nic receives but doesn't transmit
I have an intel pro 1000 mt nic installed using Red Hat 2.6.9-42.0.3.EL. When pinging from another machine , I can see that it receives the packets but it is not transmitting. This is on a private network. here is the routing table of the machine that cannot transmit. Built and loaded the module with the default settings...
192.168.2.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1
169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0
0.0.0.0 192.168.1.254 0.0.0.0 UG 0 0 0 eth1
where eth0 is the interface...
output from ifconfig
eth0 Link encap:Ethernet HWaddr 00:07:E9:0F:70:FF
inet addr:192.168.2.100 Bcast:192.168.2.255 Mask:255.255.255.0
inet6 addr: fe80::207:e9ff:fe0f:70ff/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:69 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:6762 (6.6 KiB) TX bytes:0 (0.0 b)
Base address:0xa800 Memory:df000000-df020000
Any ideas?
thanks
|