LinuxQuestions.org
Help answer threads with 0 replies.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Newbie
User Name
Password
Linux - Newbie This Linux forum is for members that are new to Linux.
Just starting out and have a question? If it is not in the man pages or the how-to's this is the place!

Notices


Reply
  Search this Thread
Old 06-30-2006, 01:52 PM   #1
Rai42
LQ Newbie
 
Registered: Jun 2006
Posts: 22

Rep: Reputation: 15
'Seeing' my windows partition


Hi guys, I've been trawling thru the archives looking for the answer to my question, but still can't quite get it to work so thought I'd ask for some personal help.

I have a duel boot system running Windows and Red Hat. I'd like to be able to see the files from the windows partition while I'm using Red Hat. I've tried following the steps people have suggested for mounting the partition, but I'm not sure whether I'm typing the right thing (well I'm obviously not as it's not working!).

This is what I get from typing fdisk -l

Disk /dev/hde: 203.9 GB, 203928109056 bytes
255 heads, 63 sectors/track, 24792 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

Device Boot Start End Blocks Id System
/dev/hde1 * 1 12748 102398278+ 7 HPFS/NTFS
/dev/hde2 12749 12992 1959930 6 FAT16
/dev/hde3 12993 13005 104422+ 83 Linux
/dev/hde4 13006 24792 94679077+ f Win95 Ext'd (LBA)
/dev/hde5 13006 13770 6144831 83 Linux
/dev/hde6 13771 13901 1052226 82 Linux swap
/dev/hde7 13902 24792 87481926 83 Linux

Slightly confused that it's all come up as hde rather than hda ... is that a problem?

Anyhow, have tried a few different lines in my /etc/fstab file, but just doesn't seem to do anything ... Help!

Thank you
 
Old 06-30-2006, 01:56 PM   #2
Nylex
LQ Addict
 
Registered: Jul 2003
Location: London, UK
Distribution: Slackware
Posts: 7,464

Rep: Reputation: Disabled
After you edited fstab, did you run "mount -a"? What do the lines you've added to fstab look like? It's not a problem that your hard drive is hde rather than hda, presumably you have other IDE devices in that machine?
 
Old 06-30-2006, 02:02 PM   #3
Rai42
LQ Newbie
 
Registered: Jun 2006
Posts: 22

Original Poster
Rep: Reputation: 15
AT the moment my /etc/fstab file looks like this (I added the last line)

LABEL=/ / ext3 defaults 1 1
LAB
EL=/boot /boot ext3 defaults 1 2
none /dev/pts devpts gid=5,mode=620 0 0
LABEL=/home /home ext3 defaults 1 2
none /proc proc defaults 0 0
none /dev/shm tmpfs defaults 0 0
/dev/hde6 swap swap defaults 0 0
/dev/sda1 /mnt/flash auto noauto,owner,kudzu 0 0
/dev/cdrom /mnt/cdrom udf,iso9660 noauto,owner,kudzu,ro 0 0
/dev/hde2 /home/rachel/H vfat user,rw,exec,umask=000 0 0

I've just tried to run mount -a in the /home/rachel/H directory (would only let me do it as root) and got the following error

mount: wrong fs type, bad option, bad superblock on /dev/hde2,
or too many mounted file systems

I've also tried it with hde4 instead of hde2 and msdos instead of vfat (can you tell I really don't know what I'm doing!?!), none of which seem to work.

Cheers for your help!
 
Old 06-30-2006, 02:08 PM   #4
Nylex
LQ Addict
 
Registered: Jul 2003
Location: London, UK
Distribution: Slackware
Posts: 7,464

Rep: Reputation: Disabled
How about just mounting the partition without having it in your fstab first? Try commenting out that last line (i.e. put a # at the beginning) and then run (as root) "mount -t vfat /dev/hde2 /home/rachel/H". Does that work at all?
 
Old 06-30-2006, 02:22 PM   #5
Rai42
LQ Newbie
 
Registered: Jun 2006
Posts: 22

Original Poster
Rep: Reputation: 15
hmmmm Can't even get onto linux at the moment to try it. I rebooted with that line still in my fstab and it complained heavily when booting up :s Said something about taking me down to shell level and I had the option of hitting cntrl D, which just rebooted or entering root password, which then gave the line
(repair filesystem) 1 #
Absolutely no idea what to type after that ....
 
Old 06-30-2006, 02:35 PM   #6
Rai42
LQ Newbie
 
Registered: Jun 2006
Posts: 22

Original Poster
Rep: Reputation: 15
Okey dokey - Here's the details of my new problem ... how do I get out of this one? The following is transcribed from where it all started to go wrong during the boot!

Checking filesystems
WARNING: bad format on line 2 of /etc/fstab
fsck ext3: EL = /boot:
The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it really contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternative superblock:
e2fsck -b8193 <device>

/home: clean, 269068/10944512 files, 4027182/21870481 blocks
No such file or directory while trying to open EL = /boot
[FAILED]

*** An error occured during the file system check
*** Dropping you to a shell; the system will reboot
*** when you leave they shell

Give root password for maintenance (or type Control-D to continue)

Last edited by Rai42; 06-30-2006 at 02:39 PM.
 
Old 06-30-2006, 04:52 PM   #7
Rai42
LQ Newbie
 
Registered: Jun 2006
Posts: 22

Original Poster
Rep: Reputation: 15
Right ... sorted out the boot problem, back to the original one ...

Tried mounting the partition manually as suggested but got the same error

[root@zia root]# mount -t vfat /dev/hde2 /home/rachel/H
mount: wrong fs type, bad option, bad superblock on /dev/hde2,
or too many mounted file systems

Any more suggestions?
Much appriciated
 
Old 06-30-2006, 08:04 PM   #8
brainiac
Member
 
Registered: Jan 2005
Location: middle of a cornfield, IL
Distribution: Kanotix HD Install, Debian Testing, XP Pro,Vista RC1
Posts: 145

Rep: Reputation: 15
Does /home/rachel/H exist in your home directory? It won't create it for you. It should work.
 
Old 06-30-2006, 10:53 PM   #9
Nylex
LQ Addict
 
Registered: Jul 2003
Location: London, UK
Distribution: Slackware
Posts: 7,464

Rep: Reputation: Disabled
No, if it was a mount point problem, mount would tell you that. Ah, vfat may indeed be the wrong filesystem type. Try running "modprobe fat" and then running mount again, but using "fat" as the type, rather than "vfat".
 
Old 06-30-2006, 11:09 PM   #10
PipeDreams
Member
 
Registered: Dec 2005
Distribution: Mandriva 2006 x64
Posts: 161

Rep: Reputation: 30
I'm slightly confused now but I think you have a dual boot with win and red hat.Win still boots right?

(I have no idea why so many linux partitions if you just have 1 linux.and your swap partition is huge.you got 5 GB of ram?)

If so(win still boot) does GRUB do the multi boot thing for you or lilo?

If grub is there I think you can run a grub shell and have grub set itself up again in the boot file in the root partition which should clear up the wrong fs thing and fix the fstab of your linux.

I'm not familiar with the red hat flavor but your install disk #1 should have a rescue feature.if so re-install bootlaoder.If grub asks anything during re-install about windows or "another partition with another fs type"answer yes and it should correctly add the win partition to your linux fstab.

Hope this helps.
 
Old 06-30-2006, 11:41 PM   #11
jschiwal
LQ Guru
 
Registered: Aug 2001
Location: Fargo, ND
Distribution: SuSE AMD64
Posts: 15,733

Rep: Reputation: 682Reputation: 682Reputation: 682Reputation: 682Reputation: 682Reputation: 682
This is what my /etc/fstab entry for a windows ntfs partition looks like:
/dev/hda1 /windows/C ntfs ro,users,gid=users,umask=0002,nls=utf8 0 0
Doing it manually would be like this:
sudo mount -t ntfs /dev/hda1 /windows/C ro,users,gid=users,umask=0002,nls=utf8

If you still get the same message as you posted before, try removing one option at a time. A bad option could give you the same message. You may have your windows partitions mounted somewhere else. That is fine.
If you can boot up both systems, don't bother trying to change grub. Get the windows partition mounted manually, they way you want it. If it works, then you can use an entry in /etc/fstab based on the same options.

Be sure to read the "man mount" manpages.
 
Old 06-30-2006, 11:43 PM   #12
Nylex
LQ Addict
 
Registered: Jul 2003
Location: London, UK
Distribution: Slackware
Posts: 7,464

Rep: Reputation: Disabled
Again, I think the filesystem type specified is wrong. I found another thread saying to use "fat" for FAT16, rather than "vfat".
 
Old 07-01-2006, 02:32 AM   #13
jschiwal
LQ Guru
 
Registered: Aug 2001
Location: Fargo, ND
Distribution: SuSE AMD64
Posts: 15,733

Rep: Reputation: 682Reputation: 682Reputation: 682Reputation: 682Reputation: 682Reputation: 682
Sometimes you can get lucky and using type "auto" will figure it out for you. I don't know which types that works with however.

If it helps, here are the vfat mount options from the vfat.txt file in the kernel source:
Code:
USING VFAT
----------------------------------------------------------------------
To use the vfat filesystem, use the filesystem type 'vfat'.  i.e.
  mount -t vfat /dev/fd0 /mnt

No special partition formatter is required.  mkdosfs will work fine
if you want to format from within Linux.

VFAT MOUNT OPTIONS
----------------------------------------------------------------------
umask=###     -- The permission mask (for files and directories, see umask(1)).
                 The default is the umask of current process.

dmask=###     -- The permission mask for the directory.
                 The default is the umask of current process.

fmask=###     -- The permission mask for files.
                 The default is the umask of current process.

codepage=###  -- Sets the codepage number for converting to shortname
		 characters on FAT filesystem.
		 By default, FAT_DEFAULT_CODEPAGE setting is used.

iocharset=name -- Character set to use for converting between the
		 encoding is used for user visible filename and 16 bit
		 Unicode characters. Long filenames are stored on disk
		 in Unicode format, but Unix for the most part doesn't
		 know how to deal with Unicode.
		 By default, FAT_DEFAULT_IOCHARSET setting is used.

		 There is also an option of doing UTF8 translations
		 with the utf8 option.

		 NOTE: "iocharset=utf8" is not recommended. If unsure,
		 you should consider the following option instead.

utf8=<bool>   -- UTF8 is the filesystem safe version of Unicode that
		 is used by the console.  It can be be enabled for the
		 filesystem with this option. If 'uni_xlate' gets set,
		 UTF8 gets disabled.

uni_xlate=<bool> -- Translate unhandled Unicode characters to special
		 escaped sequences.  This would let you backup and
		 restore filenames that are created with any Unicode
		 characters.  Until Linux supports Unicode for real,
		 this gives you an alternative.  Without this option,
		 a '?' is used when no translation is possible.  The
		 escape character is ':' because it is otherwise
		 illegal on the vfat filesystem.  The escape sequence
		 that gets used is ':' and the four digits of hexadecimal
		 unicode.

nonumtail=<bool> -- When creating 8.3 aliases, normally the alias will
                 end in '~1' or tilde followed by some number.  If this
                 option is set, then if the filename is 
                 "longfilename.txt" and "longfile.txt" does not
                 currently exist in the directory, 'longfile.txt' will
                 be the short alias instead of 'longfi~1.txt'. 
                  
quiet         -- Stops printing certain warning messages.

check=s|r|n   -- Case sensitivity checking setting.
                 s: strict, case sensitive
                 r: relaxed, case insensitive
                 n: normal, default setting, currently case insensitive

shortname=lower|win95|winnt|mixed
	      -- Shortname display/create setting.
		 lower: convert to lowercase for display,
			emulate the Windows 95 rule for create.
		 win95: emulate the Windows 95 rule for display/create.
		 winnt: emulate the Windows NT rule for display/create.
		 mixed: emulate the Windows NT rule for display,
			emulate the Windows 95 rule for create.
		 Default setting is `lower'.

<bool>: 0,1,yes,no,true,false
I tried a little experiment. I created an empty file: dd if=/dev/zero of=fat16.img bs=256 count=4000
The name turned out to be misleading, as I found out later.
I also modprobed the fat file system. I don't know whether it already was present. Yes I forgot to check first.
modprobe fat

I created a fat filesystem on this file with "mkfs.msdos fat16.img".
Next I created a directory to mount it on, and mounted the file using a loop back device.
mkdir test
mount -t auto fat16.img test/ -o loop,rw,uid=jschiwal,gid=users,fmask=0111,dmask=0000

Then I used the "mount" command to see how it was mounted.
/home/jschiwal/podcasts/fat16.img on /home/jschiwal/podcasts/test type vfat (rw,loop=/dev/loop1,uid=1000,gid=100,fmask=0111,dmask=0000)

Using "fdisk -l /dev/loop1" didn't provide much useful information. So I tried "file fat16.img":
fat16.img: x86 boot sector, mkdosfs boot message display, code offset 0x3c, OEM-ID " mkdosfs", sectors/cluster 4, root entries 512, sectors 2000 (volumes <=32 MB) , Media descriptor 0xf8, sectors/FAT 2, heads 64, serial number 0x44a61f31, label: " ", FAT (12 bit)


Next I created a larger file and used mkfs.msdos on it to create a filesytem.
hpamd64:/home/jschiwal/podcasts # ls -lh fat.img
-rw-r--r-- 1 root root 74M 2006-07-01 02:21 fat.img
hpamd64:/home/jschiwal/podcasts # file fat.img
fat.img: x86 boot sector, mkdosfs boot message display, code offset 0x3c, OEM-ID " mkdosfs", sectors/cluster 4, root entries 512, Media descriptor 0xf8, sectors/FAT 147, heads 64, sectors 150000 (volumes > 32 MB) , serial number 0x44a62296, label: " ", FAT (16 bit)

hpamd64:/home/jschiwal/podcasts # mount -t auto fat.img test/ -o fmask=0111,dmask=0000,uid=jschiwal,gid=users,loop

Let's see how it was mounted:
/home/jschiwal/podcasts/fat.img on /home/jschiwal/podcasts/test type vfat (rw,loop=/dev/loop1,fmask=0111,dmask=0000,uid=1000,gid=100)

For completeness: file /dev/loop1
Disk /dev/loop1: 76 MB, 76800000 bytes
255 heads, 63 sectors/track, 9 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes


This time the fat16 filesystem was used, because it is over 32MB in size. I used auto, which selected "vfat" again. It looks like vfat should be the option to use.
 
Old 07-01-2006, 05:19 AM   #14
Rai42
LQ Newbie
 
Registered: Jun 2006
Posts: 22

Original Poster
Rep: Reputation: 15
Hi again,

Thanks for all the replys! I'm afraid I don't really understand everything as I'm trying to learn it as I go along.

Linux was installed on my computer by my system manager at work, so I don't have any disks or anything.

It is GRUB that does the multi boot thing, but I've no idea how to run a GRUB shell.

I've tried using fat and msdos instead of vfat, neither of which work
[root@zia root]# mount -t msdos /dev/hde2 /home/rachel/H
mount: wrong fs type, bad option, bad superblock on /dev/hde2,
or too many mounted file systems
[root@zia root]# mount -t fat /dev/hde2 /home/rachel/H
mount: fs type fat not supported by kernel

What's modprobe fat meant to do and where do I run it from? Tried just typing it in a terminal window (as root) but it didn't do anything at all.

Cheers
 
Old 07-01-2006, 05:21 AM   #15
Nylex
LQ Addict
 
Registered: Jul 2003
Location: London, UK
Distribution: Slackware
Posts: 7,464

Rep: Reputation: Disabled
Running "modprobe fat" is supposed to load the kernel module fat. If it just returned you to a prompt, then that means it loaded OK.
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



Similar Threads
Thread Thread Starter Forum Replies Last Post
GRUB won't load windows partition - root (hd0,0), Filesystem type unknown partition.. cillm527 Linux - Software 4 04-27-2008 06:44 AM
Messed up partition table and Windows' partition boot sector pyromithrandir Linux - General 32 04-08-2006 12:26 PM
How can I access files in my Windows 98 partition from my Linux partition, /w BASH? Fabyfakid Linux - Newbie 4 09-17-2004 11:05 PM
What is the code to copy a file from my windows partition to my linux partition? THEBIGFISH Linux - Newbie 3 03-15-2004 10:14 PM
How do I install slackware on a partition made by partition magic in windows bling bling Slackware 4 06-28-2003 11:16 PM

LinuxQuestions.org > Forums > Linux Forums > Linux - Newbie

All times are GMT -5. The time now is 04:06 AM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Open Source Consulting | Domain Registration