non_Volatile Bitfield
Item(Local ): Usage, data= [ 0x01 ] 1
(null)
Item(Global): Report ID, data= [ 0x14 ] 20
Item(Global): Report Count, data= [ 0x1f ] 31
Item(Main ): Feature, data= [ 0x02 ] 2
Data Variable Absolute No_Wrap Linear
Preferred_State No_Null_Position Non_Volatile Bitfield
Item(Local ): Usage, data= [ 0x01 ] 1
(null)
Item(Global): Report ID, data= [ 0x30 ] 48
Item(Global): Report Count, data= [ 0x01 ] 1
Item(Main ): Feature, data= [ 0x1f ] 31
Constant Variable Relative Wrap Non_Linear
Preferred_State No_Null_Position Non_Volatile Bitfield
Item(Local ): Usage, data= [ 0x01 ] 1
(null)
Item(Global): Report ID, data= [ 0x31 ] 49
Item(Global): Report Count, data= [ 0x04 ] 4
Item(Main ): Feature, data= [ 0x1f ] 31
Constant Variable Relative Wrap Non_Linear
Preferred_State No_Null_Position Non_Volatile Bitfield
Item(Global): Report ID, data= [ 0xc0 ] 192
Item(Local ): Usage, data= [ 0x00 ] 0
(null)
Item(Global): Report Count, data= [ 0x09 ] 9
Item(Main ): Input, data= [ 0x02 ] 2
Data Variable Absolute No_Wrap Linear
Preferred_State No_Null_Position Non_Volatile Bitfield
Item(Main ): End Collection, data=none
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x000a 1x 10 bytes
bInterval 2
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 0 No Subclass
bInterfaceProtocol 0 None
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.10
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 29
Report Descriptor: (length is 29)
Item(Global): Usage Page, data= [ 0x00 0xff ] 65280
(null)
Item(Local ): Usage, data= [ 0x80 ] 128
(null)
Item(Main ): Collection, data= [ 0x02 ] 2
Logical
Item(Global): Report ID, data= [ 0x02 ] 2
Item(Global): Report Size, data= [ 0x08 ] 8
Item(Global): Report Count, data= [ 0x3f ] 63
Item(Global): Logical Minimum, data= [ 0x00 ] 0
Item(Global): Logical Maximum, data= [ 0x00 0x10 ] 4096
Item(Main ): Input, data= [ 0x01 ] 1
Constant Array Absolute No_Wrap Linear
Preferred_State No_Null_Position Non_Volatile Bitfield
Item(Global): Report ID, data= [ 0x03 ] 3
Item(Global): Report Size, data= [ 0x08 ] 8
Item(Global): Report Count, data= [ 0x3f ] 63
Item(Main ): Input, data= [ 0x01 ] 1
Constant Array Absolute No_Wrap Linear
Preferred_State No_Null_Position Non_Volatile Bitfield
Item(Main ): End Collection, data=none
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 2
Device Status: 0x0000
(Bus Powered)
[aletteke@localhost ~]$ 2aaa0 error 6 in libpthread-2.12.so[3432c00000+17000]
bash: 2aaa0: command not found
[aletteke@localhost ~]$ usb 2-7: new full speed USB device using ohci_hcd and address 5
bash: usb: command not found
[aletteke@localhost ~]$ usb 2-7: New USB device found, idVendor=056a, idProduct=00dd
bash: usb: command not found
[aletteke@localhost ~]$ usb 2-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
bash: usb: command not found
[aletteke@localhost ~]$ usb 2-7: Product: CTL-470
bash: usb: command not found
[aletteke@localhost ~]$ usb 2-7: Manufacturer: Wacom Co.,Ltd.
bash: usb: command not found
[aletteke@localhost ~]$ usb 2-7: configuration #1 chosen from 1 choice
bash: usb: command not found
[aletteke@localhost ~]$ usb 2-7: USB disconnect, address 5
bash: usb: command not found
[aletteke@localhost ~]$ usb 2-7: new full speed USB device using ohci_hcd and address 6
bash: usb: command not found
[aletteke@localhost ~]$ usb 2-7: New USB device found, idVendor=056a, idProduct=00dd
bash: usb: command not found
[aletteke@localhost ~]$ usb 2-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
bash: usb: command not found
[aletteke@localhost ~]$ usb 2-7: Product: CTL-470
bash: usb: command not found
[aletteke@localhost ~]$ usb 2-7: Manufacturer: Wacom Co.,Ltd.
bash: usb: command not found
[aletteke@localhost ~]$ usb 2-7: configuration #1 chosen from 1 choice
bash: usb: command not found
[aletteke@localhost ~]$ [aletteke@localhost ~]$
bash: [aletteke@localhost: command not found
[aletteke@localhost ~]$ 2aaa0 error 6 in libpthread-2.12.so[3432c00000+17000]
bash: 2aaa0: command not found
[aletteke@localhost ~]$ usb 2-7: new full speed USB device using ohci_hcd and address 5
bash: usb: command not found
[aletteke@localhost ~]$ usb 2-7: New USB device found, idVendor=056a, idProduct=00dd
bash: usb: command not found
[aletteke@localhost ~]$ usb 2-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
bash: usb: command not found
[aletteke@localhost ~]$ usb 2-7: Product: CTL-470
bash: usb: command not found
[aletteke@localhost ~]$ usb 2-7: Manufacturer: Wacom Co.,Ltd.
bash: usb: command not found
[aletteke@localhost ~]$ usb 2-7: configuration #1 chosen from 1 choice
bash: usb: command not found
[aletteke@localhost ~]$ usb 2-7: USB disconnect, address 5
bash: usb: command not found
[aletteke@localhost ~]$ usb 2-7: new full speed USB device using ohci_hcd and address 6
bash: usb: command not found
[aletteke@localhost ~]$ usb 2-7: New USB device found, idVendor=056a, idProduct=00dd
bash: usb: command not found
[aletteke@localhost ~]$ usb 2-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
bash: usb: command not found
[aletteke@localhost ~]$ usb 2-7: Product: CTL-470
bash: usb: command not found
[aletteke@localhost ~]$ usb 2-7: Manufacturer: Wacom Co.,Ltd.
bash: usb: command not found
[aletteke@localhost ~]$ usb 2-7: configuration #1 chosen from 1 choice
bash: usb: command not found
[aletteke@localhost ~]$ [aletteke@localhost ~]$
bash: [aletteke@localhost: command not found
[aletteke@localhost ~]$ 2aaa0 error 6 in libpthread-2.12.so[3432c00000+17000]
bash: 2aaa0: command not found
[aletteke@localhost ~]$ usb 2-7: new full speed USB device using ohci_hcd and address 5
bash: usb: command not found
[aletteke@localhost ~]$ usb 2-7: New USB device found, idVendor=056a, idProduct=00dd
bash: usb: command not found
[aletteke@localhost ~]$ usb 2-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
bash: usb: command not found
[aletteke@localhost ~]$ usb 2-7: Product: CTL-470
bash: usb: command not found
[aletteke@localhost ~]$ usb 2-7: Manufacturer: Wacom Co.,Ltd.
bash: usb: command not found
[aletteke@localhost ~]$ usb 2-7: configuration #1 chosen from 1 choice
bash: usb: command not found
[aletteke@localhost ~]$ usb 2-7: USB disconnect, address 5
bash: usb: command not found
[aletteke@localhost ~]$ usb 2-7: new full speed USB device using ohci_hcd and address 6
bash: usb: command not found
[aletteke@localhost ~]$ usb 2-7: New USB device found, idVendor=056a, idProduct=00dd
bash: usb: command not found
[aletteke@localhost ~]$ usb 2-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
bash: usb: command not found
[aletteke@localhost ~]$ usb 2-7: Product: CTL-470
bash: usb: command not found
[aletteke@localhost ~]$ usb 2-7: Manufacturer: Wacom Co.,Ltd.
bash: usb: command not found
[aletteke@localhost ~]$ usb 2-7: configuration #1 chosen from 1 choice
bash: usb: command not found
[aletteke@localhost ~]$ [aletteke@localhost ~]$
bash: [aletteke@localhost: command not found
[aletteke@localhost ~]$ 2aaa0 error 6 in libpthread-2.12.so[3432c00000+17000]
bash: 2aaa0: command not found
[aletteke@localhost ~]$ usb 2-7: new full speed USB device using ohci_hcd and address 5
bash: usb: command not found
[aletteke@localhost ~]$ usb 2-7: New USB device found, idVendor=056a, idProduct=00dd
bash: usb: command not found
[aletteke@localhost ~]$ usb 2-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
bash: usb: command not found
[aletteke@localhost ~]$ usb 2-7: Product: CTL-470
bash: usb: command not found
[aletteke@localhost ~]$ usb 2-7: Manufacturer: Wacom Co.,Ltd.
bash: usb: command not found
[aletteke@localhost ~]$ usb 2-7: configuration #1 chosen from 1 choice
bash: usb: command not found
[aletteke@localhost ~]$ usb 2-7: USB disconnect, address 5
bash: usb: command not found
[aletteke@localhost ~]$ usb 2-7: new full speed USB device using ohci_hcd and address 6
bash: usb: command not found
[aletteke@localhost ~]$ usb 2-7: New USB device found, idVendor=056a, idProduct=00dd
bash: usb: command not found
[aletteke@localhost ~]$ usb 2-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
bash: usb: command not found
[aletteke@localhost ~]$ usb 2-7: Product: CTL-470
bash: usb: command not found
[aletteke@localhost ~]$ usb 2-7: Manufacturer: Wacom Co.,Ltd.
bash: usb: command not found
[aletteke@localhost ~]$ usb 2-7: configuration #1 chosen from 1 choice
bash: usb: command not found
[aletteke@localhost ~]$ [aletteke@localhost ~]$
bash: [aletteke@localhost: command not found
|
I appreciated some extra eyes on thes. Yesterday I removed what ourput said was an incorrect driver and fatal error, nstalled some older version of wacom drivers, not meant for this tablet but still I have read of others getting them to work. Wish I could get my ps2 mouse recognised and could ditch the second mouse,less printout to go through.
Incidentally happy new year.
|