LinuxQuestions.org
Latest LQ Deal: Linux Power User Bundle
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Newbie
User Name
Password
Linux - Newbie This Linux forum is for members that are new to Linux.
Just starting out and have a question? If it is not in the man pages or the how-to's this is the place!

Notices


Reply
  Search this Thread
Old 06-01-2010, 10:51 PM   #1
vsgeping
LQ Newbie
 
Registered: Jun 2010
Posts: 8

Rep: Reputation: 0
After installing debian, can not access


My wireless card: TP-LINK 322G +
I ask, after the installation is complete debian5.04, how to configure wireless Internet access, thank you!


lspci entry:

00:00.0 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a1)
00:01.0 ISA bridge: nVidia Corporation MCP61 LPC Bridge (rev a2)
00:01.1 SMBus: nVidia Corporation MCP61 SMBus (rev a2)
00:01.2 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a2)
00:02.0 USB Controller: nVidia Corporation MCP61 USB Controller (rev a3)
00:02.1 USB Controller: nVidia Corporation MCP61 USB Controller (rev a3)
00:04.0 PCI bridge: nVidia Corporation MCP61 PCI bridge (rev a1)
00:05.0 Audio device: nVidia Corporation MCP61 High Definition Audio (rev a2)
00:07.0 Bridge: nVidia Corporation MCP61 Ethernet (rev a2)
00:08.0 IDE interface: nVidia Corporation MCP61 SATA Controller (rev a2)
00:08.1 IDE interface: nVidia Corporation MCP61 SATA Controller (rev a2)
00:09.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2)
00:0b.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2)
00:0c.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2)
00:0d.0 VGA compatible controller: nVidia Corporation C61 [GeForce 6150SE nForce 430] (rev a2)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control











I use a variety of methods,
For example: Download zd1211-firmware
Then I use the command: cp-R zd1211-firmware / * / lib/firmware/zd1211
But no results
 
Old 06-01-2010, 11:26 PM   #2
brucehinrichs
Member
 
Registered: Mar 2008
Location: US
Distribution: Debian Sid; Sabayon, UbuntuStudio, Slackware-multilib 13.1, Peppermint Ice, CentOS
Posts: 575

Rep: Reputation: 67
From your lspci output, you don't have wireless. Could it be USB? If so, please post the output of lsusb.

EDIT: Is it this one? Maybe take a look here.

Last edited by brucehinrichs; 06-01-2010 at 11:39 PM.
 
Old 06-02-2010, 12:03 AM   #3
vsgeping
LQ Newbie
 
Registered: Jun 2010
Posts: 8

Original Poster
Rep: Reputation: 0
Quote:
Originally Posted by brucehinrichs View Post
From your lspci output, you don't have wireless. Could it be USB? If so, please post the output of lsusb.

EDIT: Is it this one? Maybe take a look here.
I've seen.
dpkg-i zd1211-firmware_2.21.0.0-1_all.deb
dpkg-i wireless-tools_29-1.1_amd64.deb
Print the installation was successful, but without any result,
The results of my lsusb command is:
Bus 002 Device 003: ID 0e8d: 0002 MediaTek Inc.
Bus 002 Device 002: ID 046d: c018 Logitech, Inc. Optical Wheel Mouse
Bus 002 Device 001: ID 1d6b: 0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 0ace: 1215 ZyDAS WLA-54L 802.11bg
Bus 001 Device 001: ID 1d6b: 0002 Linux Foundation 2.0 root hub


I use the ifconfig command, the result is:
lo Link encap: Local Loopback
inet addr: 127.0.0.1 Mask: 255.0.0.0
inet6 addr::: 1 / 128 Scope: Host
UP LOOPBACK RUNNING MTU: 16436 Metric: 1
RX packets: 101 errors: 0 dropped: 0 overruns: 0 frame: 0
TX packets: 101 errors: 0 dropped: 0 overruns: 0 carrier: 0
collisions: 0 txqueuelen: 0
RX bytes: 22221 (21.7 KiB) TX bytes: 22221 (21.7 KiB)


I use the iwconfig command, the result is:
lo no wireless extensions.
eth0 no wireless extensions.
wmaster0 no wireless extensions.
wlan0 IEEE 802.11 ESSID: ""
Mode: Managed Frequency: 2.412 GHz Access Point: Not-Associated
Tx-Power = 0 dBm
Retry min limit: 7 RTS thr: off Fragment thr = 2352 B
Encryption key: off
Link Quality: 0 Signal level: 0 Noise level: 0
Rx invalid nwid: 0 Rx invalid crypt: 0 Rx invalid frag: 0
Tx excessive retries: 0 Invalid misc: 0 Missed beacon: 0

I began to configure: iwconfig wlan0 essid "links"
iwconfig wlan0 key "*******"
Once again, I use the command ifconfig wlan0 up
System gave me a hint: Connection timed out

Each boot, the computer will prompt:
receive_packet failed on wlan0: network is down

failed to bring up wlan0
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 8.
send_packet: network is down
 
Old 06-02-2010, 02:08 AM   #4
vsgeping
LQ Newbie
 
Registered: Jun 2010
Posts: 8

Original Poster
Rep: Reputation: 0
help me.
 
Old 06-02-2010, 02:40 AM   #5
brucehinrichs
Member
 
Registered: Mar 2008
Location: US
Distribution: Debian Sid; Sabayon, UbuntuStudio, Slackware-multilib 13.1, Peppermint Ice, CentOS
Posts: 575

Rep: Reputation: 67
Help us to help you.

Quote:
Originally Posted by brucehinrichs View Post
From your lspci output, you don't have wireless. Could it be USB? If so, please post the output of lsusb.

EDIT: Is it this one? Maybe take a look here.
You could also consult the Debian Wiki - WiFi


EDIT: Just saw the lsusb. Have you tried modprobe zd1211?

Last edited by brucehinrichs; 06-02-2010 at 02:45 AM.
 
Old 06-02-2010, 02:52 AM   #6
vsgeping
LQ Newbie
 
Registered: Jun 2010
Posts: 8

Original Poster
Rep: Reputation: 0
Quote:
Originally Posted by brucehinrichs View Post
Help us to help you.



You could also consult the Debian Wiki - WiFi


EDIT: Just saw the lsusb. Have you tried modprobe zd1211?

I tried modprobe zd1211rw.
 
Old 06-02-2010, 07:30 AM   #7
vsgeping
LQ Newbie
 
Registered: Jun 2010
Posts: 8

Original Poster
Rep: Reputation: 0
Help me
 
Old 06-02-2010, 07:53 AM   #8
craigevil
Senior Member
 
Registered: Apr 2005
Location: OZ
Distribution: Debian Sid
Posts: 4,734
Blog Entries: 12

Rep: Reputation: 462Reputation: 462Reputation: 462Reputation: 462Reputation: 462
$lsmod | grep zd1211

Does the module show up?

Install a newer kernel from the backports repo. http://www.backports.org/dokuwiki/do...d=instructions

ZyDAS zd1211 54 MBit/s devices

The modules using this firmware are
zd1211*
To install the firmware
apt-get install zd1211-firmware
You can confirm you have installed the firmware by checking for the following files

* /lib/firmware/zd1211/zd1211


Looking at http://wiki.debian.org/zd1211rw it appears that your device should work in Lenny with the current kernel. Go through the steps again carefully.
 
Old 06-02-2010, 07:59 AM   #9
vsgeping
LQ Newbie
 
Registered: Jun 2010
Posts: 8

Original Poster
Rep: Reputation: 0
Quote:
Originally Posted by craigevil View Post
$lsmod | grep zd1211

Does the module show up?

Install a newer kernel from the backports repo. http://www.backports.org/dokuwiki/do...d=instructions

ZyDAS zd1211 54 MBit/s devices

The modules using this firmware are
zd1211*
To install the firmware
apt-get install zd1211-firmware
You can confirm you have installed the firmware by checking for the following files

* /lib/firmware/zd1211/zd1211


Looking at http://wiki.debian.org/zd1211rw it appears that your device should work in Lenny with the current kernel. Go through the steps again carefully.
You tell me the answer (http://wiki.debian.org/zd1211rw), I have seen it, and in accordance with its step by step tips to do. But to now no results. Still can not connect to the network.

I guess probably my kernel version is too low, so I try to compile a more advanced version of the kernel, but still no effect so far.
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



Similar Threads
Thread Thread Starter Forum Replies Last Post
user access on Debian bookie Linux - Newbie 4 06-21-2007 09:24 AM
Debian Woody: Can't access internet through router, but can access network computers marales314 Linux - Networking 3 06-09-2006 01:33 PM
I use Debian, I have an HP 3550 no access... tarcisio Linux - Hardware 0 11-01-2003 09:07 PM

LinuxQuestions.org > Forums > Linux Forums > Linux - Newbie

All times are GMT -5. The time now is 12:38 AM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration