can't mount DVD-RW plz help
Hi i am a newbie!
i have some problem with dvd
1)i bought a DVD-RW and written some data on it!
2)i used that data and formatted it with brasaro !
3)i can see cd/dvd player icon when i open "places->computer" but when i insert the dvd the icon vanished, brasaro also cant detect it .
4)when i eject it and close the cd drive then the icon of cd\dvd appears again
5) then i installed k3b.i can see a empty disk there in k3b but the icon is removed again in "places->computer" .
6)tried to write data using k3b on that dvd but it gives following error:
mkisofs crashed
and the debugging output is ..
Devices
-----------------------
HL-DT-ST DVDRAM GSA-4167B DL13 (/dev/sr0, CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL) [DVD-ROM, DVD-R Sequential, DVD-R Dual Layer Sequential, DVD-RAM, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Restricted Overwrite] [%7]
K3b::IsoImager
-----------------------
mkisofs print size result: 715730 (1465815040 bytes)
System
-----------------------
K3b Version: 1.91.0
KDE Version: 4.4.2 (KDE 4.4.2)
QT Version: 4.6.2
Kernel: 2.6.32-21-generic
Used versions
-----------------------
mkisofs: 1.1.10
cdrecord: 1.1.10
cdrecord
-----------------------
/usr/bin/wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits.
scsidev: '/dev/sr0'
devname: '/dev/sr0'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.10
SCSI buffer size: 64512
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
TOC Type: 1 = CD-ROM
Driveropts: 'burnfree'
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'HL-DT-ST'
Identification : 'DVDRAM GSA-4167B'
Revision : 'DL13'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0013 (DVD-RW restricted overwrite)
Profile: 0x0012 (DVD-RAM)
Profile: 0x0011 (DVD-R sequential recording)
Profile: 0x0015 (DVD-R/DL sequential recording)
Profile: 0x0014 (DVD-RW sequential recording) (current)
Profile: 0x0013 (DVD-RW restricted overwrite) (current)
Profile: 0x001A (DVD+RW)
Profile: 0x001B (DVD+R)
Profile: 0x002B (DVD+R/DL)
Profile: 0x0010 (DVD-ROM)
Profile: 0x0009 (CD-R)
Profile: 0x000A (CD-RW)
Profile: 0x0008 (CD-ROM)
Profile: 0x0002 (Removable disk)
Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
Driver flags : SWABAUDIO BURNFREE
Supported modes: PACKET SAO
Drive buf size : 1114112 = 1088 KB
Drive DMA Speed: 14336 kB/s 81x CD 10x DVD
FIFO size : 12582912 = 12288 KB
Speed set to 2770 KB/s
Track 01: data 1397 MB
Total size: 1605 MB (159:03.06) = 715730 sectors
Lout start: 1605 MB (159:05/05) = 715730 sectors
Current Secsize: 2048
HINT: use dvd+rw-mediainfo from dvd+rw-tools for information extraction.
Blocks total: 2297888 Blocks current: 2297888 Blocks remaining: 1582158
Starting to write CD/DVD at speed 2.0 in real SAO mode for single session.
Last chance to quit, starting real write in 2 seconds.
1 seconds.
0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... Errno: 5 (Input/output error), reserve track scsi sendcmd: no error
CDB: 53 00 00 00 00 00 0A EB D2 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 10 53 00 00 0D 24 00 00 C0
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0
Sense flags: Blk 0 (not valid) error refers to command part, bit ptr 0 (not valid) field ptr 0
cmd finished after 0.002s timeout 200s
/usr/bin/wodim: Cannot open new session.
input buffer ready.
Writing time: 0.053s
/usr/bin/wodim: fifo had 192 puts and 0 gets.
/usr/bin/wodim: fifo was 0 times empty and 0 times full, min fill was 100%.
cdrecord command:
-----------------------
/usr/bin/wodim -v gracetime=2 dev=/dev/sr0 speed=2 -sao driveropts=burnfree -data -tsize=715730s -
mkisofs
-----------------------
715730
I: -input-charset not specified, using utf-8 (detected in locale settings)
Using THE_T000.AVI;1 for /The.Train.1964.DVDRip.XviD-Anossamula.CD2.avi (The.Train.1964.DVDRip.XviD-Anossamula.CD1.avi)
0.07% done, estimate finish Mon Jun 7 22:36:46 2010
0.14% done, estimate finish Mon Jun 7 22:25:01 2010
0.21% done, estimate finish Mon Jun 7 22:20:59 2010
0.28% done, estimate finish Mon Jun 7 22:19:02 2010
0.35% done, estimate finish Mon Jun 7 22:17:51 2010
0.42% done, estimate finish Mon Jun 7 22:17:04 2010
0.49% done, estimate finish Mon Jun 7 22:16:29 2010
0.56% done, estimate finish Mon Jun 7 22:16:04 2010
0.63% done, estimate finish Mon Jun 7 22:15:44 2010
0.70% done, estimate finish Mon Jun 7 22:15:29 2010
0.77% done, estimate finish Mon Jun 7 22:15:15 2010
0.84% done, estimate finish Mon Jun 7 22:15:05 2010
mkisofs calculate size command:
-----------------------
/usr/bin/genisoimage -gui -graft-points -print-size -quiet -volid The.Train.1964.DVDRip.XviD-Anoss -volset -appid K3B THE CD KREATOR (C) 1998-2010 SEBASTIAN TRUEG AND MICHAL MALEK -publisher -preparer -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-rohit/k3bk24429.tmp -no-cache-inodes -iso-level 1 -path-list /tmp/kde-rohit/k3bo24429.tmp
mkisofs command:
-----------------------
/usr/bin/genisoimage -gui -graft-points -volid The.Train.1964.DVDRip.XviD-Anoss -volset -appid K3B THE CD KREATOR (C) 1998-2010 SEBASTIAN TRUEG AND MICHAL MALEK -publisher -preparer -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-rohit/k3bt24429.tmp -no-cache-inodes -iso-level 1 -path-list /tmp/kde-rohit/k3bp24429.tmp
so what should i do to use the DVD-RW?
plz help thanks in advance !!
Last edited by rhklinux; 06-07-2010 at 11:58 AM.
|