Squid Access Control
Hi all
I have configured squid and I have 2 subnets to serve the proxy services for, however after writing the access lists when I give a "service squid status" command I get the following warning ************************ squid (pid 3129 3127) is running.. 2002/09/28 12:51:15| aclParseIpData: WARNING: Netmask masks away part of the specified IP in '192.168.172.1-192.168.172.254/24' 2002/09/28 12:51:15| aclParseIpData: WARNING: Netmask masks away part of the specified IP in '192.168.6.171-192.168.6.254/24' *********************************************** Am I giving a wrong subnet mask, |
aaron,
It is a little hard to guess from the post, can we have the relevant section from the conf file. My immediate thought however is that the second range has an issue with a netmask. It states that the subnet starts at 192.168.6.171 and uses a mask of /24 which would not end at 192.168.6.254 if this is the subnet you are after you would need a netmask to suit, now i suck at working out netmasks so I wont embasses myself by giving you the wrong figure, there are calculators and the like about. Rich |
All times are GMT -5. The time now is 06:59 PM. |