computer does not recognize wireless card WPC11 ver 4
Hello,
I am running ubuntu 8.04. I have a linksys wireless card WPC11 ver4 which the computer does not recognize. There is nothing wrong with the card as it works with windows XP. Is there a solution? thank you |
Please post the output of
Code:
lspci|grep Net |
I am just new on ubuntu, I had a similar problem and ubuntu was not recognising my wireless card. I connected directly (wired) to the internet and run updates. It was fix after that. hope this help
|
output to code
clemenxe@clemenxe-laptop:~$ lspci|grep Net
clemenxe@clemenxe-laptop:~$ lsmod Module Size Used by snd_rtctimer 4640 1 ipv6 267908 8 binfmt_misc 12808 1 af_packet 23812 2 rfcomm 41744 2 l2cap 25728 13 rfcomm bluetooth 61028 4 rfcomm,l2cap ppdev 10372 0 speedstep_ich 6288 0 speedstep_lib 6532 1 speedstep_ich cpufreq_powersave 2688 0 cpufreq_conservative 8712 0 cpufreq_userspace 5284 0 cpufreq_ondemand 9740 1 cpufreq_stats 7104 0 freq_table 5536 3 speedstep_ich,cpufreq_ondemand,cpufreq_stats container 5632 0 sbs 15112 0 sbshc 7680 1 sbs dock 11280 0 iptable_filter 3840 0 ip_tables 14820 1 iptable_filter x_tables 16132 1 ip_tables aes_i586 33536 0 dm_crypt 15364 0 dm_mod 62660 1 dm_crypt sbp2 24072 0 lp 12324 0 pcmcia 40876 0 joydev 13120 0 snd_intel8x0 35356 3 snd_ac97_codec 101028 1 snd_intel8x0 ac97_bus 3072 1 snd_ac97_codec snd_pcm_oss 42144 0 snd_mixer_oss 17920 1 snd_pcm_oss snd_pcm 78596 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss snd_seq_dummy 4868 0 i2c_core 24832 0 yenta_socket 27276 3 rsrc_nonstatic 13696 1 yenta_socket pcmcia_core 40596 3 pcmcia,yenta_socket,rsrc_nonstatic video 19856 0 output 4736 1 video snd_seq_oss 35584 0 snd_seq_midi 9376 0 snd_rawmidi 25760 1 snd_seq_midi snd_seq_midi_event 8320 2 snd_seq_oss,snd_seq_midi snd_seq 54224 7 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event snd_timer 24836 3 snd_rtctimer,snd_pcm,snd_seq snd_seq_device 9612 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq serio_raw 7940 0 intel_rng 6528 0 button 9232 0 battery 14212 0 snd 56996 19 snd_rtctimer,snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_dummy,snd_seq_oss ,snd_rawmidi,snd_seq,snd_timer,snd_seq_device soundcore 8800 1 snd ac 6916 0 intel_agp 25492 1 snd_page_alloc 11400 2 snd_intel8x0,snd_pcm agpgart 34760 1 intel_agp iTCO_wdt 13092 0 iTCO_vendor_support 4868 1 iTCO_wdt dcdbas 9504 0 shpchp 34452 0 pci_hotplug 30880 1 shpchp parport_pc 36260 1 parport 37832 3 ppdev,lp,parport_pc evdev 13056 6 pcspkr 4224 0 psmouse 40336 0 ext3 136840 1 jbd 48404 1 ext3 mbcache 9600 1 ext3 sg 36880 0 sr_mod 17956 1 cdrom 37408 1 sr_mod sd_mod 30720 3 ata_piix 19588 3 ata_generic 8324 0 floppy 59588 0 pata_acpi 8320 0 ohci1394 33584 0 ieee1394 93752 2 sbp2,ohci1394 libata 159600 3 ata_piix,ata_generic,pata_acpi 3c59x 46376 0 mii 6400 1 3c59x uhci_hcd 27024 0 scsi_mod 151436 5 sbp2,sg,sr_mod,sd_mod,libata usbcore 146412 2 uhci_hcd thermal 16796 0 processor 36488 2 thermal fan 5636 0 fbcon 42912 0 tileblit 3456 1 fbcon font 9472 1 fbcon bitblit 6784 1 fbcon softcursor 3072 1 bitblit fuse 50708 3 clemenxe@clemenxe-laptop:~$ ifconfig eth0 Link encap:Ethernet HWaddr 00:08:74:3e:3a:c9 inet addr:192.168.1.102 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::208:74ff:fe3e:3ac9/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:872 errors:0 dropped:0 overruns:0 frame:0 TX packets:949 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:758266 (740.4 KB) TX bytes:191191 (186.7 KB) Interrupt:11 Base address:0xcc00 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:2710 errors:0 dropped:0 overruns:0 frame:0 TX packets:2710 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:135500 (132.3 KB) TX bytes:135500 (132.3 KB) clemenxe@clemenxe-laptop:~$ |
Strange; could you do
Code:
lspci |
Tried running updates, no luck.
lspci gives this: clemenxe@clemenxe-laptop:~$ lspci 00:00.0 Host bridge: Intel Corporation 82845 845 [Brookdale] Chipset Host Bridge (rev 04) 00:01.0 PCI bridge: Intel Corporation 82845 845 [Brookdale] Chipset AGP Bridge (rev 04) 00:1d.0 USB Controller: Intel Corporation 82801CA/CAM USB Controller #1 (rev 02) 00:1d.2 USB Controller: Intel Corporation 82801CA/CAM USB Controller #3 (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 42) 00:1f.0 ISA bridge: Intel Corporation 82801CAM ISA Bridge (LPC) (rev 02) 00:1f.1 IDE interface: Intel Corporation 82801CAM IDE U100 Controller (rev 02) 00:1f.5 Multimedia audio controller: Intel Corporation 82801CA/CAM AC'97 Audio Controller (rev 02) 00:1f.6 Modem: Intel Corporation 82801CA/CAM AC'97 Modem Controller (rev 02) 01:00.0 VGA compatible controller: nVidia Corporation NV17 [GeForce4 440 Go] (rev a3) 02:00.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 78) 02:01.0 CardBus bridge: Texas Instruments PCI4451 PC card Cardbus Controller 02:01.1 CardBus bridge: Texas Instruments PCI4451 PC card Cardbus Controller 02:01.2 FireWire (IEEE 1394): Texas Instruments PCI4451 IEEE-1394 Controller 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8180L 802.11b MAC (rev 20) |
Is the wireless card plugged in and turned on? It isn't be shown up, you see.
Find the wireless kill switch, then give us the output of Code:
dmesg|tail |
The wireless card turns on automatically when I put it into the slot.
here is what I get [ 56.209119] Bluetooth: RFCOMM TTY layer initialized [ 56.209123] Bluetooth: RFCOMM ver 1.8 [ 81.546965] NET: Registered protocol family 17 [ 62.253817] NET: Registered protocol family 10 [ 62.254623] lo: Disabled Privacy Extensions [ 99.216410] eth0: no IPv6 routers present [ 281.718155] eth0: setting full-duplex. [ 281.723952] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 212.790992] eth0: no IPv6 routers present [ 2243.848024] pccard: card ejected from slot 0 |
You didn't say it was pcmcia. Fine;
Code:
pcmcia |
clemenxe@clemenxe-laptop:~$
clemenxe@clemenxe-laptop:~$ pcmcia bash: pcmcia: command not found |
Code:
lspcmcia |
lemenxe@clemenxe-laptop:~$ lspcmcia
Socket 0 Bridge: [yenta_cardbus] (bus ID: 0000:02:01.0) Socket 1 Bridge: [yenta_cardbus] (bus ID: 0000:02:01.1) clemenxe@clemenxe-laptop:~$ |
Is it plugged in?
|
it wasn't before. With it plugged in I get this
clemenxe@clemenxe-laptop:~$ lspcmcia Socket 0 Bridge: [yenta_cardbus] (bus ID: 0000:02:01.0) CardBus card -- see "lspci" for more information Socket 1 Bridge: [yenta_cardbus] (bus ID: 0000:02:01.1) clemenxe@clemenxe-laptop:~$ |
Was it plugged in when you did any of the other stuff? Like lspci? It seems to suggest an entry may be in there.
|
All times are GMT -5. The time now is 09:11 PM. |