I am tring to set up a freerauius PPPoE Network Auth server. It Authenticates fine localhost but when i try to attace a pppoe device i am unable to get it to connect.
I can connect to the box via ssh and Http fine.
from the box
Code:
radtest test-user test-pass localhost 1812 testing123
i get
Code:
Sending Access-Request of id 247 to 127.0.0.1 port 1812
User-Name = "test-user"
User-Password = "test-pass"
NAS-IP-Address = 255.255.255.255
NAS-Port = 1812
rad_recv: Access-Accept packet from host 127.0.0.1:1812, id=247, length=26
Framed-IP-Address = 192.168.1.201
witch seems to say that it's working. when i view the log files,
from freeradius
Code:
Thu Mar 5 11:34:23 2009 : Info: Ready to process requests.
from messages i get
Code:
Mar 5 11:34:34 PPPoE kernel: [ 180.326953] NET: Registered protocol family 10
Mar 5 11:34:34 PPPoE kernel: [ 180.327238] lo: Disabled Privacy Extensions
Mar 5 11:54:19 PPPoE -- MARK --
Mar 5 12:14:19 PPPoE -- MARK --
Mar 5 12:34:19 PPPoE -- MARK --
Mar 5 12:54:19 PPPoE -- MARK --
Mar 5 13:14:19 PPPoE -- MARK --
Mar 5 13:34:19 PPPoE -- MARK --
Mar 5 13:54:19 PPPoE -- MARK --
Mar 5 14:14:19 PPPoE -- MARK --
The Interfaces
Code:
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
auto eth0
iface eth0 inet dhcp
#The PPPoE interface
auto eth1
iface eth1 inet static
address 0.0.0.0
~
Anyone have any ideas what could be causing the problem?