LinuxQuestions.org
Share your knowledge at the LQ Wiki.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Networking
User Name
Password
Linux - Networking This forum is for any issue related to networks or networking.
Routing, network cards, OSI, etc. Anything is fair game.

Notices


Reply
  Search this Thread
Old 09-27-2016, 07:15 AM   #1
Bashed
Member
 
Registered: Jul 2015
Posts: 133

Rep: Reputation: Disabled
Need Cisco Rate Limit help and Observium Help


I've been using Observium for a while and there seems to be some discrepancies between my graphs and the upstream (my data center provides me Ethernet GigE bandwidth). For example, from around 8am to 12pm today it showed overall utilization pretty consistent well above 400Mbps.

I have two drops from them: primary and secondary (redundant). Plus, they both show active instead of active/passive. Not sure if that has anything to do with it.

These switches are actually trunked (2 x 3650 L3 switches). In the graph, it also shows the uplink connectivity calculated with the total utilization (VLAN2155). This is definitely not accurate as it shouldn't do that.

Example:
Drop #1 =  40Mbps
Drop #2 =  200Mbps
Uplink to Switch #2 = 130Mbps

Now as a result VLAN2155 (total utilization) is calculating not only #1 and #2 drops from the upstream, but even the trunk port labeled "Uplink to Switch #2".
How can I rectify this with Observium to avoid that and get an accurate output?

How do I add the 2nd switch as a device so it’s interfaces show up too? Right now, only the primary switches’ interfaces are there
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



Similar Threads
Thread Thread Starter Forum Replies Last Post
SMTP rate-limit circus78 Linux - Server 2 07-30-2016 08:00 PM
Postfix and rate limit circus78 Linux - Server 1 04-16-2012 11:39 PM
[SOLVED] IPTABLES Rate Limit AsadMoeen Linux - Security 4 03-16-2012 03:10 AM
tc - limit rate on VPN? qwertyjjj Linux - Server 1 11-08-2010 12:59 PM
How to limit upload rate? fernandomm Linux - Networking 1 05-31-2010 12:26 AM

LinuxQuestions.org > Forums > Linux Forums > Linux - Networking

All times are GMT -5. The time now is 05:42 AM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Open Source Consulting | Domain Registration