Dear All,
Please help for this issue.
Everytime i turn on the laptop, it always appears the message
"ata1: softreset failed (Devie not ready)" I use linux fedora 17. Please help and solutions.
Code:
root@localhost goombah]# lspci |grep -i ata
00:12.0 SATA controller: ATI Technologies Inc SB600 Non-Raid-5 SATA
Code:
[root@localhost goombah]# uname -a
Linux localhost.localdomain 3.4.0-1.fc17.i686 #1 SMP Sun Jun 3 07:16:04 UTC 2012 i686 i686 i386 GNU/Linux
Code:
[root@localhost goombah]# dmesg |grep -i ata
[ 0.000000] BIOS-e820: 000000007fe60000 - 000000007fe76000 (ACPI data)
[ 0.000000] Memory: 2047496k/2095488k available (5330k kernel code, 47532k reserved, 2616k data, 620k init, 1190280k highmem)
[ 0.000000] .data : 0xc0934923 - 0xc0bc2980 (2616 kB)
[ 0.113918] ACPI: EC: GPE = 0x10, I/O: command/status = 0x66, data = 0x62
[ 0.117638] pci 0000:00:12.0: set SATA to AHCI mode
[ 0.130331] libata version 3.00 loaded.
[ 0.903288] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 0.905134] ata1: SATA max UDMA/133 abar m1024@0xf0309000 port 0xf0309100 irq 11
[ 0.905139] ata2: SATA max UDMA/133 abar m1024@0xf0309000 port 0xf0309180 irq 11
[ 0.905144] ata3: SATA max UDMA/133 abar m1024@0xf0309000 port 0xf0309200 irq 11
[ 0.905150] ata4: SATA max UDMA/133 abar m1024@0xf0309000 port 0xf0309280 irq 11
[ 1.210074] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.210113] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.210150] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.365041] ata1: softreset failed (device not ready)
[ 1.365239] ata1: applying PMP SRST workaround and retrying
[ 1.520060] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.568112] ata1.00: ATA-8: WDC WD1600BEVT-22ZCT0, 11.01A11, max UDMA/133
[ 1.568117] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.568123] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 1.569198] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 1.569202] ata1.00: configured for UDMA/133
[ 1.569430] scsi 0:0:0:0: Direct-Access ATA WDC WD1600BEVT-2 11.0 PQ: 0 ANSI: 5
[ 1.890674] Write protecting the kernel read-only data: 2112k
[ 4.340997] pata_atiixp 0000:00:14.1: enabling device (0014 -> 0015)
[ 4.341094] pata_atiixp 0000:00:14.1: setting latency timer to 64
[ 4.341580] scsi4 : pata_atiixp
[ 4.341722] scsi5 : pata_atiixp
[ 4.342173] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8420 irq 14
[ 4.342177] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8428 irq 15
[ 4.342256] ata5: port disabled--ignoring
[ 5.592191] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 6.079002] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
Thx.
