LinuxQuestions.org
Share your knowledge at the LQ Wiki.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Networking
User Name
Password
Linux - Networking This forum is for any issue related to networks or networking.
Routing, network cards, OSI, etc. Anything is fair game.

Notices


Reply
  Search this Thread
Old 09-23-2013, 12:21 PM   #1
CWood
Member
 
Registered: Oct 2011
Distribution: Slackware
Posts: 45

Rep: Reputation: Disabled
Unable to connect to the wifi in Linux Mint 15 (XFCE)


So, I'm trying to install Linux Mint 15 (XFCE) for my brother, who has finally had enough of Windoze. Huzzah!

I got it to boot into the live CD just fine, however could not connect to the WIFI. As there was only 1 bar of signal, I naturally assumed that it was the signal strength, so I found myself a USB extension cable, and moved the receiver closer to the wireless router. This increased the signal strength to full bars.

It still, however, would not connect. I know I entered the correct password, but it will spin for a while in the bottom right corner, sometimes display a window prompting for the password, which is already filled in (and correctly, at that), before more spinning, and a message appearing top right saying that I've been disconnected.

I've tried resetting the interface using ifconfig, and tried to connect manually using iwconfig (though couldn't seem to get wpa_supplicant to cooperate, so this quickly fell by the wayside). However, none of these things work. How do I fix this?

For the record, according to lsusb, the connector is: ID 050D:2103 Belkin Components F7D2102 802.11n N300 Micro Wireless Adapter v3000 (Realtek RTL8192CU)

Furthermore, this is the relevant lines from dmesg:
Code:
[   48.583671] cfg80211: Calling CRDA to update world regulatory domain
[   49.338004] cfg80211: World regulatory domain updated:
[   49.338008] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   49.338010] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   49.338012] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   49.338013] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   49.338015] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   49.338016] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   50.786183] rtl8192cu: Chip version 0x11
[   50.886437] rtl8192cu: MAC address: ec:1a:59:63:da:77
[   50.886440] rtl8192cu: Board Type 0
[   50.886685] rtlwifi: rx_max_size 15360, rx_urb_num 8, in_ep 1
[   50.886708] rtl8192cu: Loading firmware rtlwifi/rtl8192cufw.bin
[   50.886808] usbcore: registered new interface driver rtl8192cu
[   51.214361] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[   51.217414] rtlwifi: wireless switch is on
[   51.681532] forcedeth 0000:00:07.0: irq 43 for MSI/MSI-X
[   51.681557] forcedeth 0000:00:07.0 eth0: MSI enabled
[   51.681770] forcedeth 0000:00:07.0 eth0: no link during initialization
[   51.682187] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   51.682530] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   51.696962] rtl8192cu: MAC auto ON okay!
[   51.730503] rtl8192cu: Tx queue select: 0x05
[   52.107250] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   52.109320] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   57.207390] init: alsa-restore main process (2018) terminated with status 99
[  126.047728] wlan0: authenticate with 00:8e:f2:d2:22:3a
[  126.073077] wlan0: send auth to 00:8e:f2:d2:22:3a (try 1/3)
[  126.078905] wlan0: authenticated
[  126.082630] wlan0: associate with 00:8e:f2:d2:22:3a (try 1/3)
[  126.108210] wlan0: RX AssocResp from 00:8e:f2:d2:22:3a (capab=0x411 status=0 aid=7)
[  126.108288] wlan0: associated
[  126.108340] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  171.894512] wlan0: deauthenticating from 00:8e:f2:d2:22:3a by local choice (reason=3)
[  171.913293] cfg80211: Calling CRDA to update world regulatory domain
[  171.928685] cfg80211: World regulatory domain updated:
[  171.928688] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  171.928690] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  171.928691] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  171.928693] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  171.928694] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  171.928695] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  824.538469] usb 1-10: USB disconnect, device number 5
[  824.546096] rtlwifi: reg 0x102, usbctrl_vendorreq TimeOut! status:0xffffffed value=0x0
[  824.546112] rtlwifi: reg 0x422, usbctrl_vendorreq TimeOut! status:0xffffffed value=0x4d5
[  824.546123] rtlwifi: reg 0x542, usbctrl_vendorreq TimeOut! status:0xffffffed value=0x3903f2a
[  824.546135] rtlwifi: reg 0x608, usbctrl_vendorreq TimeOut! status:0xffffffed value=0x3f3f3f3f
[  834.581572] usb 1-10: new high-speed USB device number 6 using ehci-pci
[  834.714821] usb 1-10: New USB device found, idVendor=050d, idProduct=2103
[  834.714832] usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  834.714841] usb 1-10: Product: Belkin Wireless Adapter
[  834.714847] usb 1-10: Manufacturer: Realtek
[  834.714853] usb 1-10: SerialNumber: 00e04c000001
[  834.715560] rtl8192cu: Chip version 0x11
[  834.815947] rtl8192cu: MAC address: ec:1a:59:63:da:77
[  834.815958] rtl8192cu: Board Type 0
[  834.816191] rtlwifi: rx_max_size 15360, rx_urb_num 8, in_ep 1
[  834.816260] rtl8192cu: Loading firmware rtlwifi/rtl8192cufw.bin
[  834.816607] ieee80211 phy1: Selected rate control algorithm 'rtl_rc'
[  834.817568] rtlwifi: wireless switch is on
[  834.860341] rtl8192cu: MAC auto ON okay!
[  834.900111] rtl8192cu: Tx queue select: 0x05
[  835.269909] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  835.270247] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  843.210245] wlan1: authenticate with 00:8e:f2:d2:22:3a
[  843.237863] wlan1: send auth to 00:8e:f2:d2:22:3a (try 1/3)
[  843.242193] wlan1: authenticated
[  843.244390] wlan1: associate with 00:8e:f2:d2:22:3a (try 1/3)
[  843.263770] wlan1: RX AssocResp from 00:8e:f2:d2:22:3a (capab=0x411 status=0 aid=7)
[  843.263842] wlan1: associated
[  843.263893] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[  848.260065] wlan1: deauthenticating from 00:8e:f2:d2:22:3a by local choice (reason=3)
[  848.284931] cfg80211: Calling CRDA to update world regulatory domain
[  848.307252] cfg80211: World regulatory domain updated:
[  848.307255] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  848.307257] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  848.307258] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  848.307260] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  848.307261] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  848.307263] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  849.003064] wlan1: authenticate with 00:8e:f2:d2:22:3a
[  849.027478] wlan1: send auth to 00:8e:f2:d2:22:3a (try 1/3)
[  849.229784] wlan1: send auth to 00:8e:f2:d2:22:3a (try 2/3)
[  849.250773] wlan1: authenticated
[  849.253748] wlan1: associate with 00:8e:f2:d2:22:3a (try 1/3)
[  849.269615] wlan1: RX AssocResp from 00:8e:f2:d2:22:3a (capab=0x411 status=0 aid=7)
[  849.269724] wlan1: associated
[  896.127580] wlan1: deauthenticating from 00:8e:f2:d2:22:3a by local choice (reason=3)
[  896.171824] cfg80211: Calling CRDA to update world regulatory domain
[  896.177973] cfg80211: World regulatory domain updated:
[  896.177975] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  896.177977] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  896.177979] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  896.177980] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  896.177982] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  896.177983] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  991.687105] wlan1: authenticate with 00:8e:f2:d2:22:3a
[  991.712637] wlan1: send auth to 00:8e:f2:d2:22:3a (try 1/3)
[  991.913534] wlan1: send auth to 00:8e:f2:d2:22:3a (try 2/3)
[  991.941110] wlan1: authenticated
[  991.941564] wlan1: associate with 00:8e:f2:d2:22:3a (try 1/3)
[  992.145002] wlan1: associate with 00:8e:f2:d2:22:3a (try 2/3)
[  992.348506] wlan1: associate with 00:8e:f2:d2:22:3a (try 3/3)
[  992.552009] wlan1: association with 00:8e:f2:d2:22:3a timed out
[ 1794.667550] rtl8192cu: MAC auto ON okay!
[ 1794.705462] rtl8192cu: Tx queue select: 0x05
[ 1795.184944] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 2960.664259] rtl8192cu: MAC auto ON okay!
[ 2960.697684] rtl8192cu: Tx queue select: 0x05
[ 2961.176618] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 3004.047023] rtl8192cu: MAC auto ON okay!
[ 3004.079691] rtl8192cu: Tx queue select: 0x05
[ 3004.453208] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 3027.561891] rtl8192cu: MAC auto ON okay!
[ 3027.594563] rtl8192cu: Tx queue select: 0x05
[ 3027.963976] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 3046.320905] wlan1: authenticate with 00:8e:f2:d2:22:3a
[ 3046.345298] wlan1: send auth to 00:8e:f2:d2:22:3a (try 1/3)
[ 3046.354977] wlan1: authenticated
[ 3046.355774] wlan1: associate with 00:8e:f2:d2:22:3a (try 1/3)
[ 3046.366574] wlan1: RX AssocResp from 00:8e:f2:d2:22:3a (capab=0x411 status=0 aid=7)
[ 3046.366656] wlan1: associated
[ 3046.366711] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[ 3046.367416] wlan1: disassociating from 00:8e:f2:d2:22:3a by local choice (reason=3)
[ 3046.384677] cfg80211: Calling CRDA to update world regulatory domain
[ 3046.396057] cfg80211: World regulatory domain updated:
[ 3046.396064] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 3046.396071] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3046.396077] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 3046.396083] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 3046.396088] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3046.396093] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3047.190541] wlan1: authenticate with 00:8e:f2:d2:22:3a
[ 3047.215416] wlan1: send auth to 00:8e:f2:d2:22:3a (try 1/3)
[ 3047.231339] wlan1: authenticated
[ 3047.233686] wlan1: associate with 00:8e:f2:d2:22:3a (try 1/3)
[ 3047.251043] wlan1: RX AssocResp from 00:8e:f2:d2:22:3a (capab=0x411 status=0 aid=7)
[ 3047.251114] wlan1: associated
[ 3047.251646] wlan1: disassociating from 00:8e:f2:d2:22:3a by local choice (reason=3)
[ 3047.266898] cfg80211: Calling CRDA to update world regulatory domain
[ 3047.277725] cfg80211: World regulatory domain updated:
[ 3047.277727] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 3047.277729] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3047.277731] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 3047.277732] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 3047.277734] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3047.277735] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3048.072918] wlan1: authenticate with 00:8e:f2:d2:22:3a
[ 3048.096766] wlan1: send auth to 00:8e:f2:d2:22:3a (try 1/3)
[ 3048.099212] wlan1: authenticated
[ 3048.099541] wlan1: associate with 00:8e:f2:d2:22:3a (try 1/3)
[ 3048.142243] wlan1: RX AssocResp from 00:8e:f2:d2:22:3a (capab=0x411 status=0 aid=7)
[ 3048.142323] wlan1: associated
[ 3048.143016] wlan1: disassociating from 00:8e:f2:d2:22:3a by local choice (reason=3)
[ 3048.162833] cfg80211: Calling CRDA to update world regulatory domain
[ 3048.173621] cfg80211: World regulatory domain updated:
[ 3048.173629] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 3048.173636] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3048.173642] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 3048.173647] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 3048.173652] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3048.173657] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3048.966190] wlan1: authenticate with 00:8e:f2:d2:22:3a
[ 3048.990762] wlan1: send auth to 00:8e:f2:d2:22:3a (try 1/3)
[ 3048.994282] wlan1: authenticated
[ 3048.997326] wlan1: associate with 00:8e:f2:d2:22:3a (try 1/3)
[ 3049.025713] wlan1: RX AssocResp from 00:8e:f2:d2:22:3a (capab=0x411 status=0 aid=7)
[ 3049.025789] wlan1: associated
[ 3049.026087] wlan1: disassociating from 00:8e:f2:d2:22:3a by local choice (reason=3)
[ 3049.042045] cfg80211: Calling CRDA to update world regulatory domain
[ 3049.052948] cfg80211: World regulatory domain updated:
[ 3049.052955] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 3049.052962] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3049.052969] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 3049.052974] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 3049.052979] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3049.052984] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3049.847933] wlan1: authenticate with 00:8e:f2:d2:22:3a
[ 3049.872682] wlan1: send auth to 00:8e:f2:d2:22:3a (try 1/3)
[ 3050.074673] wlan1: send auth to 00:8e:f2:d2:22:3a (try 2/3)
[ 3050.278178] wlan1: send auth to 00:8e:f2:d2:22:3a (try 3/3)
[ 3050.481679] wlan1: authentication with 00:8e:f2:d2:22:3a timed out
[ 3072.575676] rtl8192cu: MAC auto ON okay!
[ 3072.608347] rtl8192cu: Tx queue select: 0x05
[ 3072.981732] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 3073.689774] wlan1: authenticate with 00:8e:f2:d2:22:3a
[ 3073.716247] wlan1: send auth to 00:8e:f2:d2:22:3a (try 1/3)
[ 3073.731299] wlan1: authenticated
[ 3073.732965] wlan1: associate with 00:8e:f2:d2:22:3a (try 1/3)
[ 3073.737522] wlan1: RX AssocResp from 00:8e:f2:d2:22:3a (capab=0x411 status=0 aid=7)
[ 3073.737602] wlan1: associated
[ 3073.737653] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[ 3083.733276] wlan1: disassociating from 00:8e:f2:d2:22:3a by local choice (reason=3)
[ 3083.747054] wlan1: deauthenticating from 00:8e:f2:d2:22:3a by local choice (reason=3)
[ 3083.747644] cfg80211: Calling CRDA to update world regulatory domain
[ 3083.759409] cfg80211: World regulatory domain updated:
[ 3083.759417] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 3083.759424] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3083.759430] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 3083.759436] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 3083.759441] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3083.759446] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3084.551296] wlan1: authenticate with 00:8e:f2:d2:22:3a
[ 3084.576490] wlan1: send auth to 00:8e:f2:d2:22:3a (try 1/3)
[ 3084.579829] wlan1: authenticated
[ 3084.582487] wlan1: associate with 00:8e:f2:d2:22:3a (try 1/3)
[ 3084.594172] wlan1: RX AssocResp from 00:8e:f2:d2:22:3a (capab=0x411 status=0 aid=7)
[ 3084.594244] wlan1: associated
[ 3094.587856] wlan1: disassociating from 00:8e:f2:d2:22:3a by local choice (reason=3)
[ 3094.603282] cfg80211: Calling CRDA to update world regulatory domain
[ 3094.605361] wlan1: deauthenticating from 00:8e:f2:d2:22:3a by local choice (reason=3)
[ 3094.614958] cfg80211: World regulatory domain updated:
[ 3094.614966] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 3094.614973] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3094.614979] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 3094.614985] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 3094.614990] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3094.614995] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3095.408750] wlan1: authenticate with 00:8e:f2:d2:22:3a
[ 3095.434610] wlan1: send auth to 00:8e:f2:d2:22:3a (try 1/3)
[ 3095.459407] wlan1: authenticated
[ 3095.459925] wlan1: associate with 00:8e:f2:d2:22:3a (try 1/3)
[ 3095.472254] wlan1: RX AssocResp from 00:8e:f2:d2:22:3a (capab=0x411 status=0 aid=7)
[ 3095.472327] wlan1: associated
[ 3098.542578] wlan1: deauthenticating from 00:8e:f2:d2:22:3a by local choice (reason=3)
[ 3098.565137] cfg80211: Calling CRDA to update world regulatory domain
[ 3098.568662] cfg80211: World regulatory domain updated:
[ 3098.568665] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 3098.568667] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3098.568669] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 3098.568670] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 3098.568671] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3098.568673] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3099.370761] wlan1: authenticate with 00:8e:f2:d2:22:3a
[ 3099.396512] wlan1: send auth to 00:8e:f2:d2:22:3a (try 1/3)
[ 3099.398399] wlan1: authenticated
[ 3099.402358] wlan1: associate with 00:8e:f2:d2:22:3a (try 1/3)
[ 3099.429098] wlan1: RX AssocResp from 00:8e:f2:d2:22:3a (capab=0x411 status=0 aid=7)
[ 3099.429179] wlan1: associated
[ 3099.429506] wlan1: disassociating from 00:8e:f2:d2:22:3a by local choice (reason=3)
[ 3099.455821] wlan1: deauthenticating from 00:8e:f2:d2:22:3a by local choice (reason=3)
[ 3099.455986] cfg80211: Calling CRDA to update world regulatory domain
[ 3099.460912] cfg80211: World regulatory domain updated:
[ 3099.460916] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 3099.460919] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3099.460922] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 3099.460924] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 3099.460926] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3099.460928] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3100.264540] wlan1: authenticate with 00:8e:f2:d2:22:3a
[ 3100.289726] wlan1: send auth to 00:8e:f2:d2:22:3a (try 1/3)
[ 3100.491613] wlan1: send auth to 00:8e:f2:d2:22:3a (try 2/3)
[ 3100.695115] wlan1: send auth to 00:8e:f2:d2:22:3a (try 3/3)
[ 3100.898620] wlan1: authentication with 00:8e:f2:d2:22:3a timed out
[ 3106.984565] wlan1: authenticate with 00:8e:f2:d2:22:3a
[ 3107.011129] wlan1: send auth to 00:8e:f2:d2:22:3a (try 1/3)
[ 3107.014955] wlan1: authenticated
[ 3107.015747] wlan1: associate with 00:8e:f2:d2:22:3a (try 1/3)
[ 3107.030050] wlan1: RX AssocResp from 00:8e:f2:d2:22:3a (capab=0x411 status=0 aid=7)
[ 3107.030131] wlan1: associated
[ 3107.030911] wlan1: disassociating from 00:8e:f2:d2:22:3a by local choice (reason=3)
[ 3107.056652] cfg80211: Calling CRDA to update world regulatory domain
[ 3107.057201] wlan1: deauthenticating from 00:8e:f2:d2:22:3a by local choice (reason=3)
[ 3107.068916] cfg80211: World regulatory domain updated:
[ 3107.068924] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 3107.068931] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3107.068937] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 3107.068943] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 3107.068948] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3107.068953] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3107.862460] wlan1: authenticate with 00:8e:f2:d2:22:3a
[ 3107.887558] wlan1: send auth to 00:8e:f2:d2:22:3a (try 1/3)
[ 3107.890944] wlan1: authenticated
[ 3107.893595] wlan1: associate with 00:8e:f2:d2:22:3a (try 1/3)
[ 3107.932475] wlan1: RX AssocResp from 00:8e:f2:d2:22:3a (capab=0x411 status=0 aid=7)
[ 3107.932550] wlan1: associated
[ 3107.933261] wlan1: disassociating from 00:8e:f2:d2:22:3a by local choice (reason=3)
[ 3107.958247] cfg80211: Calling CRDA to update world regulatory domain
[ 3107.959096] wlan1: deauthenticating from 00:8e:f2:d2:22:3a by local choice (reason=3)
[ 3107.967417] cfg80211: World regulatory domain updated:
[ 3107.967425] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 3107.967432] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3107.967439] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 3107.967444] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 3107.967449] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3107.967454] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3108.764276] wlan1: authenticate with 00:8e:f2:d2:22:3a
[ 3108.789098] wlan1: send auth to 00:8e:f2:d2:22:3a (try 1/3)
[ 3108.791864] wlan1: authenticated
[ 3108.795493] wlan1: associate with 00:8e:f2:d2:22:3a (try 1/3)
[ 3108.806840] wlan1: RX AssocResp from 00:8e:f2:d2:22:3a (capab=0x411 status=0 aid=7)
[ 3108.806912] wlan1: associated
[ 3108.807251] wlan1: disassociating from 00:8e:f2:d2:22:3a by local choice (reason=3)
[ 3108.820801] cfg80211: Calling CRDA to update world regulatory domain
[ 3108.823088] wlan1: deauthenticating from 00:8e:f2:d2:22:3a by local choice (reason=3)
[ 3108.831955] cfg80211: World regulatory domain updated:
[ 3108.831962] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 3108.831969] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3108.831975] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 3108.831981] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 3108.831986] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3108.831991] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3109.626171] wlan1: authenticate with 00:8e:f2:d2:22:3a
[ 3109.650938] wlan1: send auth to 00:8e:f2:d2:22:3a (try 1/3)
[ 3109.852767] wlan1: send auth to 00:8e:f2:d2:22:3a (try 2/3)
[ 3110.056270] wlan1: send auth to 00:8e:f2:d2:22:3a (try 3/3)
[ 3110.259792] wlan1: authentication with 00:8e:f2:d2:22:3a timed out
Many thanks.
 
Old 09-23-2013, 01:07 PM   #2
business_kid
LQ Guru
 
Registered: Jan 2006
Location: Ireland
Distribution: Slackware, Slarm64 & Android
Posts: 17,270

Rep: Reputation: 2553Reputation: 2553Reputation: 2553Reputation: 2553Reputation: 2553Reputation: 2553Reputation: 2553Reputation: 2553Reputation: 2553Reputation: 2553Reputation: 2553
Did you pass the passphrase through wpa_passphrase?

man wpa_passphrase
 
Old 09-23-2013, 01:11 PM   #3
CWood
Member
 
Registered: Oct 2011
Distribution: Slackware
Posts: 45

Original Poster
Rep: Reputation: Disabled
The primary problem with getting wpa_supplicant running was that it already was running, just not on the right interface, and it could not be killed. Ergo, conflicts ensued.
 
Old 09-24-2013, 11:30 AM   #4
CWood
Member
 
Registered: Oct 2011
Distribution: Slackware
Posts: 45

Original Poster
Rep: Reputation: Disabled
So, I have since installed backports, from http://drvbp1.linux-foundation.org/~...tml/backports/, on the assumption that there was a driver issue. However, this caused wlan0 to disappear entirely. Naturally, I assumed that this was because the module was not loaded. So, I ran modprobe rtlwifi. This resulted in an "exec format error"... I used backports 3.10.4-1, on the 3.8.0 kernel.
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



Similar Threads
Thread Thread Starter Forum Replies Last Post
wifi cannot connect RTL8188ce mint xfce S. Chapelin Linux - Laptop and Netbook 3 10-16-2012 03:52 PM
Linux mint 12 will not connect to wifi internet or android wifi tethers wilspeak Linux - General 4 06-06-2012 01:40 AM
Unable to connect to password encrypted network on Linux Mint 12 with Lenovo B570 dworwood Linux - Wireless Networking 0 03-10-2012 11:43 AM
[SOLVED] Unable to connect to wireless networks on HPG60 running Linux Mint 11 Micheil Linux - Wireless Networking 2 01-03-2012 08:35 AM
Unable to Connect to Internet using Linux Mint. MexDeath Linux - Networking 8 08-13-2009 12:04 AM

LinuxQuestions.org > Forums > Linux Forums > Linux - Networking

All times are GMT -5. The time now is 11:18 PM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Open Source Consulting | Domain Registration