LinuxQuestions.org - [SOLVED] routing tables

hello i have the following network setup, i need to access the http server at 192.168.0.1 from the computer at 192.168.5.21, the diagram goes as follows:

Code:

computer

192.168.5.21 (static)

  |

  |

  |

192.168.5.10 (static)

router

192.168.0.60 (dhcp)

  |

  |

  |

192.168.0.1 (default)

modem

(public ip)

  |

  |

  |

  |

the internet

i have been very confused about this, if the modem changes its ip to 192.168.1.254 then I can browse it just fine from computer, however it stops working with the ip 192.168.0.1

the routing tables for computer are:

Code:

Destination    Gateway        Genmask        Flags Metric Ref    Use Iface

192.168.5.0    0.0.0.0        255.255.255.0  U    0      0        0 eth0

0.0.0.0        192.168.5.10  0.0.0.0        UG    0      0        0 eth0

the routing tables for router are:

Code:

Destination    Gateway        Genmask        Flags Metric Ref    Use Iface

0.0.0.0        192.168.0.1    0.0.0.0        UG    0      0        0 eth1

192.168.0.0    0.0.0.0        255.255.255.0  U    0      0        0 eth1

192.168.5.0    0.0.0.0        255.255.255.0  U    0      0        0 eth0

thanks for your help!