Heya Lucifer,
Okay, you've downloaded the current Orinoco driver, Correct? Pretty much all you have to do is (in console) type: "su" then your root password, "neat" after you log in as root (through console), this should bring up a window called "Network Configuration", in there go to the Devices Tab -> Add... -> click "Wireless Connection" -> and the "orinoco_pci" driver should be listed. Click Ok, and go through the steps to configure the card for your WAP (wireless access point), when all is said and done, make sure to click on the option to activate the wireless card on startup if you go ahead and "Edit" the wireless device back in the Devices Tab.
Almost done....
Now, go back to console and type in (while still root) $:gedit /etc/modules.conf and add a new line to the bottom which says "alias eth* (*=whatever device you set your wiress at; ie eth0) orinoco_pci"
Save this file, reboot your box, and you should be up and running. I hope this (brief) tutorial was of some help. Post here again if you need some additional assistance.
Good Luck!
|