LinuxQuestions.org
Help answer threads with 0 replies.
Home Forums Tutorials Articles Register
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Networking
Reload this Page rp-pppoe problem: it says im connected but can't ping anything
User Name
Password
Linux - Networking This forum is for any issue related to networks or networking.
Routing, network cards, OSI, etc. Anything is fair game.

Notices


Reply
  Search this Thread
Old 05-04-2004, 09:48 PM   #1
johnnybezak
Member
 
Registered: Oct 2003
Location: Bendigo, Australia
Distribution: Have used Yellow Dog, thinking Mandrake for X86 System
Posts: 46

Rep: Reputation: 15
rp-pppoe problem: it says im connected but can't ping anything

hey guys im getting sort of desperate here any help would be greatly appreciated.

im using gentoo. ive just got an adsl connection. its a dlink 300 connected through a switch, my mates on the network are connected with PPPoE, i downloaded and installed rp-pppoe w/out any error messages. i ran adsl-setup, then start, which it does "...connected" but i cant ping any servers, or my dns server. here are the dumps from the things i thought had something to do with it, if anything else can help please tell me. thanks in advance.

(one last note i had to change the /etc/conf.d/net from "up" to "dhcp" so i could connect to other computers on the lan)

ok here are the dumps

##These are the contents of /etc/resolv.conf

nameserver 203.0.178.91

##These are the contents of my /etc/conf.d/net

# /etc/conf.d/net:
# $Header: /home/cvsroot/gentoo-src/rc-scripts/etc/conf.d/net,v 1.7 2002/11/18 19:39:22 azarah Exp $

# Global config file for net.* rc-scripts

# This is basically the ifconfig argument without the ifconfig $iface
#
iface_eth0="up"
#iface_eth0="192.168.0.2 broadcast 192.168.0.255 netmask 255.255.0.0"

# For DHCP set iface_eth? to "dhcp"
# For passing options to dhcpcd use dhcpcd_eth?
#
#iface_eth0="dhcp"
#dhcpcd_eth0="..."

# For adding aliases to a interface
#
#alias_eth0="192.168.0.3 192.168.0.4"

# NB: The next is only used for aliases.
#
# To add a custom netmask/broadcast address to created aliases,
# uncomment and change accordingly. Leave commented to assign
# defaults for that interface.
#
#broadcast_eth0="192.168.0.255 192.168.0.255"
#netmask_eth0="255.255.255.0 255.255.255.0"


# For setting the default gateway
#
#gateway="eth0/192.168.0.1"



##This is what i get after doing "adsl-start", it seems like it is working but is isnt

/sbin/ifconfig
eth0 Link encap:Ethernet HWaddr 00:08:A1:362:14
inet6 addr: fe80::208:a1ff:fe36:d214/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:259 errors:0 dropped:0 overruns:0 frame:0
TX packets:32 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:27722 (27.0 Kb) TX bytes:2209 (2.1 Kb)
Interrupt:19 Base address:0xd000

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:8 errors:0 dropped:0 overruns:0 frame:0
TX packets:8 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:400 (400.0 b) TX bytes:400 (400.0 b)

ppp0 Link encap:Point-to-Point Protocol
inet addr:203.217.42.56 P-t-P:203.55.229.88 Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1492 Metric:1
RX packets:3 errors:0 dropped:0 overruns:0 frame:0
TX packets:10 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:3
RX bytes:30 (30.0 b) TX bytes:499 (499.0 b)

##This is what i get when i run DEBUG=1 adsl-start


* The following section contains information about your system
Wed May 5 11:02:11 EST 2004
Output of uname -a
Linux gentoobox 2.4.25 #1 Fri Feb 20 06:14:47 UTC 2004 i686 AMD Athlon(tm) XP 2600+ AuthenticAMD GNU/Linux
---------------------------------------------
* The following section contains information about your network
* interfaces. The one you chose for PPPoE should contain the words:
* 'UP' and 'RUNNING'. If it does not, you probably have an Ethernet
* driver problem.
Output of ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:08:A1:362:14
inet addr:192.168.0.2 Bcast:192.168.0.255 Mask:255.255.255.0
inet6 addr: fe80::208:a1ff:fe36:d214/64 Scope:Link
UP BROADCAST NOTRAILERS RUNNING MULTICAST MTU:1500 Metric:1
RX packets:563 errors:0 dropped:0 overruns:0 frame:0
TX packets:2888 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:121589 (118.7 Kb) TX bytes:348956 (340.7 Kb)
Interrupt:19 Base address:0xd000

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:781 errors:0 dropped:0 overruns:0 frame:0
TX packets:781 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:43304 (42.2 Kb) TX bytes:43304 (42.2 Kb)

ppp0 Link encap:Point-to-Point Protocol
inet addr:203.217.45.3 P-t-P:203.55.229.88 Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1492 Metric:1
RX packets:18 errors:0 dropped:0 overruns:0 frame:0
TX packets:3 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:3
RX bytes:1670 (1.6 Kb) TX bytes:30 (30.0 b)

sit0 Link encap:IPv6-in-IPv4
NOARP MTU:1480 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)

---------------------------------------------
* The following section contains information about kernel modules
* If the module for your Ethernet card is 'tulip', you might
* want to look for an updated version at http://www.scyld.com
Output of lsmod
Module Size Used by Tainted: P
ppp_synctty 5952 0 (unused)
ppp_async 7456 1 (autoclean)
ppp_generic 19868 3 (autoclean) [ppp_synctty ppp_async]
slhc 5008 0 (autoclean) [ppp_generic]
sg 30988 0 (autoclean) (unused)
st 27308 0 (autoclean) (unused)
sr_mod 15064 0 (autoclean) (unused)
sd_mod 11724 0 (autoclean) (unused)
scsi_mod 92500 4 (autoclean) [sg st sr_mod sd_mod]
8139too 14984 1
mii 2336 0 [8139too]
via82cxxx_audio 19320 0
ac97_codec 12168 0 [via82cxxx_audio]
soundcore 3396 2 [via82cxxx_audio]
nvidia 1967136 6
input 3200 0 (unused)
uhci 24304 0 (unused)
ehci-hcd 17608 0 (unused)
usbcore 57920 1 [uhci ehci-hcd]
---------------------------------------------
* The following section lists your routing table.
* If you have an entry which starts with '0.0.0.0', you probably
* have defined a default route and gateway, and pppd will
* not create a default route using your ISP. Try getting
* rid of this route.
Output of netstat -n -r
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window irtt Iface
203.55.229.88 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0
192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
127.0.0.0 127.0.0.1 255.0.0.0 UG 0 0 0 lo
0.0.0.0 192.168.0.254 0.0.0.0 UG 0 0 0 eth0
---------------------------------------------
Contents of /etc/resolv.conf
* The following section lists DNS setup.
* If you can browse by IP address, but not name, suspect
* a DNS problem.
nameserver 203.0.178.91
---------------------------------------------
* The following section lists /etc/ppp/options.
* You should have NOTHING in that file.
Contents of /etc/ppp/options
lock
---------------------------------------------
* The following section identifies your Ethernet interface
* and user name. Some ISP's need 'username'; others
* need 'username@isp.com'. Try both
ETH=eth0; USER=996drummond@iinet.net.au
---------------------------------------------
* The following section shows the pppd command we will invoke
pppd invocation
/usr/bin/setsid /usr/sbin/pppd pty '/usr/sbin/pppoe -p /var/run/pppoe.conf-adsl.pid.pppoe -I eth0 -T 80 -U -m 1412 ' noipdefault noauth default-asyncmap defaultroute hide-password nodetach mtu 1492 mru 1492 noaccomp noccp nobsdcomp nodeflate nopcomp novj novjccomp user 996drummond@iinet.net.au lcp-echo-interval 20 lcp-echo-failure 3 debug
---------------------------------------------
using channel 4
Using interface ppp1
Connect: ppp1 <--> /dev/pts/4
sent [LCP ConfReq id=0x1 <mru 1492> <magic 0x5e740f45>]
sent [LCP ConfReq id=0x1 <mru 1492> <magic 0x5e740f45>]
sent [LCP ConfReq id=0x1 <mru 1492> <magic 0x5e740f45>]
sent [LCP ConfReq id=0x1 <mru 1492> <magic 0x5e740f45>]
sent [LCP ConfReq id=0x1 <mru 1492> <magic 0x5e740f45>]
sent [LCP ConfReq id=0x1 <mru 1492> <magic 0x5e740f45>]
sent [LCP ConfReq id=0x1 <mru 1492> <magic 0x5e740f45>]
sent [LCP ConfReq id=0x1 <mru 1492> <magic 0x5e740f45>]
sent [LCP ConfReq id=0x1 <mru 1492> <magic 0x5e740f45>]
sent [LCP ConfReq id=0x1 <mru 1492> <magic 0x5e740f45>]
LCP: timeout sending Config-Requests
Connection terminated.
Waiting for 1 child processes...
script /usr/sbin/pppoe -p /var/run/pppoe.conf-adsl.pid.pppoe -I eth0 -T 80 -U -m 1412 -D /tmp/pppoe-debug-10682/pppoe-debug.txt-0, pid 10740
pppoe: Timeout waiting for PADO packets
Script /usr/sbin/pppoe -p /var/run/pppoe.conf-adsl.pid.pppoe -I eth0 -T 80 -U -m 1412 -D /tmp/pppoe-debug-10682/pppoe-debug.txt-0 finished (pid 10740), status = 0x100
---------------------------------------------
* The following section is an extract from your log.
* Look for error messages from pppd, such as
* a lack of kernel support for PPP, authentication failure
* etc.
Extract from /var/log/messages
May 5 10:52:18 gentoobox pppd[10624]: pppd 2.4.1 started by root, uid 0
May 5 10:52:18 gentoobox pppd[10624]: using channel 3
May 5 10:52:18 gentoobox divert: not allocating divert_blk for non-ethernet device ppp1
May 5 10:52:18 gentoobox pppd[10624]: Using interface ppp1
May 5 10:52:18 gentoobox pppd[10624]: Connect: ppp1 <--> /dev/pts/3
May 5 10:52:19 gentoobox pppd[10624]: sent [LCP ConfReq id=0x1 <mru 1492> <magic 0x5ec2faf1>]
May 5 10:52:22 gentoobox pppd[10624]: sent [LCP ConfReq id=0x1 <mru 1492> <magic 0x5ec2faf1>]
May 5 10:52:25 gentoobox pppd[10624]: sent [LCP ConfReq id=0x1 <mru 1492> <magic 0x5ec2faf1>]
May 5 10:52:28 gentoobox pppd[10624]: sent [LCP ConfReq id=0x1 <mru 1492> <magic 0x5ec2faf1>]
May 5 10:52:31 gentoobox pppd[10546]: sent [LCP EchoReq id=0x2 magic=0xf76d17ac]
May 5 10:52:31 gentoobox pppd[10546]: rcvd [LCP EchoRep id=0x2 magic=0x3149835d]
May 5 10:52:31 gentoobox pppd[10624]: sent [LCP ConfReq id=0x1 <mru 1492> <magic 0x5ec2faf1>]
May 5 10:52:34 gentoobox pppd[10624]: sent [LCP ConfReq id=0x1 <mru 1492> <magic 0x5ec2faf1>]
May 5 10:52:37 gentoobox pppd[10624]: sent [LCP ConfReq id=0x1 <mru 1492> <magic 0x5ec2faf1>]
May 5 10:52:40 gentoobox pppd[10624]: sent [LCP ConfReq id=0x1 <mru 1492> <magic 0x5ec2faf1>]
May 5 10:52:43 gentoobox pppd[10624]: sent [LCP ConfReq id=0x1 <mru 1492> <magic 0x5ec2faf1>]
May 5 10:52:46 gentoobox pppd[10624]: sent [LCP ConfReq id=0x1 <mru 1492> <magic 0x5ec2faf1>]
May 5 10:52:49 gentoobox pppd[10624]: LCP: timeout sending Config-Requests
May 5 10:52:49 gentoobox pppd[10624]: Connection terminated.
May 5 10:52:49 gentoobox pppd[10624]: Waiting for 1 child processes...
May 5 10:52:49 gentoobox pppd[10624]: script /usr/sbin/pppoe -p /var/run/pppoe.conf-adsl.pid.pppoe -I eth0 -T 80 -U -m 1412 -D /tmp/pppoe-debug-10567/pppoe-debug.txt-0, pid 10625
May 5 10:52:49 gentoobox divert: no divert_blk to free, ppp1 not ethernet
May 5 10:52:51 gentoobox pppd[10546]: sent [LCP EchoReq id=0x3 magic=0xf76d17ac]
May 5 10:52:51 gentoobox pppd[10546]: rcvd [LCP EchoRep id=0x3 magic=0x3149835d]
May 5 10:52:52 gentoobox pppd[10546]: rcvd [LCP EchoReq id=0x2 magic=0x3149835d 05 06 31 49]
May 5 10:52:52 gentoobox pppd[10546]: sent [LCP EchoRep id=0x2 magic=0xf76d17ac 6d 6f 6e 64]
May 5 10:52:53 gentoobox pppoe[10625]: Timeout waiting for PADO packets
May 5 10:52:53 gentoobox pppd[10624]: Script /usr/sbin/pppoe -p /var/run/pppoe.conf-adsl.pid.pppoe -I eth0 -T 80 -U -m 1412 -D /tmp/pppoe-debug-10567/pppoe-debug.txt-0 finished (pid 10625), status = 0x100
May 5 10:52:53 gentoobox pppd[10624]: Exit.
May 5 10:53:11 gentoobox pppd[10546]: sent [LCP EchoReq id=0x4 magic=0xf76d17ac]
May 5 10:53:11 gentoobox pppd[10546]: rcvd [LCP EchoRep id=0x4 magic=0x3149835d]
May 5 10:53:12 gentoobox pppd[10546]: rcvd [LCP EchoReq id=0x3 magic=0x3149835d 05 06 31 49]
May 5 10:53:12 gentoobox pppd[10546]: sent [LCP EchoRep id=0x3 magic=0xf76d17ac 6d 6f 6e 64]
May 5 10:53:31 gentoobox pppd[10546]: sent [LCP EchoReq id=0x5 magic=0xf76d17ac]
May 5 10:53:31 gentoobox pppd[10546]: rcvd [LCP EchoRep id=0x5 magic=0x3149835d]
May 5 10:53:32 gentoobox pppd[10546]: rcvd [LCP EchoReq id=0x4 magic=0x3149835d 05 06 31 49]
May 5 10:53:32 gentoobox pppd[10546]: sent [LCP EchoRep id=0x4 magic=0xf76d17ac 6d 6f 6e 64]
May 5 10:53:51 gentoobox pppd[10546]: sent [LCP EchoReq id=0x6 magic=0xf76d17ac]
May 5 10:53:51 gentoobox pppd[10546]: rcvd [LCP EchoRep id=0x6 magic=0x3149835d]
May 5 10:54:11 gentoobox pppd[10546]: sent [LCP EchoReq id=0x7 magic=0xf76d17ac]
May 5 10:54:11 gentoobox pppd[10546]: rcvd [LCP EchoRep id=0x7 magic=0x3149835d]
May 5 10:54:31 gentoobox pppd[10546]: sent [LCP EchoReq id=0x8 magic=0xf76d17ac]
May 5 10:54:31 gentoobox pppd[10546]: rcvd [LCP EchoRep id=0x8 magic=0x3149835d]
May 5 10:54:51 gentoobox pppd[10546]: sent [LCP EchoReq id=0x9 magic=0xf76d17ac]
May 5 10:54:51 gentoobox pppd[10546]: rcvd [LCP EchoRep id=0x9 magic=0x3149835d]
May 5 10:54:52 gentoobox pppd[10546]: rcvd [LCP EchoReq id=0x5 magic=0x3149835d 05 06 31 49]
May 5 10:54:52 gentoobox pppd[10546]: sent [LCP EchoRep id=0x5 magic=0xf76d17ac 6d 6f 6e 64]
May 5 10:55:11 gentoobox pppd[10546]: sent [LCP EchoReq id=0xa magic=0xf76d17ac]
May 5 10:55:11 gentoobox pppd[10546]: rcvd [LCP EchoRep id=0xa magic=0x3149835d]
May 5 10:55:12 gentoobox pppd[10546]: rcvd [LCP EchoReq id=0x6 magic=0x3149835d 05 06 31 49]
May 5 10:55:12 gentoobox pppd[10546]: sent [LCP EchoRep id=0x6 magic=0xf76d17ac 6d 6f 6e 64]
May 5 10:55:31 gentoobox pppd[10546]: sent [LCP EchoReq id=0xb magic=0xf76d17ac]
May 5 10:55:31 gentoobox pppd[10546]: rcvd [LCP EchoRep id=0xb magic=0x3149835d]
May 5 10:55:32 gentoobox pppd[10546]: rcvd [LCP EchoReq id=0x7 magic=0x3149835d 05 06 31 49]
May 5 10:55:32 gentoobox pppd[10546]: sent [LCP EchoRep id=0x7 magic=0xf76d17ac 6d 6f 6e 64]
May 5 10:55:51 gentoobox pppd[10546]: sent [LCP EchoReq id=0xc magic=0xf76d17ac]
May 5 10:55:51 gentoobox pppd[10546]: rcvd [LCP EchoRep id=0xc magic=0x3149835d]
May 5 10:55:52 gentoobox pppd[10546]: rcvd [LCP EchoReq id=0x8 magic=0x3149835d 05 06 31 49]
May 5 10:55:52 gentoobox pppd[10546]: sent [LCP EchoRep id=0x8 magic=0xf76d17ac 6d 6f 6e 64]
May 5 10:56:11 gentoobox pppd[10546]: sent [LCP EchoReq id=0xd magic=0xf76d17ac]
May 5 10:56:11 gentoobox pppd[10546]: rcvd [LCP EchoRep id=0xd magic=0x3149835d]
May 5 10:56:13 gentoobox pppd[10546]: rcvd [LCP EchoReq id=0x9 magic=0x3149835d 05 06 31 49]
May 5 10:56:13 gentoobox pppd[10546]: sent [LCP EchoRep id=0x9 magic=0xf76d17ac 6d 6f 6e 64]
May 5 10:56:31 gentoobox pppd[10546]: sent [LCP EchoReq id=0xe magic=0xf76d17ac]
May 5 10:56:31 gentoobox pppd[10546]: rcvd [LCP EchoRep id=0xe magic=0x3149835d]
May 5 10:56:33 gentoobox pppd[10546]: rcvd [LCP EchoReq id=0xa magic=0x3149835d 05 06 31 49]
May 5 10:56:33 gentoobox pppd[10546]: sent [LCP EchoRep id=0xa magic=0xf76d17ac 6d 6f 6e 64]
May 5 10:56:51 gentoobox pppd[10546]: sent [LCP EchoReq id=0xf magic=0xf76d17ac]
May 5 10:56:51 gentoobox pppd[10546]: rcvd [LCP EchoRep id=0xf magic=0x3149835d]
May 5 10:56:53 gentoobox pppd[10546]: rcvd [LCP EchoReq id=0xb magic=0x3149835d 05 06 31 49]
May 5 10:56:53 gentoobox pppd[10546]: sent [LCP EchoRep id=0xb magic=0xf76d17ac 6d 6f 6e 64]
May 5 10:57:11 gentoobox pppd[10546]: sent [LCP EchoReq id=0x10 magic=0xf76d17ac]
May 5 10:57:11 gentoobox pppd[10546]: rcvd [LCP EchoRep id=0x10 magic=0x3149835d]
May 5 10:57:13 gentoobox pppd[10546]: rcvd [LCP EchoReq id=0xc magic=0x3149835d 05 06 31 49]
May 5 10:57:13 gentoobox pppd[10546]: sent [LCP EchoRep id=0xc magic=0xf76d17ac 6d 6f 6e 64]
May 5 10:57:31 gentoobox pppd[10546]: sent [LCP EchoReq id=0x11 magic=0xf76d17ac]
May 5 10:57:31 gentoobox pppd[10546]: rcvd [LCP EchoRep id=0x11 magic=0x3149835d]
May 5 10:57:33 gentoobox pppd[10546]: rcvd [LCP EchoReq id=0xd magic=0x3149835d 05 06 31 49]
May 5 10:57:33 gentoobox pppd[10546]: sent [LCP EchoRep id=0xd magic=0xf76d17ac 6d 6f 6e 64]
May 5 10:57:51 gentoobox pppd[10546]: sent [LCP EchoReq id=0x12 magic=0xf76d17ac]
May 5 10:57:51 gentoobox pppd[10546]: rcvd [LCP EchoRep id=0x12 magic=0x3149835d]
May 5 10:58:11 gentoobox pppd[10546]: sent [LCP EchoReq id=0x13 magic=0xf76d17ac]
May 5 10:58:11 gentoobox pppd[10546]: rcvd [LCP EchoRep id=0x13 magic=0x3149835d]
May 5 10:58:31 gentoobox pppd[10546]: sent [LCP EchoReq id=0x14 magic=0xf76d17ac]
May 5 10:58:31 gentoobox pppd[10546]: rcvd [LCP EchoRep id=0x14 magic=0x3149835d]
May 5 10:58:33 gentoobox pppd[10546]: rcvd [LCP EchoReq id=0xe magic=0x3149835d 05 06 31 49]
May 5 10:58:33 gentoobox pppd[10546]: sent [LCP EchoRep id=0xe magic=0xf76d17ac 6d 6f 6e 64]
May 5 10:58:51 gentoobox pppd[10546]: sent [LCP EchoReq id=0x15 magic=0xf76d17ac]
May 5 10:58:51 gentoobox pppd[10546]: rcvd [LCP EchoRep id=0x15 magic=0x3149835d]
May 5 10:58:53 gentoobox pppd[10546]: rcvd [LCP EchoReq id=0xf magic=0x3149835d 05 06 31 49]
May 5 10:58:53 gentoobox pppd[10546]: sent [LCP EchoRep id=0xf magic=0xf76d17ac 6d 6f 6e 64]
May 5 10:59:11 gentoobox pppd[10546]: sent [LCP EchoReq id=0x16 magic=0xf76d17ac]
May 5 10:59:11 gentoobox pppd[10546]: rcvd [LCP EchoRep id=0x16 magic=0x3149835d]
May 5 10:59:31 gentoobox pppd[10546]: sent [LCP EchoReq id=0x17 magic=0xf76d17ac]
May 5 10:59:31 gentoobox pppd[10546]: rcvd [LCP EchoRep id=0x17 magic=0x3149835d]
May 5 10:59:51 gentoobox pppd[10546]: sent [LCP EchoReq id=0x18 magic=0xf76d17ac]
May 5 10:59:51 gentoobox pppd[10546]: rcvd [LCP EchoRep id=0x18 magic=0x3149835d]
May 5 10:59:53 gentoobox pppd[10546]: rcvd [LCP EchoReq id=0x10 magic=0x3149835d 05 06 31 49]
May 5 10:59:53 gentoobox pppd[10546]: sent [LCP EchoRep id=0x10 magic=0xf76d17ac 6d 6f 6e 64]
May 5 11:00:11 gentoobox pppd[10546]: sent [LCP EchoReq id=0x19 magic=0xf76d17ac]
May 5 11:00:11 gentoobox pppd[10546]: rcvd [LCP EchoRep id=0x19 magic=0x3149835d]
May 5 11:00:13 gentoobox pppd[10546]: rcvd [LCP EchoReq id=0x11 magic=0x3149835d 05 06 31 49]
May 5 11:00:13 gentoobox pppd[10546]: sent [LCP EchoRep id=0x11 magic=0xf76d17ac 6d 6f 6e 64]
May 5 11:00:31 gentoobox pppd[10546]: sent [LCP EchoReq id=0x1a magic=0xf76d17ac]
May 5 11:00:31 gentoobox pppd[10546]: rcvd [LCP EchoRep id=0x1a magic=0x3149835d]
May 5 11:00:33 gentoobox pppd[10546]: rcvd [LCP EchoReq id=0x12 magic=0x3149835d 05 06 31 49]
May 5 11:00:33 gentoobox pppd[10546]: sent [LCP EchoRep id=0x12 magic=0xf76d17ac 6d 6f 6e 64]
May 5 11:00:51 gentoobox pppd[10546]: sent [LCP EchoReq id=0x1b magic=0xf76d17ac]
May 5 11:00:51 gentoobox pppd[10546]: rcvd [LCP EchoRep id=0x1b magic=0x3149835d]
May 5 11:01:11 gentoobox pppd[10546]: sent [LCP EchoReq id=0x1c magic=0xf76d17ac]
May 5 11:01:11 gentoobox pppd[10546]: rcvd [LCP EchoRep id=0x1c magic=0x3149835d]
May 5 11:01:31 gentoobox pppd[10546]: sent [LCP EchoReq id=0x1d magic=0xf76d17ac]
May 5 11:01:31 gentoobox pppd[10546]: rcvd [LCP EchoRep id=0x1d magic=0x3149835d]
May 5 11:01:33 gentoobox pppd[10546]: rcvd [LCP EchoReq id=0x13 magic=0x3149835d 05 06 31 49]
May 5 11:01:33 gentoobox pppd[10546]: sent [LCP EchoRep id=0x13 magic=0xf76d17ac 6d 6f 6e 64]
May 5 11:01:51 gentoobox pppd[10546]: sent [LCP EchoReq id=0x1e magic=0xf76d17ac]
May 5 11:01:51 gentoobox pppd[10546]: rcvd [LCP EchoRep id=0x1e magic=0x3149835d]
May 5 11:01:53 gentoobox pppd[10546]: rcvd [LCP EchoReq id=0x14 magic=0x3149835d 05 06 31 49]
May 5 11:01:53 gentoobox pppd[10546]: sent [LCP EchoRep id=0x14 magic=0xf76d17ac 6d 6f 6e 64]
May 5 11:02:11 gentoobox pppd[10739]: pppd 2.4.1 started by root, uid 0
May 5 11:02:11 gentoobox pppd[10739]: using channel 4
May 5 11:02:11 gentoobox divert: not allocating divert_blk for non-ethernet device ppp1
May 5 11:02:11 gentoobox pppd[10739]: Using interface ppp1
May 5 11:02:11 gentoobox pppd[10739]: Connect: ppp1 <--> /dev/pts/4
May 5 11:02:11 gentoobox pppd[10546]: sent [LCP EchoReq id=0x1f magic=0xf76d17ac]
May 5 11:02:11 gentoobox pppd[10546]: rcvd [LCP EchoRep id=0x1f magic=0x3149835d]
May 5 11:02:12 gentoobox pppd[10739]: sent [LCP ConfReq id=0x1 <mru 1492> <magic 0x5e740f45>]
May 5 11:02:13 gentoobox pppd[10546]: rcvd [LCP EchoReq id=0x15 magic=0x3149835d 05 06 31 49]
May 5 11:02:13 gentoobox pppd[10546]: sent [LCP EchoRep id=0x15 magic=0xf76d17ac 6d 6f 6e 64]
May 5 11:02:15 gentoobox pppd[10739]: sent [LCP ConfReq id=0x1 <mru 1492> <magic 0x5e740f45>]
May 5 11:02:18 gentoobox pppd[10739]: sent [LCP ConfReq id=0x1 <mru 1492> <magic 0x5e740f45>]
May 5 11:02:21 gentoobox pppd[10739]: sent [LCP ConfReq id=0x1 <mru 1492> <magic 0x5e740f45>]
May 5 11:02:24 gentoobox pppd[10739]: sent [LCP ConfReq id=0x1 <mru 1492> <magic 0x5e740f45>]
May 5 11:02:27 gentoobox pppd[10739]: sent [LCP ConfReq id=0x1 <mru 1492> <magic 0x5e740f45>]
May 5 11:02:30 gentoobox pppd[10739]: sent [LCP ConfReq id=0x1 <mru 1492> <magic 0x5e740f45>]
May 5 11:02:31 gentoobox pppd[10546]: sent [LCP EchoReq id=0x20 magic=0xf76d17ac]
May 5 11:02:31 gentoobox pppd[10546]: rcvd [LCP EchoRep id=0x20 magic=0x3149835d]
May 5 11:02:33 gentoobox pppd[10739]: sent [LCP ConfReq id=0x1 <mru 1492> <magic 0x5e740f45>]
May 5 11:02:34 gentoobox pppd[10546]: rcvd [LCP EchoReq id=0x16 magic=0x3149835d 05 06 31 49]
May 5 11:02:34 gentoobox pppd[10546]: sent [LCP EchoRep id=0x16 magic=0xf76d17ac 6d 6f 6e 64]
May 5 11:02:36 gentoobox pppd[10739]: sent [LCP ConfReq id=0x1 <mru 1492> <magic 0x5e740f45>]
May 5 11:02:39 gentoobox pppd[10739]: sent [LCP ConfReq id=0x1 <mru 1492> <magic 0x5e740f45>]
May 5 11:02:42 gentoobox pppd[10739]: LCP: timeout sending Config-Requests
May 5 11:02:42 gentoobox pppd[10739]: Connection terminated.
May 5 11:02:42 gentoobox pppd[10739]: Waiting for 1 child processes...
May 5 11:02:42 gentoobox pppd[10739]: script /usr/sbin/pppoe -p /var/run/pppoe.conf-adsl.pid.pppoe -I eth0 -T 80 -U -m 1412 -D /tmp/pppoe-debug-10682/pppoe-debug.txt-0, pid 10740
May 5 11:02:42 gentoobox divert: no divert_blk to free, ppp1 not ethernet
May 5 11:02:46 gentoobox pppoe[10740]: Timeout waiting for PADO packets
May 5 11:02:46 gentoobox pppd[10739]: Script /usr/sbin/pppoe -p /var/run/pppoe.conf-adsl.pid.pppoe -I eth0 -T 80 -U -m 1412 -D /tmp/pppoe-debug-10682/pppoe-debug.txt-0 finished (pid 10740), status = 0x100
May 5 11:02:46 gentoobox pppd[10739]: Exit.
Wed May 5 11:02:46 EST 2004
---------------------------------------------
* The following section is a dump of the packets
* sent and received by rp-pppoe. If you don't see
* any output, it's an Ethernet driver problem. If you only
* see three PADI packets and nothing else, check your cables
* and modem. Make sure the modem lights flash when you try
* to connect. Check that your Ethernet card is in
* half-duplex, 10Mb/s mode. If all else fails,
* try using pppoe-sniff.
rp-pppoe debugging dump
rp-pppoe-3.5
11:02:11.118 SENT PPPoE Discovery (8863) PADI sess-id 0 length 12
SourceAddr 00:08:a1:36:d2:14 DestAddr ff:ff:ff:ff:ff:ff
01 01 00 00 01 03 00 04 f4 29 00 00 .........)..

11:02:16.109 SENT PPPoE Discovery (8863) PADI sess-id 0 length 12
SourceAddr 00:08:a1:36:d2:14 DestAddr ff:ff:ff:ff:ff:ff
01 01 00 00 01 03 00 04 f4 29 00 00 .........)..

11:02:26.109 SENT PPPoE Discovery (8863) PADI sess-id 0 length 12
SourceAddr 00:08:a1:36:d2:14 DestAddr ff:ff:ff:ff:ff:ff
01 01 00 00 01 03 00 04 f4 29 00 00 .........)..



thanks guys
 
Old 05-07-2004, 01:56 PM   #2
ScooterB
Member
Contributing Member
 
Registered: Sep 2003
Location: NW Arkansas
Distribution: Linux Redhat 9.0, Fedora Core 2,Debian 3.0, Win 2K, Win95, Win98, WinXp Pro
Posts: 344

Rep: Reputation: 31
I did not read through all of your post. It's Friday and my brain is fried. I can tell you I found out that my ISP for my ADSL does not allow any ping and shuts down most ICMP traffic. They said it was a corporate decision and is throughout their network. I don't think they are in your part of the world but yours may have a similar policy.
 
  


Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
default gateway not set by PPPoE, can't ping internet rproffit Linux - Networking 3 12-17-2007 05:29 AM
ADSL Connection connected but can't ping any site? subaruwrx Debian 22 11-10-2005 05:27 PM
A probleam about wireless ethernet card used PPPOE protocol dial-up connected interne yjftwo Linux - Wireless Networking 5 11-25-2004 05:02 AM
Slack 10 DSL Connected Can't ping evanmars Slackware 2 09-29-2004 05:55 PM
Modem seems to be up and connected but can't load pages in Mozilla or ping a thing blixblix Mandriva 12 09-22-2003 10:13 PM

LinuxQuestions.org > Forums > Linux Forums > Linux - Networking

All times are GMT -5. The time now is 09:01 AM.

Contact Us - Advertising Info - Rules - Privacy - LQ Merchandise - Donations - Contributing Member - LQ Sitemap -
Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Open Source Consulting | Domain Registration