Auto mount not working with new HD's
I'll try to explain this as best as I can. I'm using Red Hat in a work environment as the system that runs my Netbackup. My predecessor was using 1Tb Western Digital external HD's and they worked great but now were upgrading to 2Tb drives and I have to format them and make sure then work correctly.
I have been able to format them in Red Hat and they have worked with Netbackup however the only way I can get them mounted is by having them plugged in and then restarting the whole system. The older drives are completely plug and play. Here are the steps that I have been following; #fdisk -l #fdisk /dev/sda1 Command (m for help):n (to make a new partition) (then I select "p" to make a primary patition) Partition number (1-4):1 "enter" (for default first cylinder) "enter" (for default last cylinder) then I set the file system type with; Command (m for help):t followed by "83" for the code to use the standard linux format then the "w" command to write the partition and exit fdisk Next I create the new filesystem on the drive with the command; #mkfs -t ext3 /dev/sda1 the format runs, then I finalize the format with; #fsck -f -y /dev/sda1 followed by a restart, which of course the drive comes up. But if I unmount the drive and remove it and then plug it back in nothing comes up. Trying to manually mount it doesn't come up with anything. I have attempted this with 3 different brand new Western Digital external HD's. what am I doing wrong here???? I've looked in the fstab and when I plug in the old hd's it comes up with the command to mount it. With the new one's its not there unless I do the complete system restart. |
Does anything show up on dmesg after you plug the disk back?
|
Quote:
|
Yes you can. :-)
Open a terminal and type dmesg. If you are unsure on how to read all the info, paste here please. |
ok, I've typed it in and here is what comes up
Linux version 2.6.9-67.EL (brewbuilder@ls20-bc1-14.build.redhat.com) (gcc versio n 3.4.6 20060404 (Red Hat 3.4.6-8)) #1 Wed Nov 7 13:41:13 EST 2007 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007f7f0000 (usable) BIOS-e820: 000000007f7f0000 - 000000007f800000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) 1143MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000f9bf0 Using x86 segment limits to approximate NX protection zapping low mappings. On node 0 totalpages: 522224 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 225280 pages, LIFO batch:16 HighMem zone: 292848 pages, LIFO batch:16 DMI 2.3 present. ACPI: RSDP (v000 COMPAQ ) @ 0x000eaa10 ACPI: RSDT (v001 COMPAQ CPQ0051 0x20021230 0x00000000) @ 0x000e6740 ACPI: FADT (v001 COMPAQ BROOKDG 0x00000001 0x00000000) @ 0x000e67f8 ACPI: SSDT (v001 COMPAQ PROJECT 0x00000001 MSFT 0x0100000e) @ 0x000e7439 ACPI: SSDT (v001 COMPAQ CORE_PNP 0x00000001 MSFT 0x0100000e) @ 0x000e7b76 ACPI: SSDT (v001 COMPAQ CORE_UTL 0x00000001 MSFT 0x0100000e) @ 0x000e80b0 ACPI: SSDT (v001 COMPAQ VILLTBL1 0x00000001 MSFT 0x0100000e) @ 0x000e824b ACPI: SSDT (v001 COMPAQ LGCYLITE 0x00000001 MSFT 0x0100000e) @ 0x000e8553 ACPI: SSDT (v001 COMPAQ UART2 0x00000001 MSFT 0x0100000e) @ 0x000e8a92 ACPI: SSDT (v001 COMPAQ FLOPPY 0x00000001 MSFT 0x0100000e) @ 0x000e8bf9 ACPI: MADT (v001 COMPAQ BROOKDG 0x00000001 0x00000000) @ 0x000e686c ACPI: SSDT (v001 COMPAQ APIC 0x00000001 MSFT 0x0100000e) @ 0x000ea6be ACPI: SSDT (v001 COMPAQ PNP_PRSS 0x00000001 MSFT 0x0100000e) @ 0x000e91b5 ACPI: SSDT (v001 COMPAQ UR2_PRSS 0x00000001 MSFT 0x0100000e) @ 0x000e95d9 ACPI: SSDT (v001 COMPAQ FPY_PRSS 0x00000001 MSFT 0x0100000e) @ 0x000e9746 ACPI: SSDT (v001 COMPAQ S3 0x00000001 MSFT 0x0100000e) @ 0x000e98f7 ACPI: SSDT (v001 COMPAQ CORE_S3 0x00000001 MSFT 0x0100000e) @ 0x000e9a2c ACPI: SSDT (v001 COMPAQ PIDETM 0x00000001 MSFT 0x0100000e) @ 0x000e9b67 ACPI: SSDT (v001 COMPAQ GTF0 0x00000001 MSFT 0x0100000e) @ 0x000e9e52 ACPI: SSDT (v001 COMPAQ SIDETM 0x00000001 MSFT 0x0100000e) @ 0x000e9cda ACPI: SSDT (v001 COMPAQ GTF2 0x00000001 MSFT 0x0100000e) @ 0x000ea157 ACPI: SSDT (v001 COMPAQ L08 0x00000001 MSFT 0x0100000e) @ 0x000ea461 ACPI: SSDT (v001 COMPAQ FINIS 0x00000001 MSFT 0x0100000e) @ 0x000ea859 ACPI: DSDT (v001 COMPAQ DSDT 0x00000001 MSFT 0x0100000e) @ 0x00000000 ACPI: PM-Timer IO Port: 0xf808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 15:2 APIC version 20 ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) Enabling APIC mode: Flat. Using 0 I/O APICs ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 80000000 (gap: 7f800000:7f400000) Built 1 zonelists Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet mapped APIC to ffffd000 (fee00000) Initializing CPU#0 CPU 0 irqstacks, hard=c0409000 soft=c0408000 PID hash table entries: 4096 (order: 12, 65536 bytes) Detected 2392.290 MHz processor. Using pmtmr for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 2065732k/2088896k available (2169k kernel code, 22156k reserved, 725k da ta, 172k init, 1171392k highmem) Calibrating delay using timer specific routine.. 4787.39 BogoMIPS (lpj=2393699) Security Scaffold v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode There is already a security framework initialized, register_security failed. selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: After all inits, caps: bfebf3ff 00000000 00000000 00000080 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU0: Intel P4/Xeon Extended MCE MSRs (12) available CPU0: Thermal monitoring enabled CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 07 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. ENABLING IO-APIC IRQs ..TIMER: vector=0x31 pin1=2 pin2=-1 checking if image is initramfs... it is Freeing initrd memory: 1279k freed NET: Registered protocol family 16 PCI: PCI BIOS revision 2.20 entry at 0xeca48, last bus=5 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20040816 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 14 15) ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT] Linux Plug and Play Support v0.97 (c) Adam Belay usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 169 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 169 ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 177 ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 185 ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 193 ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 201 ACPI: PCI Interrupt 0000:05:04.0[A] -> GSI 16 (level, low) -> IRQ 169 ACPI: PCI Interrupt 0000:05:08.0[A] -> GSI 20 (level, low) -> IRQ 209 ACPI: PCI Interrupt 0000:05:09.0[A] -> GSI 18 (level, low) -> IRQ 193 ACPI: PCI Interrupt 0000:05:09.1[B] -> GSI 21 (level, low) -> IRQ 217 ACPI: PCI Interrupt 0000:05:09.2[C] -> GSI 22 (level, low) -> IRQ 225 ACPI: PCI Interrupt 0000:05:09.3[A] -> GSI 18 (level, low) -> IRQ 193 ACPI: PCI Interrupt 0000:05:0a.0[A] -> GSI 21 (level, low) -> IRQ 217 ACPI: PCI Interrupt 0000:05:0a.1[B] -> GSI 22 (level, low) -> IRQ 225 ACPI: PCI Interrupt 0000:05:0a.2[C] -> GSI 16 (level, low) -> IRQ 169 apm: BIOS not found. audit: initializing netlink socket (disabled) audit(1285058086.672:1): initialized highmem bounce pool size: 64 pages Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Initializing Cryptographic API ksign: Installing public key data Loading keyring - Added public key CA81342F869DADAA - User ID: Red Hat, Inc. (Kernel Module GPG key) PCI: Via IRQ fixup for 0000:05:09.0, from 10 to 1 PCI: Via IRQ fixup for 0000:05:09.1, from 11 to 9 PCI: Via IRQ fixup for 0000:05:0a.0, from 11 to 9 PCI: Via IRQ fixup for 0000:05:0a.1, from 5 to 1 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI: Processor [CPU0] (supports C1, 8 throttling states) Real Time Clock Driver v1.12 Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected an Intel 845G Chipset. agpgart: Maximum main memory to use for agp memory: 1911M agpgart: Detected 8060K stolen memory. agpgart: AGP aperture is 128M @ 0xf0000000 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 68 ports, IRQ sharing enabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize divert: not allocating divert_blk for non-ethernet device lo Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH4: IDE controller at PCI slot 0000:00:1f.1 PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 193 ICH4: chipset revision 1 ICH4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x24a0-0x24a7, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x24a8-0x24af, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... hda: ST380011A, ATA DISK drive Using cfq io scheduler ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: LTN486S, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 Probing IDE interface ide2... Probing IDE interface ide3... Probing IDE interface ide4... Probing IDE interface ide5... hda: max request size: 1024KiB hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 hdc: ATAPI 48X CD-ROM drive, 120kB Cache, DMA Uniform CD-ROM driver Revision: 3.20 ide-floppy driver 0.99.newide usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.0:USB HID core driver mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard on isa0060/serio0 input: ImExPS/2 Generic Explorer Mouse on isa0060/serio1 md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 6, 262144 bytes) TCP established hash table entries: 262144 (order: 9, 2097152 bytes) TCP bind hash table entries: 131072 (order: 9, 3670016 bytes) TCP: Hash tables configured (established 262144 bind 131072) Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 ACPI wakeup devices: PCI0 HUB COM1 COM2 USB1 USB2 USB3 EUSB PBTN ACPI: (supports S0 S1 S3 S4 S5) Freeing unused kernel memory: 172k freed SCSI subsystem initialized libata version 2.00 loaded. device-mapper: 4.5.5-ioctl (2006-12-01) initialised: dm-devel@redhat.com cdrom: open failed. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. security: 3 users, 4 roles, 356 types, 26 bools security: 55 classes, 22665 rules SELinux: Completing initialization. SELinux: Setting up existing superblocks. SELinux: initialized (dev dm-0, type ext3), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), not configured for labeling SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts SELinux: initialized (dev devpts, type devpts), uses transition SIDs SELinux: initialized (dev eventpollfs, type eventpollfs), uses genfs_contexts SELinux: initialized (dev pipefs, type pipefs), uses task SIDs SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts SELinux: initialized (dev sockfs, type sockfs), uses task SIDs SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev bdev, type bdev), uses genfs_contexts SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts inserting floppy driver for 2.6.9-67.EL Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI e100: Copyright(c) 1999-2005 Intel Corporation ACPI: PCI Interrupt 0000:05:08.0[A] -> GSI 20 (level, low) -> IRQ 209 divert: allocating divert_blk for eth0 e100: eth0: e100_probe: addr 0xfc500000, irq 209, MAC addr 00:0B:CD:02:0A:07 r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded ACPI: PCI Interrupt 0000:05:04.0[A] -> GSI 16 (level, low) -> IRQ 169 divert: allocating divert_blk for eth1 eth1: Identified chip type is 'RTL8169s/8110s'. eth1: RTL8169 at 0xf8874800, 00:08:54:47:d2:80, IRQ 169 ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 201 PCI: Setting latency timer of device 0000:00:1f.5 to 64 intel8x0_measure_ac97_clock: measured 50047 usecs intel8x0: clocking to 48000 hw_random: RNG not detected ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 185 ehci_hcd 0000:00:1d.7: EHCI Host Controller PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: irq 185, pci mem f8986000 SELinux: initialized (dev usbdevfs, type usbdevfs), uses genfs_contexts ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 PCI: cache line size of 128 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10 hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected ACPI: PCI Interrupt 0000:05:09.2[C] -> GSI 22 (level, low) -> IRQ 225 ehci_hcd 0000:05:09.2: EHCI Host Controller ehci_hcd 0000:05:09.2: irq 225, pci mem f8988900 ehci_hcd 0000:05:09.2: new USB bus registered, assigned bus number 2 ehci_hcd 0000:05:09.2: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10 hub 2-0:1.0: USB hub found hub 2-0:1.0: 4 ports detected ACPI: PCI Interrupt 0000:05:0a.2[C] -> GSI 16 (level, low) -> IRQ 169 ehci_hcd 0000:05:0a.2: EHCI Host Controller ehci_hcd 0000:05:0a.2: irq 169, pci mem f898aa00 ehci_hcd 0000:05:0a.2: new USB bus registered, assigned bus number 3 ehci_hcd 0000:05:0a.2: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10 hub 3-0:1.0: USB hub found hub 3-0:1.0: 4 ports detected USB Universal Host Controller Interface driver v2.2 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 169 uhci_hcd 0000:00:1d.0: UHCI Host Controller PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: irq 169, io base 00002440 uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 177 uhci_hcd 0000:00:1d.1: UHCI Host Controller usb 1-1: new high speed USB device using address 2 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: irq 177, io base 00002460 uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5 hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:05:09.0[A] -> GSI 18 (level, low) -> IRQ 193 uhci_hcd 0000:05:09.0: UHCI Host Controller uhci_hcd 0000:05:09.0: irq 193, io base 000014c0 uhci_hcd 0000:05:09.0: new USB bus registered, assigned bus number 6 hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:05:09.1[B] -> GSI 21 (level, low) -> IRQ 217 uhci_hcd 0000:05:09.1: UHCI Host Controller Initializing USB Mass Storage driver... scsi0 : SCSI emulation for USB Mass Storage devices Vendor: WD Model: My Book 3.0 1123 Rev: 1006 Type: Direct-Access ANSI SCSI revision: 02 SCSI device sda: 3907024896 512-byte hdwr sectors (2000397 MB) sda: assuming drive cache: write through SCSI device sda: 3907024896 512-byte hdwr sectors (2000397 MB) sda: assuming drive cache: write through sda:<6>uhci_hcd 0000:05:09.1: irq 217, io base 000014e0 uhci_hcd 0000:05:09.1: new USB bus registered, assigned bus number 7 sda1 Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 USB Mass Storage device found at 2 usbcore: registered new driver usb-storage USB Mass Storage support registered. hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:05:0a.0[A] -> GSI 21 (level, low) -> IRQ 217 uhci_hcd 0000:05:0a.0: UHCI Host Controller uhci_hcd 0000:05:0a.0: irq 217, io base 00001800 uhci_hcd 0000:05:0a.0: new USB bus registered, assigned bus number 8 hub 8-0:1.0: USB hub found hub 8-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:05:0a.1[B] -> GSI 22 (level, low) -> IRQ 225 uhci_hcd 0000:05:0a.1: UHCI Host Controller uhci_hcd 0000:05:0a.1: irq 225, io base 00001820 uhci_hcd 0000:05:0a.1: new USB bus registered, assigned bus number 9 hub 9-0:1.0: USB hub found hub 9-0:1.0: 2 ports detected md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts NET: Registered protocol family 10 Disabled Privacy Extensions on device c038a3a0(lo) IPv6 over IPv4 tunneling driver divert: not allocating divert_blk for non-ethernet device sit0 ACPI: Power Button (FF) [PWRF] EXT3 FS on dm-0, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on hda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev hda1, type ext3), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev sda1, type ext3), uses xattr Adding 1015800k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1 SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts IA-32 Microcode Update Driver: v1.14 <tigran@veritas.com> microcode: CPU0 updated from revision 0x33 to 0x37, date = 06042003 IA-32 Microcode Update Driver v1.14 unregistered parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE] parport0: irq 7 detected ip_tables: (C) 2000-2002 Netfilter core team ip_tables: (C) 2000-2002 Netfilter core team ADDRCONF(NETDEV_UP): eth0: link is not ready e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready ip_tables: (C) 2000-2002 Netfilter core team r8169: eth1: link up SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts SELinux: initialized (dev 0:14, type nfs), uses genfs_contexts SELinux: initialized (dev 0:15, type nfs), uses genfs_contexts SELinux: initialized (dev 0:16, type nfs), uses genfs_contexts SELinux: initialized (dev 0:17, type nfs), uses genfs_contexts eth0: no IPv6 routers present eth1: no IPv6 routers present CIFS: Unknown mount option _netdev SELinux: initialized (dev cifs, type cifs), uses genfs_contexts CIFS: Unknown mount option _netdev SELinux: initialized (dev cifs, type cifs), uses genfs_contexts cdrom: open failed. i2c /dev entries driver parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE] parport0: irq 7 detected lp0: using parport0 (polling). lp0: console ready Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0 ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 169 [drm] Initialized i915 1.1.0 20040405 on minor 0: mtrr: base(0xf0020000) is not aligned on a size(0x800000) boundary atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0). atkbd.c: Use 'setkeycodes e001 <keycode>' to make it known. atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0). atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known. atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0). atkbd.c: Use 'setkeycodes e001 <keycode>' to make it known. atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0). atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known. atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0). atkbd.c: Use 'setkeycodes e001 <keycode>' to make it known. atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0). atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known. usb 1-1: USB disconnect, address 2 usb 1-1: new high speed USB device using address 3 scsi1 : SCSI emulation for USB Mass Storage devices Vendor: WD Model: My Book 3.0 1123 Rev: 1006 Type: Direct-Access ANSI SCSI revision: 02 sda: Spinning up disk....ready SCSI device sda: 3907024896 512-byte hdwr sectors (2000397 MB) sda: assuming drive cache: write through SCSI device sda: 3907024896 512-byte hdwr sectors (2000397 MB) sda: assuming drive cache: write through sda: sda1 Attached scsi disk sda at scsi1, channel 0, id 0, lun 0 Attached scsi generic sg0 at scsi1, channel 0, id 0, lun 0, type 0 USB Mass Storage device found at 3 kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev sda1, type ext3), uses xattr atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0). atkbd.c: Use 'setkeycodes e001 <keycode>' to make it known. |
Well, your dmesg says your disk is there.. which is a good thing I guess :-)
--------------- usb 1-1: USB disconnect, address 2 usb 1-1: new high speed USB device using address 3 scsi1 : SCSI emulation for USB Mass Storage devices Vendor: WD Model: My Book 3.0 1123 Rev: 1006 Type: Direct-Access ANSI SCSI revision: 02 sda: Spinning up disk....ready SCSI device sda: 3907024896 512-byte hdwr sectors (2000397 MB) sda: assuming drive cache: write through SCSI device sda: 3907024896 512-byte hdwr sectors (2000397 MB) sda: assuming drive cache: write through sda: sda1 Attached scsi disk sda at scsi1, channel 0, id 0, lun 0 Attached scsi generic sg0 at scsi1, channel 0, id 0, lun 0, type 0 USB Mass Storage device found at 3 kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev sda1, type ext3), uses xattr ----------------- Have your tried typing mount command to see where it is mounted? |
All times are GMT -5. The time now is 10:06 AM. |