LinuxQuestions.org - Stuck trying to use Piranha and LVS

Is this networking? Is this server? I figured networking works...

Anyway, I'm trying to get LVS up and running on CentOS 5.3 x86-64. Everything setup fine and went according to documentation here:

http://www.centos.org/docs/5/html/Vi...ion/index.html

Except when I actually go to start the pulse service, I get the following error:

Starting pulse: pulse: no active lvs services defined in /etc/sysconfig/ha/lvs.cf [FAILED]

This is my first adventure into using LVS for load balancing, so I'm not sure where to go next. For reference here is my lvs.conf:

Code:

serial_no = 26

primary = 192.168.16.210

primary_private = 10.3.0.1

service = lvs

backup_active = 0

backup = 192.168.16.247

backup_private = 10.3.0.2

heartbeat = 1

heartbeat_port = 539

keepalive = 6

deadtime = 18

network = nat

nat_router = 10.3.0.3 eth0:1

nat_nmask = 255.255.0.0

debug_level = NONE

monitor_links = 0

syncdaemon = 0

virtual www.testdomain.com {

    active = 0

    address = 192.168.16.221 eth1:1

    vip_nmask = 255.255.255.0

    port = 80

    use_regex = 0

    load_monitor = none

    scheduler = wlc

    protocol = tcp

    timeout = 6

    reentry = 15

    quiesce_server = 0

    server web1.prod.testdomain.com {

        address = 10.3.1.1

        active = 0

        weight = 1

    }

    server web2.prod.testdomain.com {

        address = 10.3.1.2

        active = 0

        weight = 1

    }

}

Thoughts or opinions?

Thanks!