hi
Please advice to let my built-in ethernet adapter intel pro/100 VM brought up in boot
I installed this on mandrake 7.0 which does not know this module
I download it fron intel and build it, it seem correct
but my problem when I use netconf to configure the adapter it does not appear , I try to recompile my kernel
by make menuconfig
I don't suucessed to get it work
advice please



> Hi,
> thanks for info
> please now e100.0 is install on the PC manually
> insmod e100
> ifconfig eth0 .....
> route add 0.0.0.0 ....
> it correct
>
> now e100 modules does not appear in the list of netconf adapter why,
> but once I reboot this module does bring up on boot automatically,
> what can
> I do to fix
>
>
> /etc/conf.modules
>
> alias net-pf-4 ipx
> alias block-major-11 scsi_hostadapter
> post-install usb-storage modprobe usbkbd; modprobe keybdev
> alias scsi_hostadapter dc395x_trm
> alias parport_lowlevel parport_pc
> pre-install pcmcia_core /etc/rc.d/init.d/pcmcia start
> pre-install plip modprobe parport_pc ; echo 7 > /proc/parport/0/irq
> post-install supermount modprobe scsi_hostadapter
> alias eth0 e100
> ~
> please advice
>
> ----- Original Message -----
> From: "Tom Murphy" <freyason@yahoo.com>
> To: "dahmani nouredine" <dahmani@meteo.dz>
> Sent: Sunday, December 30, 2001 11:09 PM
> Subject: Re: intel pro/100 VM embedded compaq P IV
>
>
> >
> > > please I m in lose my ether adapter can t bring up, I ve insmod
> > > eepro100 nothing happened what matter have you any idea or you
> know
> > > any equivaltent drives
> > >
> > > please advice
> >
> > Hi Dahmani,
> >
> > You have to go to www.intel.com and download the linux source
> for
> > the e100 driver and compile it as a module (e100.o) and use that
> > instead of the eepro100 module. I have tried to get in contact with
> the
> > eepro100 maintainers but they don't seem to be responsive.
> >
> >
>
http://downloadfinder.intel.com//scr...?ProductID=246
> >
> > Sorry for the long URL. Intel's site has insanely long URL's. If
> that
> > fails, go to intel's site, click on "Support", search for "pro/100"
> and
> > it'll take you to a link to select your operating system. Select
> Linux,
> > and it should take you down to the driver.
> >
> > Hope this helps!
> >
> > Tom
> >
> > __________________________________________________
> > Do You Yahoo!?
> > Send your FREE holiday greetings online!
> > http://greetings.yahoo.com
>


__________________________________________________
Do You Yahoo!?