LinuxQuestions.org

LinuxQuestions.org (/questions/)
-   Linux - Newbie (https://www.linuxquestions.org/questions/linux-newbie-8/)
-   -   Can't install Fedora alongside Ubuntu (https://www.linuxquestions.org/questions/linux-newbie-8/cant-install-fedora-alongside-ubuntu-932583/)

Wiking 03-03-2012 07:22 PM

Can't install Fedora alongside Ubuntu
 
Hi, I have a dual setup with W7 and Ubuntu.

On Grub I have Ubuntu, Kubuntu, and Mint, I wanted to add Fedora but had some problems with the partition. The image below is of my drive and it's partitions.

http://i41.tinypic.com/2eckfvn.png


I was hoping that I could continue to install more Linux distributions on the extended drive using what free space was available (80 GB), but when I go to make the / partition for Fedora during installation the drive appears as 'sdc4' instead of 'sdc12' and when I go to make the /home partition it creates it on a separate drive (sda).

What can I do? Can I somehow install Fedora on sdc and use the free space? I'd like to keep all my OS's on one drive.

Thanks.

syg00 03-03-2012 08:48 PM

Grow the extended partition (/dev/sdc3) to incorporate all the free space. Then try the Fedora install - you may have to use the "expert partitioning option. Personally I always pre-allocate the partitions before the install, then just assign mountpoints in the partitioning phase of the install.
Fedora always tries to utilize a primary partition - in your current setup it can, then there is no space left. Anaconda has its limitations, like all installers.

Wiking 03-04-2012 12:58 AM

The partition manager won't let me grow the extended partition. It will only allow me to shrink or move the logical volumes.

As for the free space the only options it gives me is to make it a new primary partition.

Could I make that unallocated space into a EXT4 primary partition, split it, install both Fedora / and /home on it (sdc4) and I'll install the boot loader into (sdc2). Would that work?

syg00 03-04-2012 01:01 AM

Use gparted. You can install it as an application, or go get the liveCD.

Wiking 03-04-2012 10:48 PM

Gparted also won't allow me to resize the extended partition. It has a small lock beside it: http://i44.tinypic.com/34ysm5v.png

yancek 03-05-2012 10:09 AM

That should not happen if you are using GParted from a LiveCD. Read the link below:

http://askubuntu.com/questions/51272...n-with-gparted

Wiking 03-05-2012 12:13 PM

Thanks, I was able to resize the extended partition.

I ran into something else when installing Fedora, that it would only allow me to install the boot loader in the MBR of sdb1, my grub is located on sdb2, i went ahead and installed the / and /home for Fedora.

Will a simple grub-update make it possible to boot in Fedora, or how else could i get the boot loader onto sdb2 which has the boot loaders for all my other distros.

thanks,

Well I updated grub but when I tried starting Fedora I got a root device error because I couldn't install the boot loader onto sdb2.

yancek 03-05-2012 01:59 PM

Quote:

I ran into something else when installing Fedora, that it would only allow me to install the boot loader in the MBR of sdb1
Is sdb1 your / partition for Fedora?
Is sdb2 a separate /boot partition for all systems?
The MBR is not on any partition. It is at the beginning of the disk before partitions.
Which bootloader (Ubuntu, Mint, etc...) is actually in the MBR?
Do you still have all four systems installed?

Wiking 03-05-2012 02:38 PM

This is a screenshot after install Fedora: http://i44.tinypic.com/zl2mw2.png

sdb13 is / for Fedora.

sdb14 is the /home folder for Fedora.

Yes sdb2 is a separate /boot partition for all the systems.

When I boot I can choose between Windows and Linux, if I choose Linux, then it takes me to Grub where I can choose between the distros. All the boot loaders for the distros are installed on sdb2.

The Linux systems installed are ubuntu, kubuntu, mint, and fedora, but can't boot fedora. The installer wouldn't let me choose sdb2 to install the boot loader, it wanted to install it somewhere else.

yancek 03-05-2012 06:10 PM

Quote:

The installer wouldn't let me choose sdb2 to install the boot loader, it wanted to install it somewhere else.
Where? Was this during the installation? If it didn't install Grub anywhere, you would need to update the Grub from whichever system you are using to boot your Linux distributions and have the grub.cfg entry pointing to the Fedora kernel. I'm not sure I'm really understanding your setup. You might try going to the site in the link below and downloading and running the bootinfoscript. You could review that or post it here as it will contain a lot of useful information on your bootloader and partitions and someone should be able to point you to the source of the problem.

Wiking 03-07-2012 09:42 AM

It wanted to install it on the Windows partition, yes it was during installation after I had created the / and /home partitions for Fedora.

I updated grub in Kubuntu after installing, it recognized Fedora and it shows up in Grub but I get a 'root device error' after selecting it.

As for my setup I used Easy BCD program for windows so I can load either Windows or the Grub menu. I hope that helps.

Where is the link?

yancek 03-07-2012 09:51 AM

Sorry, forgot the link to bootinfoscript:

http://sourceforge.net/projects/bootinfoscript/

Quote:

It wanted to install it on the Windows partition,
What? The Fedora bootloader? That would not be a good idea. What is the "root device error"? Post the complete output and post the results.txt file after running the script above.

Wiking 03-07-2012 11:59 AM

Here are the RESULTS:

Code:

                  Boot Info Script 0.60    from 17 May 2011


============================= Boot Info Summary: ===============================

 => Windows is installed in the MBR of /dev/sda.
 => Grub2 (v1.97-1.98) is installed in the MBR of /dev/sdb and looks at sector
    1 of the same hard drive for core.img. core.img is at this location and
    looks in partition 8 for /boot/grub.
 => Windows is installed in the MBR of /dev/sdc.
 => Grub2 (v1.97-1.98) is installed in the MBR of /dev/sdd and looks at sector
    1 of the same hard drive for core.img. core.img is at this location and
    looks in partition 8 for /boot/grub.
 => Windows is installed in the MBR of /dev/mapper/isw_biccaegiee_Volume0.

sda1: __________________________________________________________________________

    File system:      ntfs
    Boot sector type:  Windows Vista/7
    Boot sector info:  No errors found in the Boot Parameter Block.
    Mounting failed:  fuse: mount failed: Device or resource busy
fuse: mount failed: Device or resource busy

sdb1: __________________________________________________________________________

    File system:      ntfs
    Boot sector type:  Windows Vista/7
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  Windows 7
    Boot files:        /Windows/System32/winload.exe

sdb2: __________________________________________________________________________

    File system:      ext4
    Boot sector type:  Grub2 (v1.99)
    Boot sector info:  Grub2 (v1.99) is installed in the boot sector of sdb2
                      and looks at sector 500498528 of the same hard drive
                      for core.img. core.img is at this location and looks
                      for ?? on this drive.
    Operating System: 
    Boot files:        /grub/grub.cfg /grub/core.img

sdb3: __________________________________________________________________________

    File system:      Extended Partition
    Boot sector type:  Unknown
    Boot sector info: 

sdb5: __________________________________________________________________________

    File system:      swap
    Boot sector type:  -
    Boot sector info: 

sdb6: __________________________________________________________________________

    File system:      ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 11.10
    Boot files:        /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img

sdb7: __________________________________________________________________________

    File system:      ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System: 
    Boot files:       

sdb8: __________________________________________________________________________

    File system:      swap
    Boot sector type:  -
    Boot sector info: 

sdb9: __________________________________________________________________________

    File system:      ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Linux Mint 10 Julia
    Boot files:        /boot/grub/grub.cfg /etc/fstab

sdb10: _________________________________________________________________________

    File system:      ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System: 
    Boot files:       

sdb11: _________________________________________________________________________

    File system:      ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 11.10
    Boot files:        /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img

sdb12: _________________________________________________________________________

    File system:      ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System: 
    Boot files:       

sdb13: _________________________________________________________________________

    File system:      ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Fedora release 16 (Verne)
                      Kernel on an ()
    Boot files:        /etc/fstab

sdb14: _________________________________________________________________________

    File system:      ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System: 
    Boot files:       

sdc1: __________________________________________________________________________

    File system:      ntfs
    Boot sector type:  Windows Vista/7
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System: 
    Boot files:       

sdd1: __________________________________________________________________________

    File system:      ntfs
    Boot sector type:  Windows Vista/7
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System: 
    Boot files:       

sdd2: __________________________________________________________________________

    File system:      Extended Partition
    Boot sector type:  -
    Boot sector info: 

sdd5: __________________________________________________________________________

    File system:      ntfs
    Boot sector type:  Windows XP
    Boot sector info:  According to the info in the boot sector, sdd5 starts
                      at sector 63.
    Operating System: 
    Boot files:       

isw_biccaegiee_Volume01: _______________________________________________________

    File system:     
    Boot sector type:  Unknown
    Boot sector info: 
    Mounting failed:  fuse: mount failed: Device or resource busy
fuse: mount failed: Device or resource busy
mount: unknown filesystem type ''

============================ Drive/Partition Info: =============================

Drive: sda _____________________________________________________________________

Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1    *          2,048 1,953,521,663 1,953,519,616  7 NTFS / exFAT / HPFS


Drive: sdb _____________________________________________________________________

Disk /dev/sdb: 360.1 GB, 360080695296 bytes
255 heads, 63 sectors/track, 43777 cylinders, total 703282608 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sdb1              2,048  370,028,543  370,026,496  7 NTFS / exFAT / HPFS
/dev/sdb2    *    370,028,544  371,982,335    1,953,792  83 Linux
/dev/sdb3        371,984,382  703,281,151  331,296,770  5 Extended
/dev/sdb5        371,984,384  377,841,663    5,857,280  82 Linux swap / Solaris
/dev/sdb6        377,843,712  416,903,167    39,059,456  83 Linux
/dev/sdb7        416,905,216  434,481,151    17,575,936  83 Linux
/dev/sdb8        434,483,200  440,340,479    5,857,280  82 Linux swap / Solaris
/dev/sdb9        440,342,528  479,401,983    39,059,456  83 Linux
/dev/sdb10        479,404,032  498,933,759    19,529,728  83 Linux
/dev/sdb11        498,935,808  528,230,399    29,294,592  83 Linux
/dev/sdb12        528,232,448  541,902,847    13,670,400  83 Linux
/dev/sdb13        541,904,896  572,624,895    30,720,000  83 Linux
/dev/sdb14        572,626,944  580,818,943    8,192,000  83 Linux


Drive: sdc _____________________________________________________________________

Disk /dev/sdc: 640.1 GB, 640135028736 bytes
255 heads, 63 sectors/track, 77825 cylinders, total 1250263728 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sdc1              2,048 1,250,260,991 1,250,258,944  7 NTFS / exFAT / HPFS


Drive: sdd _____________________________________________________________________

Disk /dev/sdd: 360.1 GB, 360080695296 bytes
255 heads, 63 sectors/track, 43777 cylinders, total 703282608 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sdd1              2,048  215,042,047  215,040,000  7 NTFS / exFAT / HPFS
/dev/sdd2        215,046,090  320,223,644  105,177,555  f W95 Extended (LBA)
/dev/sdd5        215,046,153  320,223,644  105,177,492  7 NTFS / exFAT / HPFS


Drive: isw_biccaegiee_Volume0 _____________________________________________________________________

Disk /dev/mapper/isw_biccaegiee_Volume0: 1000.2 GB, 1000202178560 bytes
255 heads, 63 sectors/track, 121600 cylinders, total 1953519880 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/mapper/isw_biccaegiee_Volume01  *          2,048 1,953,521,663 1,953,519,616  7 NTFS / exFAT / HPFS

/dev/mapper/isw_biccaegiee_Volume01 ends after the last sector of /dev/mapper/isw_biccaegiee_Volume0

"blkid" output: ________________________________________________________________

Device          UUID                                  TYPE      LABEL

/dev/sda1        26F02DD3F02DAA4F                      ntfs      CaviarBlack
/dev/sdb1        5894D50594D4E692                      ntfs     
/dev/sdb10      85d2b1dd-14fa-4880-ab8e-8524730b7856  ext4     
/dev/sdb11      251ce128-bf47-46a3-96b9-501b01f43fa9  ext4     
/dev/sdb12      830ff7ce-e6eb-4e61-9b0e-5da92a05d594  ext4     
/dev/sdb13      2225d21f-4e89-4389-8781-c2d91cedf3fd  ext4      _Fedora-16-x86_6
/dev/sdb14      623795c9-2230-4aae-9bee-40d3966011bf  ext4     
/dev/sdb2        1c6e2e7a-da7e-4c5b-8e38-2764e884924f  ext4     
/dev/sdb5        6000aaca-10d1-4c4a-90dc-9042a9e22c76  swap     
/dev/sdb6        6fd24350-6fa8-4085-8455-b137a9e2d8d5  ext4     
/dev/sdb7        f665e56c-661b-490f-91f9-accb5251f928  ext4     
/dev/sdb8        61591afc-05a1-4e8b-be6a-a8acc4acc651  swap     
/dev/sdb9        f78991c4-6b36-4fa3-b411-77da2e452daf  ext4     
/dev/sdc1        EE241A97241A633F                      ntfs      WD500
/dev/sdd1        0848DE2748DE1374                      ntfs      STS
/dev/sdd5        01CCC0DF19623BD0                      ntfs      Linux

================================ Mount points: =================================

Device          Mount_Point              Type      Options

/dev/sdb6        /                        ext4      (rw,errors=remount-ro,commit=0)
/dev/sdb7        /home                    ext4      (rw,commit=0)
/dev/sdd5        /media/Linux            fuseblk    (rw,nosuid,nodev,allow_other,blksize=4096,default_permissions)


============================= sdb2/grub/grub.cfg: ==============================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}

function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}

function load_video {
  insmod vbe
  insmod vga
  insmod video_bochs
  insmod video_cirrus
}

insmod part_msdos
insmod ext2
set root='(hd2,msdos6)'
search --no-floppy --fs-uuid --set=root 5ca89eaf-04e4-48d6-b02b-0315fdac86cb
if loadfont /usr/share/grub/unicode.pf2 ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  insmod part_msdos
  insmod ext2
  set root='(hd2,msdos2)'
  search --no-floppy --fs-uuid --set=root 1c6e2e7a-da7e-4c5b-8e38-2764e884924f
  set locale_dir=($root)/grub/locale
  set lang=
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ]; then
  set timeout=-1
else
  set timeout=10
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 0,71,115; then
  clear
fi
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
if [ ${recordfail} != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
if [ "$linux_gfx_mode" != "text" ]; then load_video; fi
menuentry 'Ubuntu, with Linux 3.0.0-14-generic' --class ubuntu --class gnu-linux --class gnu --class os {
        recordfail
        set gfxpayload=$linux_gfx_mode
        insmod gzio
        insmod part_msdos
        insmod ext2
        set root='(hd2,msdos2)'
        search --no-floppy --fs-uuid --set=root 1c6e2e7a-da7e-4c5b-8e38-2764e884924f
        linux        /vmlinuz-3.0.0-14-generic root=UUID=5ca89eaf-04e4-48d6-b02b-0315fdac86cb ro  quiet splash vt.handoff=7
        initrd        /initrd.img-3.0.0-14-generic
}
menuentry 'Ubuntu, with Linux 3.0.0-14-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
        recordfail
        insmod gzio
        insmod part_msdos
        insmod ext2
        set root='(hd2,msdos2)'
        search --no-floppy --fs-uuid --set=root 1c6e2e7a-da7e-4c5b-8e38-2764e884924f
        echo        'Loading Linux 3.0.0-14-generic ...'
        linux        /vmlinuz-3.0.0-14-generic root=UUID=5ca89eaf-04e4-48d6-b02b-0315fdac86cb ro recovery nomodeset
        echo        'Loading initial ramdisk ...'
        initrd        /initrd.img-3.0.0-14-generic
}
submenu "Previous Linux versions" {
menuentry 'Ubuntu, with Linux 3.0.0-13-generic' --class ubuntu --class gnu-linux --class gnu --class os {
        recordfail
        set gfxpayload=$linux_gfx_mode
        insmod gzio
        insmod part_msdos
        insmod ext2
        set root='(hd2,msdos2)'
        search --no-floppy --fs-uuid --set=root 1c6e2e7a-da7e-4c5b-8e38-2764e884924f
        linux        /vmlinuz-3.0.0-13-generic root=UUID=5ca89eaf-04e4-48d6-b02b-0315fdac86cb ro  quiet splash vt.handoff=7
        initrd        /initrd.img-3.0.0-13-generic
}
menuentry 'Ubuntu, with Linux 3.0.0-13-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
        recordfail
        insmod gzio
        insmod part_msdos
        insmod ext2
        set root='(hd2,msdos2)'
        search --no-floppy --fs-uuid --set=root 1c6e2e7a-da7e-4c5b-8e38-2764e884924f
        echo        'Loading Linux 3.0.0-13-generic ...'
        linux        /vmlinuz-3.0.0-13-generic root=UUID=5ca89eaf-04e4-48d6-b02b-0315fdac86cb ro recovery nomodeset
        echo        'Loading initial ramdisk ...'
        initrd        /initrd.img-3.0.0-13-generic
}
menuentry 'Ubuntu, with Linux 3.0.0-12-generic' --class ubuntu --class gnu-linux --class gnu --class os {
        recordfail
        set gfxpayload=$linux_gfx_mode
        insmod gzio
        insmod part_msdos
        insmod ext2
        set root='(hd2,msdos2)'
        search --no-floppy --fs-uuid --set=root 1c6e2e7a-da7e-4c5b-8e38-2764e884924f
        linux        /vmlinuz-3.0.0-12-generic root=UUID=5ca89eaf-04e4-48d6-b02b-0315fdac86cb ro  quiet splash vt.handoff=7
        initrd        /initrd.img-3.0.0-12-generic
}
menuentry 'Ubuntu, with Linux 3.0.0-12-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
        recordfail
        insmod gzio
        insmod part_msdos
        insmod ext2
        set root='(hd2,msdos2)'
        search --no-floppy --fs-uuid --set=root 1c6e2e7a-da7e-4c5b-8e38-2764e884924f
        echo        'Loading Linux 3.0.0-12-generic ...'
        linux        /vmlinuz-3.0.0-12-generic root=UUID=5ca89eaf-04e4-48d6-b02b-0315fdac86cb ro recovery nomodeset
        echo        'Loading initial ramdisk ...'
        initrd        /initrd.img-3.0.0-12-generic
}
}
### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
        insmod part_msdos
        insmod ext2
        set root='(hd2,msdos2)'
        search --no-floppy --fs-uuid --set=root 1c6e2e7a-da7e-4c5b-8e38-2764e884924f
        linux16        /memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
        insmod part_msdos
        insmod ext2
        set root='(hd2,msdos2)'
        search --no-floppy --fs-uuid --set=root 1c6e2e7a-da7e-4c5b-8e38-2764e884924f
        linux16        /memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Ubuntu, with Linux 2.6.39.4 (on /dev/sdc9)" --class gnu-linux --class gnu --class os {
        insmod part_msdos
        insmod ext2
        set root='(hd2,msdos9)'
        search --no-floppy --fs-uuid --set=root f78991c4-6b36-4fa3-b411-77da2e452daf
        linux /boot/vmlinuz-2.6.39.4 root=UUID=f78991c4-6b36-4fa3-b411-77da2e452daf ro text splash vga=791
        initrd /boot/initrd.img-2.6.39.4
}
menuentry "Ubuntu, with Linux 2.6.39.4 (recovery mode) (on /dev/sdc9)" --class gnu-linux --class gnu --class os {
        insmod part_msdos
        insmod ext2
        set root='(hd2,msdos9)'
        search --no-floppy --fs-uuid --set=root f78991c4-6b36-4fa3-b411-77da2e452daf
        linux /boot/vmlinuz-2.6.39.4 root=UUID=f78991c4-6b36-4fa3-b411-77da2e452daf ro single
        initrd /boot/initrd.img-2.6.39.4
}
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=================== sdb2: Location of files loaded by Grub: ====================

          GiB - GB            File                                Fragment(s)

              =                grub/core.img                                  1
              =                grub/grub.cfg                                  1
              =                initrd.img-3.0.0-12-generic                    1
              =                initrd.img-3.0.0-13-generic                    1
              =                initrd.img-3.0.0-14-generic                    3
              =                vmlinuz-3.0.0-12-generic                      1
              =                vmlinuz-3.0.0-13-generic                      1
              =                vmlinuz-3.0.0-14-generic                      1

=========================== sdb6/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}

function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}

function load_video {
  insmod vbe
  insmod vga
  insmod video_bochs
  insmod video_cirrus
}

insmod part_msdos
insmod ext2
set root='(hd1,msdos6)'
search --no-floppy --fs-uuid --set=root 6fd24350-6fa8-4085-8455-b137a9e2d8d5
if loadfont /usr/share/grub/unicode.pf2 ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  insmod part_msdos
  insmod ext2
  set root='(hd1,msdos6)'
  search --no-floppy --fs-uuid --set=root 6fd24350-6fa8-4085-8455-b137a9e2d8d5
  set locale_dir=($root)/boot/grub/locale
  set lang=en_CA
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ]; then
  set timeout=-1
else
  set timeout=10
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 0,71,115; then
  clear
fi
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
if [ ${recordfail} != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
if [ "$linux_gfx_mode" != "text" ]; then load_video; fi
menuentry 'Ubuntu, with Linux 3.0.0-16-generic' --class ubuntu --class gnu-linux --class gnu --class os {
        recordfail
        set gfxpayload=$linux_gfx_mode
        insmod gzio
        insmod part_msdos
        insmod ext2
        set root='(hd1,msdos6)'
        search --no-floppy --fs-uuid --set=root 6fd24350-6fa8-4085-8455-b137a9e2d8d5
        linux        /boot/vmlinuz-3.0.0-16-generic root=UUID=6fd24350-6fa8-4085-8455-b137a9e2d8d5 ro  quiet splash vt.handoff=7
        initrd        /boot/initrd.img-3.0.0-16-generic
}
menuentry 'Ubuntu, with Linux 3.0.0-16-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
        recordfail
        insmod gzio
        insmod part_msdos
        insmod ext2
        set root='(hd1,msdos6)'
        search --no-floppy --fs-uuid --set=root 6fd24350-6fa8-4085-8455-b137a9e2d8d5
        echo        'Loading Linux 3.0.0-16-generic ...'
        linux        /boot/vmlinuz-3.0.0-16-generic root=UUID=6fd24350-6fa8-4085-8455-b137a9e2d8d5 ro recovery nomodeset
        echo        'Loading initial ramdisk ...'
        initrd        /boot/initrd.img-3.0.0-16-generic
}
submenu "Previous Linux versions" {
menuentry 'Ubuntu, with Linux 3.0.0-15-generic' --class ubuntu --class gnu-linux --class gnu --class os {
        recordfail
        set gfxpayload=$linux_gfx_mode
        insmod gzio
        insmod part_msdos
        insmod ext2
        set root='(hd1,msdos6)'
        search --no-floppy --fs-uuid --set=root 6fd24350-6fa8-4085-8455-b137a9e2d8d5
        linux        /boot/vmlinuz-3.0.0-15-generic root=UUID=6fd24350-6fa8-4085-8455-b137a9e2d8d5 ro  quiet splash vt.handoff=7
        initrd        /boot/initrd.img-3.0.0-15-generic
}
menuentry 'Ubuntu, with Linux 3.0.0-15-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
        recordfail
        insmod gzio
        insmod part_msdos
        insmod ext2
        set root='(hd1,msdos6)'
        search --no-floppy --fs-uuid --set=root 6fd24350-6fa8-4085-8455-b137a9e2d8d5
        echo        'Loading Linux 3.0.0-15-generic ...'
        linux        /boot/vmlinuz-3.0.0-15-generic root=UUID=6fd24350-6fa8-4085-8455-b137a9e2d8d5 ro recovery nomodeset
        echo        'Loading initial ramdisk ...'
        initrd        /boot/initrd.img-3.0.0-15-generic
}
menuentry 'Ubuntu, with Linux 3.0.0-14-generic' --class ubuntu --class gnu-linux --class gnu --class os {
        recordfail
        set gfxpayload=$linux_gfx_mode
        insmod gzio
        insmod part_msdos
        insmod ext2
        set root='(hd1,msdos6)'
        search --no-floppy --fs-uuid --set=root 6fd24350-6fa8-4085-8455-b137a9e2d8d5
        linux        /boot/vmlinuz-3.0.0-14-generic root=UUID=6fd24350-6fa8-4085-8455-b137a9e2d8d5 ro  quiet splash vt.handoff=7
        initrd        /boot/initrd.img-3.0.0-14-generic
}
menuentry 'Ubuntu, with Linux 3.0.0-14-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
        recordfail
        insmod gzio
        insmod part_msdos
        insmod ext2
        set root='(hd1,msdos6)'
        search --no-floppy --fs-uuid --set=root 6fd24350-6fa8-4085-8455-b137a9e2d8d5
        echo        'Loading Linux 3.0.0-14-generic ...'
        linux        /boot/vmlinuz-3.0.0-14-generic root=UUID=6fd24350-6fa8-4085-8455-b137a9e2d8d5 ro recovery nomodeset
        echo        'Loading initial ramdisk ...'
        initrd        /boot/initrd.img-3.0.0-14-generic
}
menuentry 'Ubuntu, with Linux 3.0.0-12-generic' --class ubuntu --class gnu-linux --class gnu --class os {
        recordfail
        set gfxpayload=$linux_gfx_mode
        insmod gzio
        insmod part_msdos
        insmod ext2
        set root='(hd1,msdos6)'
        search --no-floppy --fs-uuid --set=root 6fd24350-6fa8-4085-8455-b137a9e2d8d5
        linux        /boot/vmlinuz-3.0.0-12-generic root=UUID=6fd24350-6fa8-4085-8455-b137a9e2d8d5 ro  quiet splash vt.handoff=7
        initrd        /boot/initrd.img-3.0.0-12-generic
}
menuentry 'Ubuntu, with Linux 3.0.0-12-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
        recordfail
        insmod gzio
        insmod part_msdos
        insmod ext2
        set root='(hd1,msdos6)'
        search --no-floppy --fs-uuid --set=root 6fd24350-6fa8-4085-8455-b137a9e2d8d5
        echo        'Loading Linux 3.0.0-12-generic ...'
        linux        /boot/vmlinuz-3.0.0-12-generic root=UUID=6fd24350-6fa8-4085-8455-b137a9e2d8d5 ro recovery nomodeset
        echo        'Loading initial ramdisk ...'
        initrd        /boot/initrd.img-3.0.0-12-generic
}
}
### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
        insmod part_msdos
        insmod ext2
        set root='(hd1,msdos6)'
        search --no-floppy --fs-uuid --set=root 6fd24350-6fa8-4085-8455-b137a9e2d8d5
        linux16        /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
        insmod part_msdos
        insmod ext2
        set root='(hd1,msdos6)'
        search --no-floppy --fs-uuid --set=root 6fd24350-6fa8-4085-8455-b137a9e2d8d5
        linux16        /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Ubuntu, with Linux 3.0.0-16-generic (on /dev/sdb11)" --class gnu-linux --class gnu --class os {
        insmod part_msdos
        insmod ext2
        set root='(hd1,msdos11)'
        search --no-floppy --fs-uuid --set=root 251ce128-bf47-46a3-96b9-501b01f43fa9
        linux /boot/vmlinuz-3.0.0-16-generic root=UUID=251ce128-bf47-46a3-96b9-501b01f43fa9 ro quiet splash vt.handoff=7
        initrd /boot/initrd.img-3.0.0-16-generic
}
menuentry "Ubuntu, with Linux 3.0.0-16-generic (recovery mode) (on /dev/sdb11)" --class gnu-linux --class gnu --class os {
        insmod part_msdos
        insmod ext2
        set root='(hd1,msdos11)'
        search --no-floppy --fs-uuid --set=root 251ce128-bf47-46a3-96b9-501b01f43fa9
        linux /boot/vmlinuz-3.0.0-16-generic root=UUID=251ce128-bf47-46a3-96b9-501b01f43fa9 ro recovery nomodeset
        initrd /boot/initrd.img-3.0.0-16-generic
}
menuentry "Ubuntu, with Linux 3.0.0-12-generic (on /dev/sdb11)" --class gnu-linux --class gnu --class os {
        insmod part_msdos
        insmod ext2
        set root='(hd1,msdos11)'
        search --no-floppy --fs-uuid --set=root 251ce128-bf47-46a3-96b9-501b01f43fa9
        linux /boot/vmlinuz-3.0.0-12-generic root=UUID=251ce128-bf47-46a3-96b9-501b01f43fa9 ro quiet splash vt.handoff=7
        initrd /boot/initrd.img-3.0.0-12-generic
}
menuentry "Ubuntu, with Linux 3.0.0-12-generic (recovery mode) (on /dev/sdb11)" --class gnu-linux --class gnu --class os {
        insmod part_msdos
        insmod ext2
        set root='(hd1,msdos11)'
        search --no-floppy --fs-uuid --set=root 251ce128-bf47-46a3-96b9-501b01f43fa9
        linux /boot/vmlinuz-3.0.0-12-generic root=UUID=251ce128-bf47-46a3-96b9-501b01f43fa9 ro recovery nomodeset
        initrd /boot/initrd.img-3.0.0-12-generic
}
menuentry "Fedora release 16 (Verne) (on /dev/sdb13)" --class gnu-linux --class gnu --class os {
        insmod part_msdos
        insmod ext2
        set root='(hd1,msdos13)'
        search --no-floppy --fs-uuid --set=root 2225d21f-4e89-4389-8781-c2d91cedf3fd
        linux /boot/vmlinuz-3.1.0-7.fc16.x86_64 root=/dev/sdb13
        initrd /boot/initramfs-3.1.0-7.fc16.x86_64.img
}
menuentry "Ubuntu, with Linux 2.6.39.4 (on /dev/sdb9)" --class gnu-linux --class gnu --class os {
        insmod part_msdos
        insmod ext2
        set root='(hd1,msdos9)'
        search --no-floppy --fs-uuid --set=root f78991c4-6b36-4fa3-b411-77da2e452daf
        linux /boot/vmlinuz-2.6.39.4 root=UUID=f78991c4-6b36-4fa3-b411-77da2e452daf ro text splash vga=791
        initrd /boot/initrd.img-2.6.39.4
}
menuentry "Ubuntu, with Linux 2.6.39.4 (recovery mode) (on /dev/sdb9)" --class gnu-linux --class gnu --class os {
        insmod part_msdos
        insmod ext2
        set root='(hd1,msdos9)'
        search --no-floppy --fs-uuid --set=root f78991c4-6b36-4fa3-b411-77da2e452daf
        linux /boot/vmlinuz-2.6.39.4 root=UUID=f78991c4-6b36-4fa3-b411-77da2e452daf ro single
        initrd /boot/initrd.img-2.6.39.4
}
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###


Wiking 03-07-2012 12:01 PM

Code:

=============================== sdb6/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>  <type>  <options>      <dump>  <pass>
proc            /proc          proc    nodev,noexec,nosuid 0      0
# / was on /dev/sdc6 during installation
UUID=6fd24350-6fa8-4085-8455-b137a9e2d8d5 /              ext4    errors=remount-ro 0      1
# /home was on /dev/sdc7 during installation
UUID=f665e56c-661b-490f-91f9-accb5251f928 /home          ext4    defaults        0      2
# swap was on /dev/sdc5 during installation
UUID=6000aaca-10d1-4c4a-90dc-9042a9e22c76 none            swap    sw              0      0
# swap was on /dev/sdc8 during installation
UUID=61591afc-05a1-4e8b-be6a-a8acc4acc651 none            swap    sw              0      0
--------------------------------------------------------------------------------

=================== sdb6: Location of files loaded by Grub: ====================

          GiB - GB            File                                Fragment(s)

              =                boot/grub/core.img                            1
              =                boot/grub/grub.cfg                            1
              =                boot/initrd.img-3.0.0-12-generic              2
              =                boot/initrd.img-3.0.0-14-generic              2
              =                boot/initrd.img-3.0.0-15-generic              1
              =                boot/initrd.img-3.0.0-16-generic              3
              =                boot/vmlinuz-3.0.0-12-generic                  1
              =                boot/vmlinuz-3.0.0-14-generic                  1
              =                boot/vmlinuz-3.0.0-15-generic                  1
              =                boot/vmlinuz-3.0.0-16-generic                  2
              =                initrd.img                                    3
              =                initrd.img.old                                1
              =                vmlinuz                                        2
              =                vmlinuz.old                                    1

=========================== sdb9/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  load_env
fi
set default="0"
if [ ${prev_saved_entry} ]; then
  set saved_entry=${prev_saved_entry}
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z ${boot_once} ]; then
    saved_entry=${chosen}
    save_env saved_entry
  fi
}

function recordfail {
  set recordfail=1
  if [ -n ${have_grubenv} ]; then if [ -z ${boot_once} ]; then save_env recordfail; fi; fi
}
if [ ${recordfail} = 1 ]; then
  set timeout=-1
else
  set timeout=10
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
menuentry 'Ubuntu, with Linux 2.6.39.4' --class ubuntu --class gnu-linux --class gnu --class os {
        recordfail
        insmod ext2
        set root='(hd2,9)'
        search --no-floppy --fs-uuid --set f78991c4-6b36-4fa3-b411-77da2e452daf
        linux        /boot/vmlinuz-2.6.39.4 root=UUID=f78991c4-6b36-4fa3-b411-77da2e452daf ro  text splash vga=791
        initrd        /boot/initrd.img-2.6.39.4
}
menuentry 'Ubuntu, with Linux 2.6.39.4 (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
        recordfail
        insmod ext2
        set root='(hd2,9)'
        search --no-floppy --fs-uuid --set f78991c4-6b36-4fa3-b411-77da2e452daf
        echo        'Loading Linux 2.6.39.4 ...'
        linux        /boot/vmlinuz-2.6.39.4 root=UUID=f78991c4-6b36-4fa3-b411-77da2e452daf ro single
        echo        'Loading initial ramdisk ...'
        initrd        /boot/initrd.img-2.6.39.4
}
### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
        insmod ext2
        set root='(hd2,9)'
        search --no-floppy --fs-uuid --set f78991c4-6b36-4fa3-b411-77da2e452daf
        linux16        /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
        insmod ext2
        set root='(hd2,9)'
        search --no-floppy --fs-uuid --set f78991c4-6b36-4fa3-b411-77da2e452daf
        linux16        /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Ubuntu, with Linux 3.0.0-13-generic (on /dev/sdc6)" {
        insmod ext2
        set root='(hd2,2)'
        search --no-floppy --fs-uuid --set 1c6e2e7a-da7e-4c5b-8e38-2764e884924f
        linux /vmlinuz-3.0.0-13-generic root=UUID=5ca89eaf-04e4-48d6-b02b-0315fdac86cb ro quiet splash vt.handoff=7
        initrd /initrd.img-3.0.0-13-generic
}
menuentry "Ubuntu, with Linux 3.0.0-13-generic (recovery mode) (on /dev/sdc6)" {
        insmod ext2
        set root='(hd2,2)'
        search --no-floppy --fs-uuid --set 1c6e2e7a-da7e-4c5b-8e38-2764e884924f
        linux /vmlinuz-3.0.0-13-generic root=UUID=5ca89eaf-04e4-48d6-b02b-0315fdac86cb ro recovery nomodeset
        initrd /initrd.img-3.0.0-13-generic
}
menuentry "Ubuntu, with Linux 3.0.0-12-generic (on /dev/sdc6)" {
        insmod ext2
        set root='(hd2,2)'
        search --no-floppy --fs-uuid --set 1c6e2e7a-da7e-4c5b-8e38-2764e884924f
        linux /vmlinuz-3.0.0-12-generic root=UUID=5ca89eaf-04e4-48d6-b02b-0315fdac86cb ro quiet splash vt.handoff=7
        initrd /initrd.img-3.0.0-12-generic
}
menuentry "Ubuntu, with Linux 3.0.0-12-generic (recovery mode) (on /dev/sdc6)" {
        insmod ext2
        set root='(hd2,2)'
        search --no-floppy --fs-uuid --set 1c6e2e7a-da7e-4c5b-8e38-2764e884924f
        linux /vmlinuz-3.0.0-12-generic root=UUID=5ca89eaf-04e4-48d6-b02b-0315fdac86cb ro recovery nomodeset
        initrd /initrd.img-3.0.0-12-generic
}
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
--------------------------------------------------------------------------------

=============================== sdb9/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>  <type>  <options>      <dump>  <pass>
proc            /proc          proc    nodev,noexec,nosuid 0      0
# / was on /dev/sdc9 during installation
UUID=f78991c4-6b36-4fa3-b411-77da2e452daf /              ext4    errors=remount-ro 0      1
# /home was on /dev/sdc10 during installation
UUID=85d2b1dd-14fa-4880-ab8e-8524730b7856 /home          ext4    defaults        0      2
# swap was on /dev/sdc5 during installation
UUID=6000aaca-10d1-4c4a-90dc-9042a9e22c76 none            swap    sw              0      0
# swap was on /dev/sdc8 during installation
UUID=61591afc-05a1-4e8b-be6a-a8acc4acc651 none            swap    sw              0      0
--------------------------------------------------------------------------------

=================== sdb9: Location of files loaded by Grub: ====================

          GiB - GB            File                                Fragment(s)

              =                boot/grub/grub.cfg                            1
              =                boot/initrdf.img-2.6.39.4                      2
              =                boot/initrd.img-2.6.39.4                      3
              =                boot/initrds.img-2.6.39.4                      2
              =                boot/vmlinuz-2.6.39.4                          1
              =                initrd.img                                    3
              =                vmlinuz                                        1

========================== sdb11/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}

function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}

function load_video {
  insmod vbe
  insmod vga
  insmod video_bochs
  insmod video_cirrus
}

insmod part_msdos
insmod ext2
set root='(hd2,msdos11)'
search --no-floppy --fs-uuid --set=root 251ce128-bf47-46a3-96b9-501b01f43fa9
if loadfont /usr/share/grub/unicode.pf2 ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  insmod part_msdos
  insmod ext2
  set root='(hd2,msdos11)'
  search --no-floppy --fs-uuid --set=root 251ce128-bf47-46a3-96b9-501b01f43fa9
  set locale_dir=($root)/boot/grub/locale
  set lang=en_CA
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ]; then
  set timeout=-1
else
  set timeout=10
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30; then
  clear
fi
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
if [ ${recordfail} != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
if [ "$linux_gfx_mode" != "text" ]; then load_video; fi
menuentry 'Ubuntu, with Linux 3.0.0-16-generic' --class ubuntu --class gnu-linux --class gnu --class os {
        recordfail
        set gfxpayload=$linux_gfx_mode
        insmod gzio
        insmod part_msdos
        insmod ext2
        set root='(hd2,msdos11)'
        search --no-floppy --fs-uuid --set=root 251ce128-bf47-46a3-96b9-501b01f43fa9
        linux        /boot/vmlinuz-3.0.0-16-generic root=UUID=251ce128-bf47-46a3-96b9-501b01f43fa9 ro  quiet splash vt.handoff=7
        initrd        /boot/initrd.img-3.0.0-16-generic
}
menuentry 'Ubuntu, with Linux 3.0.0-16-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
        recordfail
        insmod gzio
        insmod part_msdos
        insmod ext2
        set root='(hd2,msdos11)'
        search --no-floppy --fs-uuid --set=root 251ce128-bf47-46a3-96b9-501b01f43fa9
        echo        'Loading Linux 3.0.0-16-generic ...'
        linux        /boot/vmlinuz-3.0.0-16-generic root=UUID=251ce128-bf47-46a3-96b9-501b01f43fa9 ro recovery nomodeset
        echo        'Loading initial ramdisk ...'
        initrd        /boot/initrd.img-3.0.0-16-generic
}
submenu "Previous Linux versions" {
menuentry 'Ubuntu, with Linux 3.0.0-12-generic' --class ubuntu --class gnu-linux --class gnu --class os {
        recordfail
        set gfxpayload=$linux_gfx_mode
        insmod gzio
        insmod part_msdos
        insmod ext2
        set root='(hd2,msdos11)'
        search --no-floppy --fs-uuid --set=root 251ce128-bf47-46a3-96b9-501b01f43fa9
        linux        /boot/vmlinuz-3.0.0-12-generic root=UUID=251ce128-bf47-46a3-96b9-501b01f43fa9 ro  quiet splash vt.handoff=7
        initrd        /boot/initrd.img-3.0.0-12-generic
}
menuentry 'Ubuntu, with Linux 3.0.0-12-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
        recordfail
        insmod gzio
        insmod part_msdos
        insmod ext2
        set root='(hd2,msdos11)'
        search --no-floppy --fs-uuid --set=root 251ce128-bf47-46a3-96b9-501b01f43fa9
        echo        'Loading Linux 3.0.0-12-generic ...'
        linux        /boot/vmlinuz-3.0.0-12-generic root=UUID=251ce128-bf47-46a3-96b9-501b01f43fa9 ro recovery nomodeset
        echo        'Loading initial ramdisk ...'
        initrd        /boot/initrd.img-3.0.0-12-generic
}
}
### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
        insmod part_msdos
        insmod ext2
        set root='(hd2,msdos11)'
        search --no-floppy --fs-uuid --set=root 251ce128-bf47-46a3-96b9-501b01f43fa9
        linux16        /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
        insmod part_msdos
        insmod ext2
        set root='(hd2,msdos11)'
        search --no-floppy --fs-uuid --set=root 251ce128-bf47-46a3-96b9-501b01f43fa9
        linux16        /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Ubuntu, with Linux 3.0.0-16-generic (on /dev/sdc6)" --class gnu-linux --class gnu --class os {
        insmod part_msdos
        insmod ext2
        set root='(hd2,msdos6)'
        search --no-floppy --fs-uuid --set=root 6fd24350-6fa8-4085-8455-b137a9e2d8d5
        linux /boot/vmlinuz-3.0.0-16-generic root=UUID=6fd24350-6fa8-4085-8455-b137a9e2d8d5 ro quiet splash vt.handoff=7
        initrd /boot/initrd.img-3.0.0-16-generic
}
menuentry "Ubuntu, with Linux 3.0.0-16-generic (recovery mode) (on /dev/sdc6)" --class gnu-linux --class gnu --class os {
        insmod part_msdos
        insmod ext2
        set root='(hd2,msdos6)'
        search --no-floppy --fs-uuid --set=root 6fd24350-6fa8-4085-8455-b137a9e2d8d5
        linux /boot/vmlinuz-3.0.0-16-generic root=UUID=6fd24350-6fa8-4085-8455-b137a9e2d8d5 ro recovery nomodeset
        initrd /boot/initrd.img-3.0.0-16-generic
}
menuentry "Ubuntu, with Linux 3.0.0-15-generic (on /dev/sdc6)" --class gnu-linux --class gnu --class os {
        insmod part_msdos
        insmod ext2
        set root='(hd2,msdos6)'
        search --no-floppy --fs-uuid --set=root 6fd24350-6fa8-4085-8455-b137a9e2d8d5
        linux /boot/vmlinuz-3.0.0-15-generic root=UUID=6fd24350-6fa8-4085-8455-b137a9e2d8d5 ro quiet splash vt.handoff=7
        initrd /boot/initrd.img-3.0.0-15-generic
}
menuentry "Ubuntu, with Linux 3.0.0-15-generic (recovery mode) (on /dev/sdc6)" --class gnu-linux --class gnu --class os {
        insmod part_msdos
        insmod ext2
        set root='(hd2,msdos6)'
        search --no-floppy --fs-uuid --set=root 6fd24350-6fa8-4085-8455-b137a9e2d8d5
        linux /boot/vmlinuz-3.0.0-15-generic root=UUID=6fd24350-6fa8-4085-8455-b137a9e2d8d5 ro recovery nomodeset
        initrd /boot/initrd.img-3.0.0-15-generic
}
menuentry "Ubuntu, with Linux 3.0.0-14-generic (on /dev/sdc6)" --class gnu-linux --class gnu --class os {
        insmod part_msdos
        insmod ext2
        set root='(hd2,msdos6)'
        search --no-floppy --fs-uuid --set=root 6fd24350-6fa8-4085-8455-b137a9e2d8d5
        linux /boot/vmlinuz-3.0.0-14-generic root=UUID=6fd24350-6fa8-4085-8455-b137a9e2d8d5 ro quiet splash vt.handoff=7
        initrd /boot/initrd.img-3.0.0-14-generic
}
menuentry "Ubuntu, with Linux 3.0.0-14-generic (recovery mode) (on /dev/sdc6)" --class gnu-linux --class gnu --class os {
        insmod part_msdos
        insmod ext2
        set root='(hd2,msdos6)'
        search --no-floppy --fs-uuid --set=root 6fd24350-6fa8-4085-8455-b137a9e2d8d5
        linux /boot/vmlinuz-3.0.0-14-generic root=UUID=6fd24350-6fa8-4085-8455-b137a9e2d8d5 ro recovery nomodeset
        initrd /boot/initrd.img-3.0.0-14-generic
}
menuentry "Ubuntu, with Linux 3.0.0-12-generic (on /dev/sdc6)" --class gnu-linux --class gnu --class os {
        insmod part_msdos
        insmod ext2
        set root='(hd2,msdos6)'
        search --no-floppy --fs-uuid --set=root 6fd24350-6fa8-4085-8455-b137a9e2d8d5
        linux /boot/vmlinuz-3.0.0-12-generic root=UUID=6fd24350-6fa8-4085-8455-b137a9e2d8d5 ro quiet splash vt.handoff=7
        initrd /boot/initrd.img-3.0.0-12-generic
}
menuentry "Ubuntu, with Linux 3.0.0-12-generic (recovery mode) (on /dev/sdc6)" --class gnu-linux --class gnu --class os {
        insmod part_msdos
        insmod ext2
        set root='(hd2,msdos6)'
        search --no-floppy --fs-uuid --set=root 6fd24350-6fa8-4085-8455-b137a9e2d8d5
        linux /boot/vmlinuz-3.0.0-12-generic root=UUID=6fd24350-6fa8-4085-8455-b137a9e2d8d5 ro recovery nomodeset
        initrd /boot/initrd.img-3.0.0-12-generic
}
menuentry "Ubuntu, with Linux 2.6.39.4 (on /dev/sdc9)" --class gnu-linux --class gnu --class os {
        insmod part_msdos
        insmod ext2
        set root='(hd2,msdos9)'
        search --no-floppy --fs-uuid --set=root f78991c4-6b36-4fa3-b411-77da2e452daf
        linux /boot/vmlinuz-2.6.39.4 root=UUID=f78991c4-6b36-4fa3-b411-77da2e452daf ro text splash vga=791
        initrd /boot/initrd.img-2.6.39.4
}
menuentry "Ubuntu, with Linux 2.6.39.4 (recovery mode) (on /dev/sdc9)" --class gnu-linux --class gnu --class os {
        insmod part_msdos
        insmod ext2
        set root='(hd2,msdos9)'
        search --no-floppy --fs-uuid --set=root f78991c4-6b36-4fa3-b411-77da2e452daf
        linux /boot/vmlinuz-2.6.39.4 root=UUID=f78991c4-6b36-4fa3-b411-77da2e452daf ro single
        initrd /boot/initrd.img-2.6.39.4
}
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sdb11/etc/fstab: ===============================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>  <type>  <options>      <dump>  <pass>
proc            /proc          proc    nodev,noexec,nosuid 0      0
# / was on /dev/sdb11 during installation
UUID=251ce128-bf47-46a3-96b9-501b01f43fa9 /              ext4    errors=remount-ro 0      1
# /home was on /dev/sdb12 during installation
UUID=830ff7ce-e6eb-4e61-9b0e-5da92a05d594 /home          ext4    defaults        0      2
# swap was on /dev/sdb5 during installation
UUID=6000aaca-10d1-4c4a-90dc-9042a9e22c76 none            swap    sw              0      0
# swap was on /dev/sdb8 during installation
UUID=61591afc-05a1-4e8b-be6a-a8acc4acc651 none            swap    sw              0      0
--------------------------------------------------------------------------------

=================== sdb11: Location of files loaded by Grub: ===================

          GiB - GB            File                                Fragment(s)

              =                boot/grub/core.img                            1
              =                boot/grub/grub.cfg                            1
              =                boot/initrd.img-3.0.0-12-generic              1
              =                boot/initrd.img-3.0.0-16-generic              1
              =                boot/vmlinuz-3.0.0-12-generic                  1
              =                boot/vmlinuz-3.0.0-16-generic                  1
              =                initrd.img                                    3
              =                initrd.img.old                                1
              =                vmlinuz                                        1
              =                vmlinuz.old                                    1

=============================== sdb13/etc/fstab: ===============================

--------------------------------------------------------------------------------

#
# /etc/fstab
# Created by anaconda on Mon Mar  5 07:11:19 2012
#
# Accessible filesystems, by reference, are maintained under '/dev/disk'
# See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for more info
#
UUID=2225d21f-4e89-4389-8781-c2d91cedf3fd /                      ext4    defaults        1 1
UUID=623795c9-2230-4aae-9bee-40d3966011bf /home                  ext4    defaults        1 2
UUID=6000aaca-10d1-4c4a-90dc-9042a9e22c76 swap                    swap    defaults        0 0
UUID=61591afc-05a1-4e8b-be6a-a8acc4acc651 swap                    swap    defaults        0 0
--------------------------------------------------------------------------------

=================== sdb13: Location of files loaded by Grub: ===================

          GiB - GB            File                                Fragment(s)

              =                boot/initramfs-3.1.0-7.fc16.x86_64.img        1
              =                boot/vmlinuz-3.1.0-7.fc16.x86_64              1

======================== Unknown MBRs/Boot Sectors/etc: ========================

Unknown BootLoader on sdb3

00000000  30 93 5e 7b 61 36 f3 32  45 0e 9e 18 bb b0 3a 2d  |0.^{a6.2E.....:-|
00000010  b9 f4 ae b4 61 f8 63 f1  40 40 23 47 b1 5f 76 95  |....a.c.@@#G._v.|
00000020  d3 de 5c 4f ac 3b 05 fd  eb 3b 2a ca 73 dd f8 67  |..\O.;...;*.s..g|
00000030  07 24 31 0d f0 96 e9 dd  12 07 2f c4 27 e2 3c 7a  |.$1......./.'.<z|
00000040  0d e3 30 e8 3e 73 62 63  1c 8c ad 90 27 9c d6 74  |..0.>sbc....'..t|
00000050  a6 e3 66 0b a3 be 22 16  46 1c b5 26 73 ed f3 98  |..f...".F..&s...|
00000060  31 8e 77 99 23 9b a2 41  96 a7 45 64 ae 25 31 1d  |1.w.#..A..Ed.%1.|
00000070  0a cf 98 33 ed 31 30 2e  50 96 14 1e 9b c0 d4 c6  |...3.10.P.......|
00000080  7e a4 9e 6d 88 85 b9 15  09 38 69 d9 3e ea 89 66  |~..m.....8i.>..f|
00000090  39 f5 6a 7a 1c d0 f5 53  f0 90 21 62 dc df 92 7c  |9.jz...S..!b...||
000000a0  e8 58 a7 9f cf dd 64 f3  2c b2 90 98 54 45 45 53  |.X....d.,...TEES|
000000b0  d5 16 8e 61 90 30 2f 8b  18 1c dc 50 55 ea e9 50  |...a.0/....PU..P|
000000c0  bd 8e 0e 83 9c f8 83 c4  6e cb 46 eb 15 87 c2 b9  |........n.F.....|
000000d0  27 1e fd 5f 92 68 25 95  4b 3a 0e 9e a1 52 6e 01  |'.._.h%.K:...Rn.|
000000e0  8e 7c ba f4 5b fc 58 10  c7 f7 c4 1f ee 39 b0 cd  |.|..[.X......9..|
000000f0  5a 3b 29 cf 86 eb 78 09  a5 0b 46 b3 46 b0 eb 1a  |Z;)...x...F.F...|
00000100  31 15 55 57 8e 55 9c 6d  60 49 f5 1b d2 e7 7a 0d  |1.UW.U.m`I....z.|
00000110  b5 ac 35 19 83 c6 1c e8  e3 71 8e 24 46 d6 53 4d  |..5......q.$F.SM|
00000120  65 61 38 ad 2c 10 a6 fc  5e 4c d4 23 cf 52 b6 95  |ea8.,...^L.#.R..|
00000130  53 71 ca ae 10 58 62 b1  9b 18 8c af a3 1c d7 db  |Sq...Xb.........|
00000140  e1 41 c7 97 82 70 a7 62  cf 3e 67 a8 30 11 48 a2  |.A...p.b.>g.0.H.|
00000150  81 0a 1a 4c a5 ed 1e 7e  9d de 76 3e f3 31 0e 4e  |...L...~..v>.1.N|
00000160  5f 92 c3 01 de 87 f9 e2  c9 3b f8 a4 39 0e b4 1f  |_........;..9...|
00000170  29 63 dd 67 a1 7c cd da  40 eb 97 57 e2 00 39 ec  |)c.g.|..@..W..9.|
00000180  66 ea 0d 0f 72 db ae 6f  e4 8a bf 8a 83 75 c5 e9  |f...r..o.....u..|
00000190  cc e6 f3 bf 71 ef 7c 1a  4d ad 78 f9 7f c9 22 61  |....q.|.M.x..."a|
000001a0  59 df 3e 19 d7 f2 e9 9a  00 0e 5b 7e 4c 06 7d 6c  |Y.>.......[~L.}l|
000001b0  e3 c0 c5 2f 98 e6 9e b7  64 c5 db e4 91 bc 00 fe  |.../....d.......|
000001c0  ff ff 82 fe ff ff 02 00  00 00 00 60 59 00 00 fe  |...........`Y...|
000001d0  ff ff 05 fe ff ff 02 60  59 00 00 08 54 02 00 00  |.......`Y...T...|
000001e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
000001f0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 55 aa  |..............U.|
00000200

Unknown BootLoader on isw_biccaegiee_Volume01



=============================== StdErr Messages: ===============================

ERROR: isw: wrong number of devices in RAID set "isw_biccaegiee_Volume0" [1/2] on /dev/sda
ERROR: isw: wrong number of devices in RAID set "isw_biccaegiee_Volume0" [1/2] on /dev/sda
ERROR: creating degraded mirror mapping for "isw_biccaegiee_Volume0"
ERROR: dos: partition address past end of RAID device
ERROR: isw: wrong number of devices in RAID set "isw_biccaegiee_Volume0" [1/2] on /dev/sda
ERROR: isw: wrong number of devices in RAID set "isw_biccaegiee_Volume0" [1/2] on /dev/sda
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
hexdump: /dev/mapper/isw_biccaegiee_Volume01: No such file or directory
hexdump: /dev/mapper/isw_biccaegiee_Volume01: No such file or directory
ERROR: isw: wrong number of devices in RAID set "isw_biccaegiee_Volume0" [1/2] on /dev/sda
ERROR: dos: partition address past end of RAID device

As for the errors when I boot, I get the following after selecting Fedora in Grub:

Code:

[6.635427 ]dracut mdadm: No arrays found in config file or automatically.

[43.965528 ] dracut Warning: No root device "block:dev/sdb13" found

No root device "block:dev/sdb13" found

No root device "block:dev/sdb13" found

dropping to debug shell

sh: can't access tty; job control turned off

dracut:/#

That's the end bit, there's more but I only wrote what looked important.

yancek 03-07-2012 02:51 PM

Your results.txt file shows that Grub2 is installed to the mbr of sdb and sdd. It also indicates that it looks on partition 8 for /boot/grub.
sdb8 is a swap partition. sdd only goes up to sdd5 so there is no partition 8? sdb13 (Fedora) only shows /etc/fstab under boot files.

I'd suggest searching for the error: dracut Warning: No root device found


All times are GMT -5. The time now is 07:09 PM.