pptpconfig ip loop
Hi all. I'm having a small problem getting pptpconfig working properly. What I want to do is connect my server to a cisco VPN (not using any encryption to make things simple).
I did finally get connected and things seem to be working only I get HUGE data traffic and nothing really seems to go through the VPN tunnel. Here is the debug output (sensitive data changed to protect the guilty): Quote:
|
Looks like pppd didn't exit..
There's still a route and an interface named after it was said to have died.. Do ps ax and see if it's still listed. killall pppd to remove it/them |
The problem is that during the connection, I get massive transfer rates on the ppp0 (only sending packets) interface. At least that's what the network monitor applet is showing me.
When I hit stop, it does exit and the routes are put back to what they where originally. |
[HTML]
Perhaps I can try to explain the connection I'm trying to make. Internet VPN -----------/ \------------------| firewall |-------------------------------------| client IP: 192.0.86.254 193.193.200.200 192.168.0.1 192.168.0.2 subnet: 255.255.255.0 255.255.255.252 255.255.255.0 255.255.255.0 Both the external and internal IP address of the VPN is the same and will give the client an address: 192.0.86.11. When i start pptpconfig and run ifconfig I indeed see the interface ppp0 get the address but you are right though that pppd does not exit. When I kill it the ppp0 interface goes away. I'm guessing that either I am missing something fundamental or forgotten to do something very minor but necessary. [/HTML] |
All times are GMT -5. The time now is 08:01 AM. |