|
Newbie overwhelmed with setting up a wireless connection
After may hours of frustration, I finally installed Ubuntu 12.04.3 Lts. But now need help setting up the wireless connection. I'm overwhelmed with the glossary and information needed.
The router is Asus-RTN56u and running well with XP laptop and 2 Mac and a wireless printer. The Wireless Connection SSID: Asus Mode: ? BSSID: ? Mac Address: I have Cloned Mac Address: ? & why MTU: ? Wireless Security Security: WPA&WPA2 Password: xxxxxx IPv4 Setting Method: ? and why DHCP client I1 ? IPv6 Setting Method ? and why Also while we are at it what would the setting be for the wired connection? We have 2 Mac, 1 HP"Linux"laptop and 1 wireless printer running from this router. Also, will the laptop be able to connect in public with these settings? Thanks |
You can see a networking icon on the panel.
Right click on it and select Enable wireless. You can check the wireless connections, when you left click on the notification icon. If you are not able to see connections. Right click on notification icon and click on Edit connections. Select wireless tab > Click on Add > Select IPV4 > Select method Automatic (DHCP - Dynamic Host Configuration Protocol ) > click on Apply Now you will be able to see this added connection in the list, when you left click on the notification icon. Select the connection and wireless connection will be activated. |
Hi,
sorry it did not work. When I Save, (there is no Apply), it goes to Network Connections with Wireless Tab opened. Wireless connection 1 is highlighted with a "never" . If I click Add, I have to re-enter all the info again. Edit brings back to the previous screen. I'll show what I have: Connection name : Wireless connection 1 Connect Automatically: on Wireless SSID : asus Mode : infrastructure (default) BSSID : blank Device MAC address: xx.xx.xx.xx.xx.xx Cloned MAC address: blank MTU : Automatic (default) IPv4 Settings Method : Automatic (DHCP) (default) DHCP client ID: prompt but I left blank IPv6 Settings Method: Automatic (default) Wireless Security Security: I tried with the 7 different choices illustrated. To me the WPA & WPA2 Personal should the one because the router Authentication is WPA-Auto-Personal and I have the WPA-PSK key. But when I Save it goes to Network Connections with the Wireless tab window open. ??? |
It sounds as if the wireless drivers may not be installed; some wireless chipsets are more difficult to get working than others. It's not that Linux does not support the wireless cards; it is that the wireless card manufacturers do not support Linux, at least not very well.
What make/model computer and what wireless chipset? Running the command lspci in a terminal should answer the second question. Post the portion of the output of the command relevant to the wireless here, being sure to surround it with "code" tags, which become available when you click the "Go Advanced" button to the right of the "Post Quick Reply" button at the bottom of the reply window. |
Hi,
I think I'm way in over my head with this... I'm running a HP Pavilion dv 5040us notebook pc with AMD Turion64 mobile technology. I can't get the lspi right now , i'm downloading a newer version of ubuntu. But I can give you the Broadcom 802.11a/b/g WLAN driver details C:\WIDOWS \system32bcmwlcoi.dll and C:\WINDOWS\system32\DRIVERS\BCMWL5.SYS also the Device Instance Id: PCl\VEN_14E4&DEV_4319&SUBSYS_1358103C&REV_02\4&13826118&0&1044 if this is any help Also Realtek RTL8139 Family PCI Fast Ethernet NIC #2 driver detailsC:\WINDOWS\system32\DRIVERS\RLT8139sys and the Device Incidence Id: PCI\VEN10EC&DEV_8139&SUBSYS_30A4103&REV_10\4\13826118&0&30A4 thanks for your patience |
Broadcom can be problematical. It often takes an extra step or two to get it working.
This post might help get you started. http://www.linuxquestions.org/questi...ux-4175434970/ |
Hi, I'm back,
I don't know if I'm posting right. Also, why is it difficult to log out. After I submit my post I should be able to click on "log out" and I'm gone, but it is not happening every time. |
Hi,
I'm back again. Is there a tutorial for posting? Last night I posted the status of my installation, but it vanished. Also finding my thread and loging out, "codes" and "Go Advanced", newbies have to learn everything at the same time. I got it connected with cable and installed it. This is my first post with Linux... Then a wireless driver update was ready to download for my Broadcom 802.11. After trying to install it, this message appeared: "Please have a look at the log file for details : var/log/jockey.log" Previously I tried to get the lspci with different extractors, but failed,(very little info). Tried Microsoft Devcon but could not unzip it, somehow IE and WINZIP could not locate a file. Would Broadcom technical support help or this a no no for Linux? or is it a waste of time? I'm impressed with Linux community and Ubuntu desktop. Regards I |
Regarding logging out, the "remember me" checkbox is checked by default. Make sure you uncheck it.
As for posting, there are several tutorials about how to get the most out of Linux Questions: http://www.linuxquestions.org/linux/...xQuestions_org. You might start with the one on how to ask a question; it helped me a lot when I was new in these parts. You can take a look at that log file; this article provides a good summary of ways to do so from the command line. lspci is a command; you don't have to "get" it, it's already there. Open a terminal and type lspci and you'll get something like this (note that the computer I'm using does not have wireless, so there is no wireless-related information): Code:
:~$ lspciLinux is different. Not harder, just different. Expect it to be different, take your time, and you will be okay. We'll be happy to help. Remember, there was a learning curve with your previous OS; you just didn't notice it. |
| All times are GMT -5. The time now is 04:18 AM. |